BS-EN-ISO-15609-3-2004.pdf
《BS-EN-ISO-15609-3-2004.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-15609-3-2004.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 15609-3:2004 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 3: Electron beam welding The European Standard EN ISO 15609-3:2004 has the status of a British Standard ICS 25.160.10 ? BS EN ISO 15609-3:2004 Thi
2、s British Standard was published under the authority of the Standards Policy and Strategy Committee on 27 October 2004 BSI 27 October 2004 ISBN 0 580 44250 0 National foreword This British Standard is the official English language version of EN ISO 15609-3:2004. It is identical with ISO 15609-3:2004
3、. It supersedes BS EN ISO 9956-10:1997 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee WEE/36, Approval testing of welding procedures and welders, which has the responsibility to: A list of organizations represented on this committee can be obtained o
4、n request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the
5、 BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enqu
6、irers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This doc
7、ument comprises a front cover, an inside front cover, the EN title page, pages 2 to 10, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No.DateComments EUROPEAN STANDARD N
8、ORME EUROPENNE EUROPISCHE NORM EN ISO 15609-3 August 2004 ICS 25.160.10 Supersedes EN ISO 9956-10:1996 English version Specification and qualification of welding procedures for metallic materials - Welding procedures specification - Part 3: Electron beam welding (ISO 15609-3:2004) Descriptif et qual
9、ification dun mode opratoire de soudage pour les matriaux mtalliques - Descriptif dun mode opratoire de soudage - Partie 3: Soudage par faisceau dlectrons (ISO 15609-3:2004) Anforderung und Qualifizierung von Schweiverfahren fr metallische Werkstoffe - Schweianweisung - Teil 3: Elektronenstrahlschwe
10、ien (ISO 15609-3:2004) This European Standard was approved by CEN on 16 January 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists
11、and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsi
12、bility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
13、 Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 B
14、russels 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 15609-3:2004: E EN ISO 15609-3:2004 (E) 2 Contents page Foreword3 1 Scope 4 2 Normative references4 3 Terms and definitions .4 4 Technical content of welding procedur
15、e specification (WPS)6 4.1 General6 4.2 Welding process6 4.3 Related to the manufacturer.6 4.4 Equipment used.6 4.5 Related to the parent materials6 4.6 Filler or other additional material(s) 7 4.7 Joint design7 4.8 Joint preparation7 4.9 Jigs, fixtures and tooling 7 4.10 Welding position7 4.11 Back
16、 and/or front support.7 4.12 Magnetism7 4.13 Welding technique.7 4.14 Welding parameters 7 4.15 Pre and post weld heating8 4.16 Operations after welding.8 Annex A (informative) Example of a Welding Procedure Specification for electron beam welding (process 51)9 prEN ISO 15609-3:2004 (E) 3 Foreword T
17、his document (EN ISO 15609-3:2004) has been prepared by Technical Committee CEN /TC 121, “Welding“, the secretariat of which is held by DIN, in collaboration with ISO/TC 44 “Welding and allied processes“. This European Standard shall be given the status of a national standard, either by publication
18、of an identical text or by endorsement, at the latest by February 2005, and conflicting national standards shall be withdrawn at the latest by February 2005. This document supersedes EN ISO 9956-10:1996. Annex A is informative. According to the CEN/CENELEC Internal Regulations, the national standard
19、s organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slova
20、kia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN ISO 15609-3:2004 (E) 4 1 Scope This standard specifies requirements for the content of welding procedure specifications for electron beam welding. This standard is part of a series of standards, details of this series are given in EN I
21、SO 15607:2003, annex A. Variables listed in this standard are those influencing the quality and properties of the welded joint. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For
22、undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 4063, Welding and allied processes Nomenclature of processes and reference numbers (ISO 4063:1998). EN ISO 6947, Welds Working positions Definitions of angles of slope and rotation (ISO 6947:
23、1993). EN ISO 15607:2003, Specification and qualification of welding procedures for metallic materials General rules (ISO 15607:2003). 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN ISO 15607:2003 and the following apply. 3.1 slope up contro
24、lled increase of the beam power at the beginning of welding 3.2 slope down controlled decrease of the beam power at the end of welding. The slope down region is the region on the workpiece in which the effects of slope down occur. It can consist of one or two areas, depending on the selected welding
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN ISO 15609 2004
链接地址:https://www.31doc.com/p-3747441.html