BS-ISO-2385-1993.pdf
《BS-ISO-2385-1993.pdf》由会员分享,可在线阅读,更多相关《BS-ISO-2385-1993.pdf(10页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS ISO 2385:1993 Implementation of ISO 2385:1993 Corkwood in planks, virgin cork, cleanings, cork pieces, corkwood refuse and corkwaste Sampling to determine moisture content UDC 674.83:620.113 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 07:26:27 GMT+00:00 2006, Uncontrol
2、led Copy, (c) BSI BS ISO 2385:1993 This British Standard, having been prepared under the direction of the Plastics and Rubber Standards Policy Committee, was published under the authority of the Standards Board and comes into effect on 15 March 1994 BSI 01-2000 The following BSI references relate to
3、 the work on this standard: Committee reference PRM/60 Draft for comment 90/41263 DC ISBN 0 580 23021 X Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Rubber and Plastics Standards Policy Committee (PRM/-) to Technical Committee PRM/60,
4、 upon which the following bodies were represented: British Adhesives and Sealants Association British Board of Agrment British Floor Covering Manufacturers Association British Railways Board British Rubber Manufacturers Association Ltd. Consumer Policy Committee of BSI Contract Flooring Association
5、Cork Industry Federation Department of the Environment (Building Research Establishment) Federation of Plastering and Drywall Contractors Health Care Supplies South West Royal Institute of British Architects Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffiel
6、dun, na, Mon Nov 27 07:26:27 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 2385:1993 BSI 01-2000i Contents Page Committees responsibleInside front cover National forewordii Forewordiii Text of ISO 23851 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 07:26:27 GMT+00:00 2006, Uncontrolled
7、Copy, (c) BSI BS ISO 2385:1993 ii BSI 01-2000 National foreword This British Standard reproduces verbatim ISO 2385:1993 and implements it as the UK national standard. This British Standard is published under the direction of the Plastics and Rubber Standards Policy Committee whose Technical Committe
8、e PRM/60 has the responsibility to: aid enquirers to understand the text; present to the responsible international committee any enquiries on interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK
9、. NOTEInternational and European Standards, as well as overseas standards, are available from Customer Services, Publications, BSI, Linford Wood, Milton Keynes, MK14 6LE. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are respons
10、ible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the ISO title page, pages ii to iv, page 1 and a back cover. This standard
11、has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 07:26:27 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Licensed Copy: sheffieldun sheffieldun,
12、na, Mon Nov 27 07:26:27 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 2385:1993(E) ii BSI 01-2000 Contents Page Forewordiii 1Scope1 2Normative references1 3Definitions1 4General1 5Sampling method1 6Sampling report1 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 07:26:27 GMT+00:00 2006, Unco
13、ntrolled Copy, (c) BSI ISO 2385:1993(E) BSI 01-2000iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees.
14、 Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the Interna
15、tional Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bod
16、ies casting a vote. International Standard ISO 2385 was prepared by Technical Committee ISO/TC 87, Cork. This second edition cancels and replaces the first edition (ISO 2385:1972), of which it constitutes a technical revision. Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 07:26:27 GMT+00:00
17、 2006, Uncontrolled Copy, (c) BSI iv blank Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 07:26:27 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 2385:1993(E) BSI 01-20001 1 Scope This International Standard applies to packed cork and specifies the method of sampling corkwood in planks, virg
18、in cork, cleanings, cork pieces, corkwood refuse and corkwaste. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS ISO 2385 1993
链接地址:https://www.31doc.com/p-3747092.html