BS-EN-ISO-12100-2-2003-A1-2009.pdf
《BS-EN-ISO-12100-2-2003-A1-2009.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-12100-2-2003-A1-2009.pdf(46页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 12100-2:2003 +A1:2009 Incorporating Safety of machinery Basic concepts, general principles for design Part 2: Technical principles ICS 01.040.13; 13.110 ? January 2004 corrigendum National foreword This British Standard is the UK implementation of EN ISO 12100-2: 2003+A1:2
2、009. It is identical with ISO 12100-2:2003, incorporating amendment 1:2009. It supersedes BS EN ISO 12100-2:2003 which is withdrawn. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to ISO text carry the number of the ISO amend
3、ment. For example, text altered by ISO amendment 1 is indicated by !“. The UK participation in its preparation was entrusted to Technical Committee MCE/3, Safeguarding of machinery. A list of organizations represented on this committee can be obtained on request to its secretary. This publication do
4、es not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. BS EN ISO 12100-2:2003+A1:2009 Amendments/corrigenda issued since publication Amd. No. Date Comme
5、nts 14975 Corrigendum No. 1 16 January 2004 Incorporating corrected EN foreword and Annex ZA pages and adding Annex ZB page 31 July 2009Implementation of ISO amendment 1:2009 with CEN endorsement A1:2009 This British Standard was published under the authority of the Standards Policy and Strategy Com
6、mittee on 7 November 2003 BSI 2009 ISBN 978 0 580 61714 0 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM June 2009 ICS 01.040.13; 13.110Supersedes EN 292-2:1991 English version Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles (ISO 12100-2:2003) Sc
7、urit des machines - Notions fondamentales, principes gnraux de conception - Partie 2: Principes techniques (ISO 12100-2:2003) Sicherheit von Machinen - Grundbegriffe, allgemeine Gestaltungsleitstze - Teil 2: Technische Leitstze (ISO 12100-2:2003) This European Standard was approved by CEN on 9 June
8、2003. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtaine
9、d on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre
10、 has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and Un
11、ited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2003 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 12100
12、-2:2003 E EN ISO 12100-2:2003+A1 -,-,- 2 CORRECTED 2003-12-17 Foreword This document (EN ISO 12100-2:2003) has been prepared by Technical Committee ISO/TC 199 “Safety of machinery“ in collaboration with Technical Committee CEN/TC 114 “Safety of machinery“, the secretariat of which is held by DIN. Th
13、is European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2004, and conflicting national standards shall be withdrawn at the latest by May 2004. This document supersedes EN 292-2:1991. This document has b
14、een prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZB, which is an integral part of this document. According to the CEN/CENE
15、LEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Sl
16、ovakia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 12100-2:2003 has been approved by CEN as EN ISO 12100-2:2003 without any modifications. BS EN ISO 12100-2:2003+A1:2009 EN ISO 12100-2:2003+A1:2009 Foreword to amendment A1 This document (EN ISO 12100-2:2003
17、/A1:2009) has been prepared by Technical Committee ISO/TC 199 “Safety of machinery“ in collaboration with Technical Committee CEN/TC 114 “Safety of machinery” the secretariat of which is held by DIN. This Amendment to the European Standard EN ISO 12100:2003 shall be given the status of a national st
18、andard, either by publication of an identical text or by endorsement, at the latest by December 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent ri
19、ghts. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directives. For relationshi
20、p with EC Directives, see informative Annexes ZA and ZB, which are integral parts of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Cz
21、ech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 12100-2:
22、2003/Amd 1:2009 has been approved by CEN as a EN ISO 12100-2:2003/A1:2009 without any modification. BS EN ISO 12100-2:2003+A1:2009 EN ISO 12100-2:2003+A1:2009 -,-,- blank -,-,- Contents Page 1 Scope1 2 Normative references .1 3 Terms and definitions.1 4 Inherently safe design measures 1 4.1 General.
23、1 4.2 Consideration of geometrical factors and physical aspects2 4.3 Taking into account the general technical knowledge regarding machine design .3 4.4 Choice of an appropriate technology .3 4.5 Applying the principle of the positive mechanical action of a component on another component.4 4.6 Provi
24、sions for stability .4 4.7 Provisions for maintainability4 4.8 Observing ergonomic principles.5 4.9 Preventing electrical hazard 6 4.10 Preventing hazards from pneumatic and hydraulic equipment.6 4.11 Applying inherently safe design measures to control system.6 4.12 Minimizing the probability of fai
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN ISO 12100 2003 A1 2009
链接地址:https://www.31doc.com/p-3747607.html