BS-EN-62282-5-1-2007.pdf
《BS-EN-62282-5-1-2007.pdf》由会员分享,可在线阅读,更多相关《BS-EN-62282-5-1-2007.pdf(56页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 62282-5-1:2007 Fuel cell technologies Part 5-1: Portable fuel cell power systems Safety The European Standard EN 62282-5-1:2007 has the status of a British Standard ICS 27.070 ? Licensed Copy: London South Bank University, London South Bank University, Wed Aug 08 03:58:59 GMT+
2、00:00 2007, Uncontrolled Copy, (c) BSI BS EN 62282-5-1:2007 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2007 BSI 2007 ISBN 978 0 580 53773 8 National foreword This British Standard is the UK implementation of EN 62282-5-1:2007. It
3、 is identical to IEC 62282-5-1:2007. The UK participation in its preparation was entrusted to Technical Committee GEL/105, Fuel cell technologies. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the n
4、ecessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments Licensed Copy: London South Bank University, London South Bank University,
5、 Wed Aug 08 03:58:59 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD EN 62282-5-1 NORME EUROPENNE EUROPISCHE NORM June 2007 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Ce
6、ntral Secretariat: rue de Stassart 35, B - 1050 Brussels 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62282-5-1:2007 E ICS 27.070 English version Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
7、 (IEC 62282-5-1:2007) Technologies des piles combustible - Partie 5-1: Systmes piles combustible portables - Scurit (CEI 62282-5-1:2007) Brennstoffzellentechnologien - Teil 5-1: Portable Brennstoffzellen- Energiesysteme - Sicherheit (IEC 62282-5-1:2007) This European Standard was approved by CENELEC
8、 on 2007-06-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards
9、may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified
10、to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Lu
11、xembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: London South Bank University, London South Bank University, Wed Aug 08 03:58:59 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 62282-5-1:2007 2 Fo
12、reword The text of document 105/135/FDIS, future edition 1 of IEC 62282-5-1, prepared by IEC TC 105, Fuel cell technologies, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62282-5-1 on 2007-06-01. The following dates were fixed: latest date by which the EN has to be
13、 implemented at national level by publication of an identical national standard or by endorsement (dop) 2008-03-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2010-06-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the Intern
14、ational Standard IEC 62282-5-1:2007 was approved by CENELEC as a European Standard without any modification. _ Licensed Copy: London South Bank University, London South Bank University, Wed Aug 08 03:58:59 GMT+00:00 2007, Uncontrolled Copy, (c) BSI 3 EN 62282-5-1:2007 CONTENTS 1 Scope 5 1.1 System b
15、oundary.6 1.2 Equivalent level of safety.7 1.3 General statements .7 2 Normative references .7 3 Terms and definitions .10 4 Requirements.14 4.1 Physical environment and operating conditions 14 4.2 Material compatibility.14 4.3 Protection against mechanical hazards 15 4.4 Protection against toxicity
16、 of fuels and fuel feedstocks .15 4.5 Protection against explosion hazards .15 4.6 Protection against electric shock16 4.7 Protection against fire hazard 22 4.8 Protection against temperature hazard.24 4.9 Protection against electromagnetic disturbances 25 4.10 Hazard and risk assessment 25 4.11 Pro
17、tection against oxygen depletion.26 4.12 Emission of effluents .26 5 Construction.26 5.1 Fuel supply26 5.2 Fuel processing systems27 5.3 Enclosures 27 5.4 Battery supplies.27 5.5 Pressure vessels and piping 28 5.6 Hoses29 5.7 Automatic shut-off valves.29 5.8 Regulators.29 5.9 Process control equipme
18、nt.30 5.10 Filters30 5.11 Motors.30 5.12 Fuel pumps .30 6 Instructions 30 6.1 Operation and maintenance manual .30 6.2 Users information manual .32 7 Labelling 34 7.1 General.34 7.2 Marking.34 7.3 Warnings.34 8 Type tests 35 8.1 Leakage test for liquid fuelled systems.35 8.2 Flammable fuel gas conce
19、ntration test .36 8.3 Surface temperatures 36 Licensed Copy: London South Bank University, London South Bank University, Wed Aug 08 03:58:59 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 62282-5-1:2007 4 8.4 Component temperatures.36 8.5 Wall, floor and ceiling temperatures .37 8.6 Dielectric streng
20、th37 8.7 Leakage current at operating temperature38 8.8 Abnormal operation .38 8.9 Strain relief39 8.10 Insulating material .39 8.11 Earthing test39 8.12 Tank pressure test.39 8.13 Stability.40 8.14 Impact test 40 8.15 Free drop test41 8.16 Adhesion and legibility of marking materials .41 8.17 Flamm
21、able gas accumulation.41 8.18 Oxygen depletion.42 8.19 Emission of effluents Closed room 43 8.20 Emission of effluents Open room.43 8.21 Wind test.44 8.22 Strength test44 8.23 Stress relief test 45 8.24 Fuel supply securement test 45 8.25 Shut-down parameters.46 9 Routine tests 46 9.1 Gas leakage te
22、st .46 9.2 Dielectric strength test.46 Annex A (informative) Ventilation rate for valve regulated lead acid batteries 47 Annex B (normative) Uncertainty of measurements.48 Annex ZA (normative) Normative references to international publications with their corresponding European publications50 Bibliog
23、raphy .49 Figure 1 Portable fuel cell power systems.6 Licensed Copy: London South Bank University, London South Bank University, Wed Aug 08 03:58:59 GMT+00:00 2007, Uncontrolled Copy, (c) BSI 5 EN 62282-5-1:2007 FUEL CELL TECHNOLOGIES Part 5-1: Portable fuel cell power systems Safety 1 Scope This pa
24、rt of IEC 62282 covers construction, marking and test requirements for a.c. and d.c. type portable fuel cell systems. These fuel cell systems are movable and not fastened or otherwise secured to a specific location. The purpose of the portable fuel cell system is to produce useable power. This stand
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 62282 2007
链接地址:https://www.31doc.com/p-3747129.html