BS-ISO-3547-4-2006.pdf
《BS-ISO-3547-4-2006.pdf》由会员分享,可在线阅读,更多相关《BS-ISO-3547-4-2006.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS ISO 3547-4:2006 Plain bearings Wrapped bushes Part 4: Materials ICS 21.100.10 ? Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 06:43:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 3547-4:2006 This British Standard was published under the authority of the Standards P
2、olicy and Strategy Committee on 30 November 2006 BSI 2006 ISBN 0 580 49526 4 National foreword This British Standard was published by BSI. It is the UK implementation of ISO 3547-4:2006. It supersedes BS ISO 3547-4:1999 which is withdrawn. The UK participation in its preparation was entrusted to Tec
3、hnical Committee MCE/12, Plain bearings. A list of organizations represented on MCE/12 can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British St
4、andard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 06:43:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Reference number ISO 3547-4:2006(E) INTERNATIONAL STANDARD ISO 3547-4 Second edit
5、ion 2006-10-15 Plain bearings Wrapped bushes Part 4: Materials Paliers lisses Bagues roules Partie 4: Matriaux BS ISO 3547-4:2006 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 06:43:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 06:43
6、:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Eac
7、h member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the Internation
8、al Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standard
9、s adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject o
10、f patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 3547-4 was prepared by Technical Committee ISO/TC 123, Plain bearings, Subcommittee SC 3, Dimensions, tolerances and construction details. This second edition cancels and replaces the first edition
11、(ISO 3547-4:1999), which has been technically revised. ISO 3547 consists of the following parts, under the general title Plain bearings Wrapped bushes: Part 1: Dimensions Part 2: Test data for outside and inside diameters Part 3: Lubrication holes, grooves and indentations Part 4: Materials The foll
12、owing parts are under preparation: Part 5: Checking the outside diameter Part 6: Checking the inside diameter Part 7: Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes BS ISO 3547-4:2006 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 06:43:59 GMT+00:00 2006, U
13、ncontrolled Copy, (c) BSI blank Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 06:43:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 1 Plain bearings Wrapped bushes Part 4: Materials 1 Scope This part of ISO 3547 gives specifications for solid and multi-layer bearing materials, such as are use
14、d for wrapped bushes in accordance with the other parts of ISO 3547. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced do
15、cument (including any amendments) applies. ISO 3547-1:2006, Plain bearings Wrapped bushes Part 1: Dimensions ISO 3547-2, Plain bearings Wrapped bushes Part 2: Test data for outside and inside diameters ISO 3547-3, Plain bearings Wrapped bushes Part 3: Lubrication holes, grooves and indentations ISO
16、4378-1, Plain bearings Terms, definitions and classification Part 1: Design, bearing materials and their properties ISO 4382-2, Plain bearings Copper alloys Part 2: Wrought copper alloys for solid plain bearings ISO 4383, Plain bearings Multilayer materials for thin-walled plain bearings ISO 4384-1,
17、 Plain bearings Hardness testing of bearing metals Part 1: Compound materials ISO 4384-2, Plain bearings Hardness testing of bearing metals Part 2: Solid materials 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 4378-1 apply. 4 Requirements 4.1 Chemi
18、cal analysis Chemical analysis shall be definitive for the acceptance of the bearing metals. Arbitrary analyses or random sampling operations shall be performed in accordance with recognized methods and agreed between the supplier and user. BS ISO 3547-4:2006 Licensed Copy: sheffieldun sheffieldun,
19、na, Sun Nov 26 06:43:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 2 4.2 Hardness values The hardness values indicated in Tables 1 and 2 are typical for each of the materials concerned. In practice, composition and processing variables can result in significant variations in hardness. Hardness speci
20、fications shall be agreed between the supplier and user. Table 1 Solid materials Key Designationa Hardnessb (guide values) HB 2,5/62,5/10 Notes relating to use Wall thickness limit deviation seriesc Z1 Steel (hardened) Suitable for secondary applications with lightly loaded sliding characteristics.
21、A Y1 120 Y2 CuSn8P 150 Very high load capacity, good antifrictional property, e.g. for vehicles, transmissions, conveyor systems and agricultural machinery. W1 110 W2 CuZn31Si 140 High load capacity, good antifrictional properties, e.g. for textile machinery, motor vehicles and agricultural machiner
22、y and lifts. A, C, W a Steel composition shall be agreed between supplier and user. It will normally have a carbon content of less than 0,25 %; composition of bearing material in accordance with ISO 4382-2. b Hardness testing in accordance with ISO 4384-2. c In accordance with ISO 3547-1:2006, Table
23、s 5 and 6. BS ISO 3547-4:2006 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 06:43:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 3 Table 2 Multi-layer materials Designationa Hardnessb (guide values) Key Backing material Bearing material Backing materialc Bearing material Notes relating to us
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS ISO 3547 2006
链接地址:https://www.31doc.com/p-3747203.html