BS-EN-ISO-10426-1-2006.pdf
《BS-EN-ISO-10426-1-2006.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-10426-1-2006.pdf(50页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 10426-1:2006 Petroleum and natural gas industries Cements and materials for well cementing Part 1: Specification The European Standard EN ISO 10426-1:2006 has the status of a British Standard ICS 91.100.10; 75.020 ? Licensed Copy: London South Bank University, London South
2、 Bank University, Sun Dec 24 04:44:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 10426-1:2006 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2006 BSI 2006 ISBN 0 580 49614 7 National foreword This British Standard was p
3、ublished by BSI. It is the UK implementation of EN ISO 10426-1:2006. It is identical with ISO 10426-1:2005. It supersedes BS EN ISO 10426-1:2000 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PSE/17, Materials and equipment for petroleum, petrochemic
4、al and natural gas industries. A list of organizations represented on PSE/17 can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard can
5、not confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments Licensed Copy: London South Bank University, London South Bank University, Sun Dec 24 04:44:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 104
6、26-1 October 2006 ICS 91.100.10; 75.020Supersedes EN ISO 10426-1:2000 English Version Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification (ISO 10426-1:2005) Industries du ptrole et du gaz naturel - Ciments et matriaux pour la cimentation des puits
7、- Partie 1: Spcifications (ISO 10426-1:2005) Erdl- und Erdgasindustrie - Zemente und Materialien fr die Zementation von Tieflochbohrungen - Teil 1: Anforderungen (ISO 10426-1:2005) This European Standard was approved by CEN on 6 October 2006. CEN members are bound to comply with the CEN/CENELEC Inte
8、rnal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN membe
9、r. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members
10、are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland an
11、d United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 1
12、0426-1:2006: E Licensed Copy: London South Bank University, London South Bank University, Sun Dec 24 04:44:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Foreword The text of ISO 10426-1:2005 has been prepared by Technical Committee ISO/TC 67 “Materials, equipment and offshore structures for petroleu
13、m and natural gas industries” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 10426- 1:2006 by Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries“, the secretariat of which
14、is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2007, and conflicting national standards shall be withdrawn at the latest by April 2007. This document supersedes EN ISO 104
15、26-1:2000. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
16、 Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 10426-1:2005 has been approved by CEN as EN ISO 10426-1:2006 without any modifications. EN ISO 10426-1:1006 Lic
17、ensed Copy: London South Bank University, London South Bank University, Sun Dec 24 04:44:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Reference number ISO 10426-1:2005(E) INTERNATIONAL STANDARD ISO 10426-1 Second edition 2005-12-15 Petroleum and natural gas industries Cements and materials for well
18、 cementing Part 1: Specification Industries du ptrole et du gaz naturel Ciments et matriaux pour la cimentation des puits Partie 1: Spcifications EN ISO 10426-1:1006 Licensed Copy: London South Bank University, London South Bank University, Sun Dec 24 04:44:15 GMT+00:00 2006, Uncontrolled Copy, (c)
19、BSI ii Licensed Copy: London South Bank University, London South Bank University, Sun Dec 24 04:44:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI iii Contents Page Foreword iv Introduction v 1 Scope . 1 2 Normative references. 1 3 Terms and definitions. 2 4 Requirements 3 4.1 Specification, chemical
20、and physical requirements. 3 4.2 Sampling frequency, timing of tests and equipment 8 5 Sampling procedure. 9 6 Fineness tests. 9 6.1 Procedure 9 6.2 Requirements 9 7 Preparation of slurry for free fluid, compressive strength and thickening time tests 10 7.1 Apparatus 10 7.2 Procedure 11 8 Free-fluid
21、 test (free water) 11 8.1 Apparatus 11 8.2 Calibration . 16 8.3 Procedure 17 8.4 Calculation of percent free fluid 17 8.5 Acceptance requirements 18 9 Compressive strength tests 18 9.1 Apparatus 18 9.2 Procedure 19 9.3 Test procedure (derived from ASTM C109) 20 9.4 Compressive strength acceptance cr
22、iteria 20 10 Thickening-time tests. 21 10.1 Apparatus 21 10.2 Calibration . 27 10.3 Procedure 30 10.4 Thickening time and consistency. 35 10.5 Specification acceptance requirements. 35 11 Marking 35 12 Packing 36 13 Bentonite . 36 Annex A (informative) Calibration procedures for thermocouples, tempe
23、rature-measuring systems and controllers 37 Bibliography. 39 EN ISO 10426-1:1006 Licensed Copy: London South Bank University, London South Bank University, Sun Dec 24 04:44:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI iv Foreword ISO (the International Organization for Standardization) is a worldwi
24、de federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on tha
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN ISO 10426 2006
链接地址:https://www.31doc.com/p-3747402.html