BS-EN-ISO-17654-2003.pdf
《BS-EN-ISO-17654-2003.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-17654-2003.pdf(10页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 17654:2003 Destructive tests on welds in metallic materials Resistance welding Pressure test on resistance seam welds The European Standard EN ISO 17654:2003 has the status of a British Standard ICS 25.160.40 ? Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 09:20:1
2、5 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 17654:2003 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 20 March 2003 BSI 20 March 2003 ISBN 0 580 41432 9 National foreword This British Standard is the official English language vers
3、ion of EN ISO 17654:2003. It is identical with ISO 17654:2003. The UK participation in its preparation was entrusted to Technical Committee WEE/2, Welding tests, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-
4、references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of Br
5、itish Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; pres
6、ent to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an
7、inside front cover, the EN ISO title page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Sun Nov
8、 19 09:20:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 17654 March 2003 ICS 25.160.40 English version Destructive tests on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds (ISO 17654:2003) Essais destr
9、uctifs des soudures sur matriaux mtalliques - Soudage par rsistance - Essai de pression des soudures par rsistance la molette (ISO 17654:2003) Zerstrende Prfung von Schweiverbindungen an metallischen Werkstoffen - Widerstandsscheweien - Innendruckprfung an Widerstandsrollennahtschweiungen (ISO 17654
10、:2003) This European Standard was approved by CEN on 21 November 2002. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliograph
11、ical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN m
12、ember into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlan
13、ds, Norway, Portugal, Slovak Republic, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2003 CENAll rights of exploitation in any form and by any
14、means reserved worldwide for CEN national Members. Ref. No. EN ISO 17654:2003 E Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 09:20:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 17654:2003 (E) 2 Contents page Foreword3 1Scope 4 2Normative references 4 3Terms and definitions4 4Purpose
15、 of test.4 5Test specimens4 5.1Requirements.4 5.2Dimensions.4 5.3Number of test specimens5 6Test equipment and test procedure.5 7Test report 6 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 09:20:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 17654:2003 (E) 3 Foreword This document (EN
16、 ISO 17654:2003) has been prepared by Technical Committee CEN/TC 121, “Welding“, the secretariat of which is held by DS, in collaboration with ISO/TC 44 “Welding and allied processes“. This European Standard shall be given the status of a national standard, either by publication of an identical text
17、 or by endorsement, at the latest by September 2003, and conflicting national standards shall be withdrawn at the latest by September 2003. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard
18、: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovak Republic, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 09:20:15 GMT+0
19、0:00 2006, Uncontrolled Copy, (c) BSI EN ISO 17654:2003 (E) 4 1Scope This European Standard specifies the pressure test method to be applied to resistance seam welded specimens of different types of material, e.g. uncoated and coated ferritic steels and uncoated austenitic steel sheet with single sh
20、eet thicknesses ranging from 0,3 mm to 3,2 mm. The purpose of this pressure test is to determine the suitability of the material, welding equipment, welding parameters and of other factors on a tank, a vessel or a container for liquids or gases, which are manufactured by resistance seam welding. 2No
21、rmative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions
22、of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). prEN ISO 14329:1999, Welding Destructive testing of welds Failure types and geo
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN ISO 17654 2003
链接地址:https://www.31doc.com/p-3748034.html