BS-EN-ISO-8618-1998 BS-2782-4-METHOD-451M-1998.pdf
《BS-EN-ISO-8618-1998 BS-2782-4-METHOD-451M-1998.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-8618-1998 BS-2782-4-METHOD-451M-1998.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 8618:1998 BS 2782-4: Method 451M: 1998 Plastics Liquid phenolic resins Conventional determination of non-volatile matter The European Standard EN ISO 8618:1998 has the status of a British Standard ICS 83.080.10 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:19:1
2、4 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 8618:1998 This British Standard, having been prepared under the direction of the Sector Board for Materials and Chemicals, was published under the authority of the Standards Board and comes into effect on 15 August 1998 BSI 05-1999 ISBN 0 580 30
3、055 2 National foreword This British Standard is the English language version of EN ISO 8618:1998. It is identical with ISO 8618:1995. It supersedes BS EN ISO 8618:1995 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PRI/21, Testing of plastics, which
4、 has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them
5、in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references Attention is drawn to the fact that CEN and CENELEC standards normally include an annex which lists normative references to international publications with their correspondi
6、ng European publications. The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standa
7、rds Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of page
8、s This document comprises a front cover, an inside front cover, pages i and ii, the EN ISO title page, page 2, the ISO title page, page ii, pages 1 to 3 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amend
9、ment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:19:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 8618:1998 BSI 05-1999i Contents Page National forewordInside front cover Foreword2 Forew
10、ordii Text of ISO 86181 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:19:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:19:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN
11、ISO 8618 June 1998 ICS 83.080.10Supersedes EN ISO 8618:1995 Descriptors: See ISO document English version Plastics Liquid phenolic resins Conventional determination of non-volatile matter (ISO 8618:1995) Plastiques Rsines phnoliques liquides Dtermination de lextrait sec conventionnel (ISO 8618:1995)
12、 Kunststoffe Flssige Phenolharze Konventionsverfahren zur Bestimmung der nichtflchtigen Anteile (ISO 8618:1995) This European Standard was approved by CEN on 24 May 1998. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
13、 Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, Fr
14、ench, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, D
15、enmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 3
16、6, B-1050 Brussels 1998 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 8618:1998 E Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:19:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 8618:1998 BSI 05-1999 2 Forew
17、ord The text of the International Standard from Technical Committee ISO/TC 61 “Plastics” of the International Organization for Standardization (ISO) has been taken over as an European Standard by Technical Committee CEN/TC 249 “Plastics”, the secretariat of which is held by IBN. This European Standa
18、rd replaces EN ISO 8618:1995. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 1998, and conflicting national standards shall be withdrawn at the latest by December 1998. According to the
19、CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Swe
20、den, Switzerland and the United Kingdom. Endorsement notice The text of the International Standard ISO 8618:1995 has been approved by CEN as a European Standard without any modification. Contents Page Foreword2 1Scope1 2Definition1 3Apparatus1 4Procedure1 5Expression of results1 6Test report1 Annex
21、A (normative) Special procedures for testing at 150 C3 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:19:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:19:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 8618:1998 ii BSI 05-1999
22、 Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a
23、technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matter
24、s of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 8618 wa
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-ISO-8618-1998 BS-2782-4-METHOD-451M-1998 BS EN ISO 8618 1998 2782 METHOD 451
链接地址:https://www.31doc.com/p-3747206.html