BS-EN-ISO-10062-1995.pdf
《BS-EN-ISO-10062-1995.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-10062-1995.pdf(16页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 10062:1995 Incorporating Amendment No. 1 Corrosion tests in artificial atmospheres at very low concentrations of polluting gas(es) The European Standard EN ISO 10062:1995 has the status of a British Standard Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 08:55:21 G
2、MT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 10062:1995 This British Standard, having been prepared under the direction of the Iron and Steel and Non-ferrous Metals Standards Policy Committees, was published under the authority of the Standards Board and comes into effect on 28 February 1992
3、BSI 04-2000 The following BSI references relate to the work on this standard: Committee reference ISM/NFM/8 Draft for comment 89/47252 DC ISBN 0 580 20599 1 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Iron and Steel Standards Policy
4、Committee (ISM/-) and the Non-ferrous Metals Standards Policy Committee (NFM/-) to Technical Committee ISM/NFM/8, upon which the following bodies were represented: Aluminium Federation British Gas plc British Steel Industry Department of Trade and Industry (National Physical Laboratory) Department o
5、f Transport (Transport and Road Research Laboratory) Electricity Industry in United Kingdom Institute of Corrosion Institution of Structural Engineers Society of Chemical Industry United Kingdom Atomic Energy Authority Welding Institute Amendments issued since publication Amd. No.DateComments 8615Au
6、gust 1995 Indicated by a sideline in the margin Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 08:55:21 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 10062:1995 BSI 04-2000i Contents Page Committees responsibleInside front cover National forewordii Foreword2 Text of EN ISO 100623 Publ
7、ication(s) referred toInside back cover Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 08:55:21 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 10062:1995 ii BSI 04-2000 National foreword This British Standard has been prepared under the direction of the Iron and Steel and Non-ferrous M
8、etals Standards Policy Committees. It is identical with ISO 10062:1991 “Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)” published by the International Organization for Standardization (ISO). In 1995 the European Committee for Standardization (CEN) accepted I
9、SO 10062:1991 as European Standard EN ISO 10062:1995. As a consequence of implementing the European Standard this British Standard is renumbered as BS EN ISO 10062 and any reference to BS 7561 should read as a reference to BS EN ISO 10062. The Technical Committee has reviewed the provisions of ISO 5
10、54 and ISO 558, to which reference is made in the text, and has decided that they are acceptable for use in conjunction with this standard. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct applicat
11、ion. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-references International StandardCorresponding British Standard ISO 7384:1986BS 6917:1987 Method for corrosion testing in artificial atmospheres: general principles (Identical) ISO 8407:1991BS 75
12、45:1992 Method for removal of corrosion products from corrosion test specimens of metals and alloys (Identical) Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN ISO title page, pages 2 to 10, an inside back cover and a back cover. This standard ha
13、s been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 08:55:21 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISC
14、HE NORM EN ISO 10062 February 1995 ICS 77.060 Descriptors: Metals, corrosion, atmospheric corrosion, tests, corrosion tests, test atmospheres English version Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) (ISO 10062:1991) Essais de corrosion en atmosphre art
15、ificielle trs basse concentration de gaz polluant(s) (ISO 10062:1991) Korrosionsprfungen in knstlicher Atmosphre mit sehr niedrigen Konzentrationen von Schadgasen (ISO 10062:1991) This European Standard was approved by CEN on 1995-01-13. CEN members are bound to comply with the CEN/CENELEC Internal
16、Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. Th
17、is European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are t
18、he national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komite
19、e fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1995 Copyright reserved to CEN members Ref. No. EN ISO 10062:1995 E Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 08:55:21 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 10062:1995 BSI 04-2000 2 Foreword This European
20、Standard has been taken over by the Technical Committee CEN/TC 262, Protection of metallic materials against corrosion, from the work of ISO/TC 107 “Metallic and inorganic coatings” of the International Organization for Standardization (ISO). This European Standard shall be given the status of a nat
21、ional standard, either by publication of an identical text or by endorsement, at the latest by August 1995, and conflicting national standards shall be withdrawn at the latest by August 1995. According to the CEN/CENELEC Internal Regulations, the following countries are bound to implement this Europ
22、ean Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. Contents Page Foreword2 Introduction3 1Scope3 2Normative references3 3Apparatus3 4Test methods4 4.1Test severi
23、ty4 4.2Treatment of the specimens prior to testing4 4.3Examination of the specimens prior to testing4 4.4Filling of the test chamber4 4.5Procedure4 4.6Monitoring of test behaviour5 4.7Post test storage5 5Information to be given in the relevant specification5 6Expression of results5 7Test report5 Ann
24、ex A (normative) Specifications for apparatus for corrosion tests in artificial atmospheres7 Annex B (informative) Bibliography8 Annex ZA (normative) Normative references to international publications with their relevant European publications9 Figure 1 Reference method5 Figure 2 Simplified method5 L
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN ISO 10062 1995
链接地址:https://www.31doc.com/p-3747349.html