《BS-EN-ISO-10320-1999.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-10320-1999.pdf(8页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 10320:1999 Geotextiles and geotextile-related products Identification on site The European Standard EN ISO 10320:1999 has the status of a British Standard ICS 59.080.70 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:31:41 GMT+00:00 2006, Uncontrolled Copy, (c) B
2、SI BS EN ISO 10320:1999 This British Standard, having been prepared under the direction of the Sector Committee for Building and Civil Engineering, was published under the authority of the Standards Committee and comes into effect on 15 May 1999 BSI 03-2000 ISBN 0 580 32474 5 National foreword This
3、British Standard is the English language version of EN ISO 10320:1999. It is identical with ISO 10320:1999. It supersedes BS EN 30320:1993 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee B/553, Geomembranes and geotextiles, which has the responsibilit
4、y to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of o
5、rganizations represented on this committee can be obtained on request to its secretary. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to international publications with their corresponding European publicatio
6、ns. The British Standards which implement these international or European publications may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard
7、does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an i
8、nside front cover, pages i and ii, the EN ISO title page, pages 2 and 3 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No
9、.DateComments Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:31:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 10320:1999 BSI 03-2000i Contents Page National forewordInside front cover Foreword2 Text of EN ISO 103203 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:31:41
10、 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:31:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10320 February 1999 ICS 59.080.70Supersedes EN 30320:1993 Descriptors: Textiles, fi
11、lter fabrics, information, designation, definitions English version Geotextiles and geotextile-related products Identification on site (ISO 10320:1999) Gotextiles et produits apparents Identification sur site (ISO 10320:1999) Geotextilien und geotextilverwandte Produkte Identifikation auf der Bauste
12、lle (ISO 10320:1999) This European Standard was approved by CEN on 5 December 1998. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists an
13、d bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibi
14、lity of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherla
15、nds, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1999 CEN All rights of exploitation in any form and by any means res
16、erved worldwide for CEN national Members. Ref. No. EN ISO 10320:1999 E Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:31:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 10320:1999 BSI 03-2000 2 Foreword The text of EN ISO 10320:1999 has been prepared by Technical Committee CEN/TC 189
17、 “Geotextiles and geotextile-related products”, the secretariat of which is held by IBN, in collaboration with Technical Committee ISO/TC 38 “Textiles”. This European Standard supersedes EN 30320:1993. This European Standard shall be given the status of a national standard, either by publication of
18、an identical text or by endorsement, at the latest by August 1999, and conflicting national standards shall be withdrawn at the latest by August 1999. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Europe
19、an Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Contents Page Foreword2 1Scope3 2Normative references3 3Definitions3 4Identification3 Licen
20、sed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:31:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 10320:1999 BSI 03-20003 1 Scope This European Standard specifies the information accompanying geotextiles and geotextile-related products to enable the user on site to identify the goods as b
21、eing identical to the goods ordered. The positive identification, e.g. of unwrapped or rolled-out geotextiles, is an important aim of this standard. The information specified does not replace that on a technical data sheet, and cannot be used to verify the compliance of the product with the technica
22、l requirements. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendme
23、nts to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 965, Geotextiles and geotextile-related products Determination of mass per unit
24、 area. ISO 10318, Geotextiles Vocabulary. 3 Definitions For the purposes of this European Standard, the following definitions apply: 3.1 supplier the person or organisation from which a geotextile and/or geotextile-related product is purchased or otherwise obtained NOTEA supplier who is not the manu
25、facturer is expected to ensure that the responsibilities of the manufacturer are fully met. 3.2 product name the name given to a particular product or complete range of products NOTEThis is sometimes called the “brand name”. 3.3 product type the descriptive number or the code given to a particular m
26、aterial produced to a particular specification (with tolerances) 3.4 unit identification the information, e.g. number or other code usually given on each unit (e.g. roll) during or after production, which allows the original manufacturer to trace at a later stage the production details, including pl
27、ace and date of production 4 Identification Geotextiles and geotextile-related products shall be supplied with the following information affixed to each unit: a) manufacturer and/or supplier; b) product name; c) product type; d) unit identification; e) nominal gross mass of unit, in kilograms; f) un
28、it dimensions (of material, not of package); roll goods: length width (both in metres) other goods: number of sheets length width (both in metres), or area covered by the product; g) nominal mass per unit area in grams per square metre, determined in accordance with EN 965; h) major polymer type(s)
29、(for each component); i) product classification using terms defined in ISO 10318. In addition, there shall be a means of positively identifying the product at the time of its installation, even if it is no longer in the original packaging. In the case of geotextiles (GTX), the product name and type
30、shall be marked on the product, e.g. by printing along the edge. The marking shall be easily legible and sufficiently durable to permit identification at the time of installation, and shall be repeated at regular intervals of at most 5 m. In the case of geotextile-related products (GTP), the marking
31、 may be as for GTX, or it may for example take the form of tags affixed to the roll edge at intervals of at most 5 m. Examples of other possible systems for GTP are the inclusion of a printed ribbon wound up into the roll, or colour-marking of the edge of the roll. In this latter case, details of th
32、e colour codes used shall be included on the unit label. Where the product is further processed, e.g. cut, so as to render product marking impractical, each unit shall nevertheless have a unique identification. Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:31:41 GMT+00:00 2006, Uncontrol
33、led Copy, (c) BSI BS EN ISO 10320:1999 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Roy
34、al Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an
35、inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensur
36、es that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is
37、 BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters
38、 Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial dis
39、counts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standa
40、rdization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not prec
41、lude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070. Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:31:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI
链接地址:https://www.31doc.com/p-3747380.html