BS-EN-ISO-10093-1999.pdf
《BS-EN-ISO-10093-1999.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-10093-1999.pdf(32页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 10093:1999 Plastics Fire tests Standard ignition sources The European Standard EN ISO 10093:1998 has the status of a British Standard ICS 13.220.40; 83.080.01 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 02:18:30 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN I
2、SO 10093:1999 This British Standard, having been prepared under the direction of the Sector Committee for Materials and Chemicals, was published under the authority of the Standards Committee and comes into effect on 15 February 1999 BSI 05-1999 ISBN 0 580 30660 7 National foreword This British Stan
3、dard is the English language version of EN ISO 10093:1998. It is identical with ISO 10093:1998. It supersedes BS ISO 10093:1994 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PRI/26, Burning behaviour of plastics and rubbers, which has the responsibi
4、lity to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list o
5、f organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International
6、Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British S
7、tandard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN ISO title page, page 2, the ISO title page, pages ii to iv, pages 1 to 21 and a back cover. This standard has been updated (see cop
8、yright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 02:18:30 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN IS
9、O 10093:1999 BSI 05-1999i Contents Page National foreword Inside front cover Foreword2 Foreword iii Text of ISO 100931 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 02:18:30 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 02:18:30 G
10、MT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10093 November 1998 ICS 73.220.00; 83.080.10 Descriptors: See ISO document English version Plastics Fire tests Standard ignition sources (ISO 10093:1998) Plastiques Essais au feu Catgories de sources d
11、allumage (ISO 10093:1998) Kunststoffe Brandprfungen Standard-Zndquellen (ISO 10093:1998) This European Standard was approved by CEN on 1 November 1998. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the statu
12、s of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A ve
13、rsion in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, Fr
14、ance, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels
15、1998 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10093:1998 E Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 02:18:30 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 10093:1998 BSI 05-1999 2 Foreword The text of t
16、he International Standard ISO 10093:1998 has been prepared by Technical Committee ISO/TC 61 “Plastics” in collaboration with Technical Committee CEN/TC 249 “Plastics”, the secretariat of which is held by IBN. This European Standard shall be given the status of a national standard, either by publicat
17、ion of an identical text or by endorsement, at the latest by May 1999, and conflicting national standards shall be withdrawn at the latest by May 1999. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Europ
18、ean Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of the International Standard ISO 10093:1998 was approved by C
19、EN as a European Standard without any modification. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 02:18:30 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 02:18:30 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 10093:1998 ii BSI 05-1999 C
20、ontents Page Foreword iii Introduction1 1Scope1 2Normative references1 3Definitions2 4Ignition processes3 5Characteristics of ignition sources3 6Experimental principles3 7Ignition sources4 Annex A (informative) Confirmatory procedure for evaluating test flames18 Annex B (informative) Bibliography21
21、Figure 1 Ignition source P/E16 Figure 2 Ignition source P/E27 Figure 3 Ignition source P/DF17 Figure 4 a) Ignition source S/PF5 Single burner9 Figure 4 b) Ignition source S/PF5 Double-burner arrangement10 Figure 5 Ignition source S/DF611 Figure 6 Ignition source P/PF112 Figure 7 Ignition source P/PF
22、214 Figure 8 Ignition source S/PF415 Figure 9 Ignition source S/R116 Figure 10 Ignition source S/R2 (gas-fuelled radiant panel)17 Figure A.1 Copper block for 500 W and 1 kW flame calibration19 Figure A.2 Copper block for source P/PF2, 05 W flame, calibration19 Figure A.3 Confirmatory-test arrangemen
23、t20 Table 1 Classification of ignition sources4 Table 2 50 W, 20 mm high flame13 Table 3 500 W, 125 mm high flame with 40 mm inner blue cone13 Table 4 Details of ignition sources based on conical radiators17 Descriptors: Plastics, tests, fire tests, test equipment, ignition, ignition sources (fire).
24、 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 02:18:30 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 10093:1998 BSI 05-1999iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of prepa
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN ISO 10093 1999
链接地址:https://www.31doc.com/p-3748058.html