BS-ISO-7879-1997.pdf
《BS-ISO-7879-1997.pdf》由会员分享,可在线阅读,更多相关《BS-ISO-7879-1997.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS ISO 7879:1997 Diesel engines Cradle mounted in-line fuel injection pumps Mounting dimensions ICS 43.060.40 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 14:08:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 7879:1997 This British Standard, having been prepared under
2、 the direction of the Engineering Sector Board, was published under the authority of the Standards Board and comes into effect on 15 March 1998 BSI 04-1999 ISBN 0 580 29313 0 National foreword This British Standard reproduces verbatim ISO 7879:1997 and implements it as the UK national standard. The
3、UK participation in its preparation was entrusted to Technical Committee MCE/22, Engines for road vehicles, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change,
4、 and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or Europ
5、ean publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the neces
6、sary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the IS
7、O title page, pages ii to iv, pages 1 to 4 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy:
8、sheffieldun sheffieldun, na, Sun Nov 26 14:08:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 7879:1997 BSI 04-1999i Contents Page National forewordInside front cover Forewordiii Test of ISO 78791 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 14:08:24 GMT+00:00 2006, Uncontrolled Copy,
9、 (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 14:08:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 14:08:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 7879:1997 ii BSI 04-1999 Contents Page Forewordiii 1Scope1 2D
10、imensions and tolerances1 3Other dimensions and specifications2 Annex A (informative) Bibliography4 Figure 1 Cradle-mounted in-line fuel injection pump Type 11 Figure 2 Cradle-mounted in-line fuel injection pump Type 22 Figure 3 Cradle-mounted in-line fuel injection pump Type 33 Licensed Copy: sheff
11、ieldun sheffieldun, na, Sun Nov 26 14:08:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 7879:1997 BSI 04-1999iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Sta
12、ndards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also
13、take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an Internation
14、al Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 7879 was prepared by Technical Committee ISO/TC 22, Road vehicles, Sub-committee SC 7, Injection equipment and filters for use on road vehicles. This third edition cancels and replaces the
15、second edition (ISO 7879:1990), of which it constitutes a minor revision. Annex A of this International Standard is for information only. Descriptors: Road vehicles, motor vehicles, internal combustion engines, diesel engines, injection pumps, form specifications, dimensions, mounting dimensions. Li
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS ISO 7879 1997
链接地址:https://www.31doc.com/p-3747457.html