BS-EN-ISO-283-2007.pdf
《BS-EN-ISO-283-2007.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-283-2007.pdf(20页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 283:2007 Textile conveyor belts Full thickness tensile strength, elongation at break and elongation at the reference load Test method The European Standard EN ISO 283:2007 has the status of a British Standard ICS 53.040.20 ? Licensed Copy: London South Bank University, Lon
2、don South Bank University, Mon Jul 16 04:16:43 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS EN ISO 283:2007 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2007 BSI 2007 ISBN 978 0 580 53766 0 National foreword This British Standard
3、was published by BSI. It is the UK implementation of EN ISO 283:2007. It supersedes BS EN ISO 283-1:2000 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PRI/67, Conveyor belts. A list of organizations represented on this committee can be obtained on r
4、equest to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComm
5、ents Licensed Copy: London South Bank University, London South Bank University, Mon Jul 16 04:16:43 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 283 June 2007 ICS 53.040.20Supersedes EN ISO 283-1:2000 English Version Textile conveyor belts - Ful
6、l thickness tensile strength, elongation at break and elongation at the reference load - Test method (ISO 283:2007) Courroies transporteuses carcasse textile - Rsistance la traction, allongement la rupture et allongement sous force de rfrence en pleine paisseur - Mthode dessai (ISO 283:2007) Textilf
7、rdergurte - Zugfestigkeit bei voller Gurtdicke, Bruchdehnung und Dehnung bei breitenbezogener Bruchkraft - Prfverfahren (ISO 283:2007) This European Standard was approved by CEN on 23 May 2007. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions f
8、or giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three offic
9、ial versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria,
10、 Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTE
11、E FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 283:2007: E Licensed Copy: London So
12、uth Bank University, London South Bank University, Mon Jul 16 04:16:43 GMT+00:00 2007, Uncontrolled Copy, (c) BSI Foreword This document (EN ISO 283:2007) has been prepared by Technical Committee ISO/TC 41 “Pulleys and belts (including veebelts)“ in collaboration with Technical Committee CEN/TC 188
13、“Conveyor belts“, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2007, and conflicting national standards shall be withdrawn at the latest by Dec
14、ember 2007. This document supersedes EN ISO 283-1:2000. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, Fra
15、nce, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 283:2007 has been approved by CEN as EN ISO 283:2007 wit
16、hout any modifications. EN ISO 283:2007 Licensed Copy: London South Bank University, London South Bank University, Mon Jul 16 04:16:43 GMT+00:00 2007, Uncontrolled Copy, (c) BSI Reference number ISO 283:2007(E) INTERNATIONAL STANDARD ISO 283 Third edition 2007-06-15 Textile conveyor belts Full thick
17、ness tensile strength, elongation at break and elongation at the reference load Test method Courroies transporteuses carcasse textile Rsistance la traction, allongement la rupture et allongement sous force de rfrence en pleine paisseur Mthode dessai EN ISO 283:2007 Licensed Copy: London South Bank U
18、niversity, London South Bank University, Mon Jul 16 04:16:43 GMT+00:00 2007, Uncontrolled Copy, (c) BSI ii Licensed Copy: London South Bank University, London South Bank University, Mon Jul 16 04:16:43 GMT+00:00 2007, Uncontrolled Copy, (c) BSI iii Contents Page Foreword iv 1 Scope . 1 2 Normative r
19、eferences. 1 3 Terms and definitions. 1 4 Principle. 2 5 Apparatus 2 6 Test pieces 3 6.1 Shape and dimensions. 3 6.2 Method of selection of test pieces 3 6.3 Preparation of test pieces 7 6.4 Number of test pieces 8 6.5 Conditioning of test pieces 8 7 Procedure 8 8 Calculation and expression of resul
20、ts 8 8.1 Tensile strength 8 8.2 Elongation . 8 9 Test report . 9 Bibliography. 10 EN ISO 283:2007 Licensed Copy: London South Bank University, London South Bank University, Mon Jul 16 04:16:43 GMT+00:00 2007, Uncontrolled Copy, (c) BSI iv Foreword ISO (the International Organization for Standardizat
21、ion) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be r
22、epresented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards
23、 are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an Internat
24、ional Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 283 was pr
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN ISO 283 2007
链接地址:https://www.31doc.com/p-3748090.html