BS-ISO-17812-2007.pdf
《BS-ISO-17812-2007.pdf》由会员分享,可在线阅读,更多相关《BS-ISO-17812-2007.pdf(18页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS ISO 17812:2007 Paper, board and pulps Determination of total magnesium, total calcium, total manganese, total iron and total copper ICS 85.040; 85.060 ? Licensed Copy: London South Bank University, London South Bank University, Wed Jan 02 02:18:29 GMT+00:00 2008, Uncontrolled Cop
2、y, (c) BSI BS ISO 17812:2007 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2007 BSI 2007 ISBN 978 0 580 54030 1 National foreword This British Standard is the UK implementation of ISO 17812:2007. The UK participation in its prep
3、aration was entrusted to Technical Committee PAI/11, Methods of test for paper, board and pulps. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are respo
4、nsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments Licensed Copy: London South Bank University, London South Bank University, Wed Jan 02 02:18:29 GMT+00:00 2008, Uncontrolled
5、Copy, (c) BSI Reference number ISO 17812:2007(E) INTERNATIONAL STANDARD ISO 17812 First edition 2007-12-01 Paper, board and pulps Determination of total magnesium, total calcium, total manganese, total iron and total copper Papier, carton et ptes Dtermination de la teneur en magnsium total, en calci
6、um total, en manganse total, en fer total et en cuivre total BS ISO 17812:2007 Licensed Copy: London South Bank University, London South Bank University, Wed Jan 02 02:18:29 GMT+00:00 2008, Uncontrolled Copy, (c) BSI ii Licensed Copy: London South Bank University, London South Bank University, Wed J
7、an 02 02:18:29 GMT+00:00 2008, Uncontrolled Copy, (c) BSI iii Contents Page Foreword iv Introduction v 1 Scope . 1 2 Normative references. 1 3 Principle. 1 4 Reagents and materials . 2 5 Apparatus and equipment . 3 6 Sampling and preparation of sample 3 7 Procedure 3 8 Preparation of calibration sol
8、utions. 5 9 Blank solution. 6 10 Determination 6 11 Calculation. 7 12 Precision 7 13 Test report . 8 BS ISO 17812:2007 Licensed Copy: London South Bank University, London South Bank University, Wed Jan 02 02:18:29 GMT+00:00 2008, Uncontrolled Copy, (c) BSI iv Foreword ISO (the International Organiza
9、tion for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established
10、has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. In
11、ternational Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publi
12、cation as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent r
13、ights. ISO 17812 was prepared by Technical Committee ISO/TC 6, Paper, board and pulps. BS ISO 17812:2007 Licensed Copy: London South Bank University, London South Bank University, Wed Jan 02 02:18:29 GMT+00:00 2008, Uncontrolled Copy, (c) BSI v Introduction This International Standard combines the d
14、etermination of magnesium (Mg), calcium (Ca), manganese (Mn), iron (Fe) and copper (Cu) into one single standard. The scope of this International Standard includes the acid- soluble part of the elements plus that part of the elements that may remain insoluble after dissolution of the incineration re
15、sidue with hydrochloric acid. This International Standard is complementary to the following International Standards, which measure only the acid-soluble part of the element. ISO 777, Paper, board and pulp Determination of acid-soluble calcium ISO 778, Paper, board and pulp Determination of acid-solu
16、ble copper ISO 779, Paper, board and pulp Determination of acid-soluble iron ISO 1830, Paper, board and pulps Determination of acid-soluble manganese BS ISO 17812:2007 Licensed Copy: London South Bank University, London South Bank University, Wed Jan 02 02:18:29 GMT+00:00 2008, Uncontrolled Copy, (c
17、) BSI blank Licensed Copy: London South Bank University, London South Bank University, Wed Jan 02 02:18:29 GMT+00:00 2008, Uncontrolled Copy, (c) BSI 1 Paper, board and pulps Determination of total magnesium, total calcium, total manganese, total iron and total copper WARNING The method specified in
18、 this International Standard involves the use of some hazardous chemicals and of gases that can form explosive mixtures with air. Care should be taken to ensure the relevant precautions are observed. 1 Scope This International Standard specifies the procedure for the determination of total magnesium
19、, total calcium, total manganese, total iron and total copper by atomic absorption spectrometry or by plasma emission spectrometry. The total content comprises the acid-soluble part of the element plus the acid-insoluble part of the element. It is applicable to all types of paper, board and pulps. 2
20、 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 186, Paper and board Sa
21、mpling to determine average quality ISO 287, Paper and board Determination of moisture content of a lot Oven drying method ISO 638, Paper, board and pulps Determination of dry matter content Oven-drying method ISO 1762, Paper, board and pulps Determination of residue (ash) on ignition at 525 C ISO 7
22、213, Pulps Sampling for testing 3 Principle A test specimen is incinerated at 525 C and the residue is dissolved in 6 mol/l hydrochloric acid. If the resulting solution contains insoluble material, originating, for example, from fillers and coating formulations, these shall be destroyed. Two alterna
23、tive methods for destroying the insoluble material are included in this International Standard: hydrofluoric acid digestion (7.3.2) and fusion with alkali metal salts (7.3.3). This insoluble part should be combined with the original solution. This is to ensure complete recovery of elements that may
24、be occluded in the residue or combined with silicates. The concentration of each element in the test solution is then determined by atomic absorption or plasma emission spectrometry, as specified in this International Standard. BS ISO 17812:2007 Licensed Copy: London South Bank University, London So
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS ISO 17812 2007
链接地址:https://www.31doc.com/p-3747004.html