BS-EN-ISO-9311-2-2002.pdf
《BS-EN-ISO-9311-2-2002.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-9311-2-2002.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 9311-2:2002 Adhesives for thermoplastic piping systems Part 2: Determination of shear strength The European Standard EN ISO 9311-2:2002 has the status of a British Standard ICS 83.180 ? Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:11:58 GMT+00:00 2006, Uncontr
2、olled Copy, (c) BSI BS EN ISO 9311-2:2002 This British Standard, having been prepared under the direction of the Materials and Chemicals Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 12 September 2002 BSI 12 September 2002 I
3、SBN 0 580 40356 4 National foreword This British Standard is the official English language version of EN ISO 9311-2:2002. It is identical with ISO 9311-2:2002. The UK participation in its preparation was entrusted to Technical Committee PRI/52, Adhesives, which has the responsibility to: A list of o
4、rganizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Cor
5、respondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does no
6、t of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developme
7、nts and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, pages 2 to 10, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments iss
8、ued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:11:58 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 9311-2 August 2002 ICS 83.180 English version Adhesives for thermoplastic piping systems - P
9、art 2: Determination of shear strength (ISO 9311-2:2002) Adhsifs pour rseaux de tuyauteries en matires thermoplastiques - Partie 2: Dtermination de la rsistance au cisaillement (ISO 9311-2:2002) Klebstoffe fr thermoplastische Rohrleitungssysteme - Teil 2: Bestimmung der Scherfestigkeit (ISO 9311-2:2
10、002) This European Standard was approved by CEN on 6 April 2002. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical r
11、eferences concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member
12、into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Por
13、tugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2002 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN
14、 national Members. Ref. No. EN ISO 9311-2:2002 E Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:11:58 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 9311-2:2002 (E) 2 Contents page Foreword3 Introduction.4 1Scope 5 2Normative references 5 3Terms and definitions5 4Principle5 5Safety 5 6
15、Apparatus .5 7Sampling.5 8Procedure .6 9Expression of results 6 10Test report 7 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:11:58 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 9311-2:2002 (E) 3 Foreword This document (EN ISO 9311-2:2002) has been prepared by Technical Committee CEN
16、/TC 193 “Adhesives“, the secretariat of which is held by AENOR, in collaboration with Technical Committee ISO/TC 61 “Plastics“. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2003, and co
17、nflicting national standards shall be withdrawn at the latest by January 2003. This European Standard is one of a series of standards as listed below : - prEN ISO 9311-1 Adhesives for thermoplastic piping systems - Part 1 : Determination of film properties (ISO/FDIS 9311-1:2001). - prEN ISO 9311-2 A
18、dhesives for thermoplastic piping systems - Part 2 : Determination of shear strength (ISO/FDIS 9311-2:2001). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard : Austria, Belgium, Czech Repu
19、blic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:11:58 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 9311-2:2002
20、 (E) 4 Introduction The aim of this European Standard is to describe a method to characterize adhesives for thermoplastic piping systems by measuring the shear strength of a bonded joint using a test specimen prepared as described. The results obtained with this method should not be extrapolated int
21、o the resistance of a different specimen perhaps the real life article to destructive shear forces. Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:11:58 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 9311-2:2002 (E) 5 1 Scope This part of EN ISO 9311 specifies a method for the determin
22、ation of the shear strength of joints made with adhesives for thermoplastic piping systems. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the
23、 publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (includ
24、ing amendments). EN 923, Adhesives Terms and definitions EN 1066, Adhesives Sampling EN 1067, Adhesives Examination and preparation of samples for testing 3 Terms and definitions For the purposes of this part of EN ISO 9311 the terms and definitions given in EN 923 apply. 4 Principle Obtaining test
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN ISO 9311 2002
链接地址:https://www.31doc.com/p-3747730.html