BS-EN-60384-25-2006.pdf
《BS-EN-60384-25-2006.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60384-25-2006.pdf(30页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60384-25:2006 Fixed capacitors for use in electronic equipment Part 25: Sectional specification Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte The European Standard EN 60384-25:2006 has the status of a British Standard ICS 31.06
2、0.40; 31.060.50 ? BS EN 60384-25:2006 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 September 2006 BSI 2006 ISBN 0 580 49201 X National foreword This British Standard was published by BSI. It is the UK implementation of EN 60384-25:2006.
3、 It is identical with IEC 60384-25:2006. The UK participation in its preparation was entrusted to Technical Committee EPL/40X, Capacitors and resistors for electronic equipment. A list of organizations represented on EPL/40X can be obtained on request to its secretary. This publication does not purp
4、ort to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARD EN 60384-25 NORME EUROPENNE EURO
5、PISCHE NORM August 2006 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2006 CENELEC - All rights of exploitation in any form an
6、d by any means reserved worldwide for CENELEC members. Ref. No. EN 60384-25:2006 E ICS 31.060.40; 31.060.50 English version Fixed capacitors for use in electronic equipment Part 25: Sectional specification Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyt
7、e (IEC 60384-25:2006) Condensateurs fixes utiliss dans les quipements lectroniques Partie 25: Spcification intermdiaire Condensateurs fixes lectrolytiques en aluminium pour montage en surface lectrolyte solide en polymre conducteur (CEI 60384-25:2006) Festkondensatoren zur Verwendung in Gerten der E
8、lektronik Teil 25: Rahmenspezifikation Oberflchenmontierbare Aluminium-Elektrolyt-Kondensatoren mit leitfhigem Polymerfestkrper- Elektrolyten (IEC 60384-25:2006) This European Standard was approved by CENELEC on 2006-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulation
9、s which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This Eur
10、opean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are
11、 the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden
12、, Switzerland and the United Kingdom. Foreword The text of document 40/1733/FDIS, future edition 1 of IEC 60384-25, prepared by IEC TC 40, Capacitors and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60384-25 on 2006-07-01. The f
13、ollowing dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2007-04-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2009-07-01 Annex ZA has be
14、en added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60384-25:2006 was approved by CENELEC as a European Standard without any modification. _ EN 60384-25:2006 2 3 EN 60384-25:2006 CONTENTS 1 General4 1.1 Scope4 1.2 Object .4 1.3 Normative references 4 1.4 Information
15、to be given in a detail specification 5 1.5 Terms and definitions 6 1.6 Marking.6 2 Preferred rating and characteristics.6 2.1 Preferred characteristics6 2.2 Preferred values of ratings.7 3 Quality assessment procedures 7 3.1 Primary stage of manufacture 7 3.2 Structurally similar components .7 3.3
16、Declaration of conformity (basic requirements)8 3.4 Test schedule and requirement for initial assessment (mandatory and optional tests)8 3.5 Quality conformance inspection .17 4 Test and measurement procedures .19 4.1 Preliminary drying19 4.2 Measuring conditions.19 4.3 Mounting .19 4.4 Visual exami
17、nation and check of dimensions19 4.5 Electrical tests.19 4.6 Resistance to soldering heat21 4.7 Solderability 22 4.8 Shear test .22 4.9 Substrate bending test.22 4.10 Rapid change of temperature.22 4.11 Climatic sequence .23 4.12 Damp heat, steady state 23 4.13 Characteristics at high and low temper
18、ature.24 4.14 Surge 24 4.15 Endurance.24 4.16 Storage at high temperature.25 4.17 Charge and discharge (if required by the detail specification) .25 4.18 Component solvent resistance (if applicable)26 4.19 Solvent resistance of the marking (if applicable).26 4.20 High surge current (if applicable) .
19、26 Annex ZA (normative) Normative references to international publications with their corresponding European publications27 EN 60384-25:2006 4 _ FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 25: Sectional specification Surface mount fixed aluminium electrolytic capacitors with conductive pol
20、ymer solid electrolyte 1 General 1.1 Scope This part of IEC 60384 is applicable to aluminium electrolytic capacitors with conductive polymer solid electrolyte. These capacitors are primarily intended to be mounted direct on substrates for hybrid circuits or to printed boards. Fixed aluminium electro
21、lytic chip capacitors with solid (MnO2) are not included but are covered by IEC 60384-18. 1.2 Object The object of this standard is to prescribe preferred ratings and characteristics and to select from IEC 60384-1:1999, the appropriate quality assessment procedures, tests and measuring methods and t
22、o give general performance requirements for this type of capacitor. Test severities and requirements prescribed in detail specifications referring to this sectional specification shall be of equal or higher performance level; lower performance levels are not permitted. 1.3 Normative references The f
23、ollowing referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60063:1963, Preferred number series for resistors
24、and capacitors Amendment 1 (1967) Amendment 2 (1977) IEC 60068-1: Environmental testing Part 1: General and guidance IEC 60068-2-58:2004, Environmental testing Part 2-58: Tests Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounti
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 60384 25 2006
链接地址:https://www.31doc.com/p-3747716.html