BS-EN-ISO-10360-2-2002.pdf
《BS-EN-ISO-10360-2-2002.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-10360-2-2002.pdf(24页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 10360-2:2002 Geometrical Product Specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 2: CMMs used for measuring size The European Standard EN ISO 10360-2:2001 has the status of a British Standard ICS 17.040.01 NO COPYING WI
2、THOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS EN ISO 10360-2:2002 This British Standard, having been prepared under the direction of the Consumer Products and Services Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committe
3、e on 12 March 2002 BSI 12 March 2002 ISBN 0 580 39090 X National foreword This British Standard is the official English language version of EN ISO 10360-2:2001. It is identical with ISO 10360-2:2001. It supersedes BS EN ISO 10360-2:1996 which is withdrawn. The UK participation in its preparation was
4、 entrusted by Technical Committee TDW/4, Engineering drawing, Metrology, Precision measurement, to Subcommittee TDW/4/-/1, General drawing principles, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references
5、The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue.
6、A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; pre
7、sent to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an
8、 inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii to v, a blank page, pages 1 to 12, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publicat
9、ion Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10360-2 December 2001 ICS 17.040.30Supersedes EN ISO 10360-2:1995 English version Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs u
10、sed for measuring size (ISO 10360-2:2001) Spcification gomtrique des produits (GPS) - Essais de rception et de vrification priodique des machines mesurer tridimensionnelles (MMT) - Partie 2: MMT utilises pour les mesures de tailles (ISO 10360-2:2001) Geometrische Produktspezifikation (GPS) - Annahme
11、prfung und Besttigungsprfung fr Koordinatenmessgerte (KMG) - Teil 2: KMG angewendet fr Lngenmessungen (ISO 10360:2001) This European Standard was approved by CEN on 12 November 2001. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving t
12、his European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (E
13、nglish, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Rep
14、ublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart
15、, 36 B-1050 Brussels 2001 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10360-2:2001 E CORRECTED 2002-02-06 Foreword This document (ISO 10360-2:2001) has been prepared by Technical Committee ISO/TC 213 “Dimensional and geometr
16、ical product specifications and verification“ in collaboration with Technical Committee CEN/TC 290 “Dimensional and geometrical product specification and verification“, the secretariat of which is held by AFNOR. This document supersedes EN ISO 10360-2:1995. This European Standard shall be given the
17、status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2002, and conflicting national standards shall be withdrawn at the latest by June 2002. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the fo
18、llowing countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of the Inte
19、rnational Standard ISO 10360-2:2001 has been approved by CEN as a European Standard without any modifications. NOTE Normative references to International Standards are listed in annex ZA (normative). EN ISO 103602:2001 Reference number ISO 10360-2:2001(E) INTERNATIONAL STANDARD ISO 10360-2 Second ed
20、ition 2001-12-15 Geometrical Product Specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 2: CMMs used for measuring size Spcification gomtrique des produits (GPS) Essais de rception et de vrification priodique des machines mesurer tridimensionnelles
21、(MMT) Partie 2 : MMT utilises pour les mesures de tailles EN ISO 103602:2001 ii EN ISO 103602:2001 ISO 10360-2:2001(E) iii Contents Page Foreword.iv Introduction.v 1 Scope1 2 Normative references1 3 Terms and definitions .2 4 Requirements for metrological characteristics2 5 Acceptance test and rever
22、ification test.3 6 Compliance with specifications.6 7 Applications .7 Annex A (informative) Interim check.9 Annex B (informative) Relation to the GPS matrix model.10 Bibliography11 EN ISO 103602:2001 ISO 10360-2:2001(E) iv Foreword ISO (the International Organization for Standardization) is a worldw
23、ide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on th
24、at committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN ISO 10360 2002
链接地址:https://www.31doc.com/p-3747400.html