BS-SP-172-1999 ISO-9418-1998.pdf
《BS-SP-172-1999 ISO-9418-1998.pdf》由会员分享,可在线阅读,更多相关《BS-SP-172-1999 ISO-9418-1998.pdf(18页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD AEROSPACE SERIES BS SP 172:1999 ISO 9418:1998 Aerospace Rivets, solid, in aluminium or aluminium alloys Procurement specification ICS 49.080.60 Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:36:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI B
2、S SP 172:1999 This British Standard, having been prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 February 1999 BSI 05-1999 ISBN 0 580 30942 8 National foreword This British Standard reproduces
3、verbatim ISO 9418:1998 and implements it as the UK national standard. The UK participation in its preparation was entrusted by Technical Committee ACE/12, Aerospace fasteners and fastening systems, to Subcommittee ACE/12/1, Aerospace fasteners and fastening systems (International), which has the res
4、ponsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A
5、 list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “Inte
6、rnational Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a
7、 British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the ISO title page, pages ii to iv, pages 1 to 9 and a back cover. This standard has been updated (see copyright date) and may h
8、ave had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:36:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI
9、 BS SP 172:1999 BSI 05-1999i Contents Page National foreword Inside front cover Foreword iii Text of ISO 94181 Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:36:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: London South Bank Universit
10、y, London South Bank University, Sat Dec 09 03:36:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:36:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS SP 172:1999 ii BSI 05-1999 Contents Page Forewordiii 1 Scope1 2
11、 Normative references1 3 Terms and definitions1 4 Quality assurance2 4.1 General2 4.1.1 Approval of manufacturers2 4.1.2 Acceptance of solid rivets2 4.2 Acceptance inspection and test conditions2 4.3 Use of “Statistical process control (SPC)”2 5 Requirements and test methods3 6 Records and test repo
12、rts9 7 Certificate of compliance9 Figure 18 Figure 29 Figure 39 Table 1 Technical requirements and test methods3 Table 2 Classification of defects6 Table 3 Double shear strength6 Table 4 Sampling plans for the inspection of double shear strength7 Table 5 Sampling plans for visual inspection and dime
13、nsional characteristics7 Table 6 Sampling plans for the inspection of mechanical and metallurgical characteristics8 Descriptors: Aircraft industry, fasteners, aluminium products, rivets, specifications, procurement specifications, shear strength, tests, acceptance testing, sampling tables, quality a
14、ssurance. Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:36:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS SP 172:1999 BSI 05-1999iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (
15、ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, go
16、vernmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IE
17、C Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 9418 was prepared by Tec
18、hnical Committee ISO/TC 20, Aircraft and space vehicles, Subcommittee SC 4, Aerospace fastener systems. Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:36:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI iv blank Licensed Copy: London South Bank University, Lond
19、on South Bank University, Sat Dec 09 03:36:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS SP 172:1999 BSI 05-19991 1 Scope This International Standard specifies the characteristics and quality assurance requirements for solid rivets made in aluminium or aluminium alloy for aerospace construction.
20、It is applicable whenever it is referenced in a definition document. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions o
21、f, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative do
22、cument referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 2859-1:1989, Sampling procedures for inspection by attributes Part 1: Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection. ISO 7870:1993, Control chart
23、s General guide and introduction. ISO 7966:1993, Acceptance control charts. ISO 8258:1991, Shewhart control charts. ISO 9002:1994, Quality systems Model for quality assurance in production, installation and servicing. ISO/TR 13425:1995, Guide for the selection of statistical methods in standardizati
24、on and specification. ASTM E112:1996, Standard Test Methods for Determining Average Grain Size1). 3 Terms and definitions For the purposes of this International Standard, the following terms and definitions apply. 3.1 batch quantity of finished rivets, manufactured using the same process, from a sin
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-SP-172-1999 ISO-9418-1998 BS SP 172 1999 ISO 9418 1998
链接地址:https://www.31doc.com/p-3748180.html