BS-ISO-16004-2005.pdf
《BS-ISO-16004-2005.pdf》由会员分享,可在线阅读,更多相关《BS-ISO-16004-2005.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS ISO 16004:2005 Aircraft ground equipment Passenger boarding bridge or transfer vehicle Requirements for interface with aircraft doors ICS 49.100 ? Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 14:39:05 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 16004:2005 This Bri
2、tish Standard was published under the authority of the Standards Policy and Strategy Committee on 24 February 2006 BSI 24 February 2006 ISBN 0 580 47865 3 National foreword This British Standard reproduces verbatim ISO 16004:2005 and implements it as the UK national standard. The UK participation in
3、 its preparation was entrusted to Technical Committee ACE/57, Air cargo and ground support equipment, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement internation
4、al publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all
5、 the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on
6、 the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii to iv, pages 1 to 6, an ins
7、ide back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 14:39:05 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Refer
8、ence number ISO 16004:2005(E) INTERNATIONAL STANDARD ISO 16004 First edition 2005-04-15 Aircraft ground equipment Passenger boarding bridge or transfer vehicle Requirements for interface with aircraft doors Matriel au sol pour aronefs Passerelle passagers ou autobus lvateur Exigences dinterface avec
9、 les portes daronefs BS ISO 16004:2005 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 14:39:05 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 14:39:05 GMT+00:00 2006, Uncontrolled Copy, (c) BSI iii Foreword ISO (the International Organiza
10、tion for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established
11、has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. In
12、ternational Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publi
13、cation as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent r
14、ights. ISO 16004 was prepared by Technical Committee ISO/TC 20, Aircraft and space vehicles, Subcommittee SC 9, Air cargo and ground equipment. BS ISO 16004:2005 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 14:39:05 GMT+00:00 2006, Uncontrolled Copy, (c) BSI iv Introduction Many aircraft t
15、ypes include, in the vicinity of the main deck doors used for passenger access, a variety of protruding items such as pitots, probes, sensors, strakes, etc. which are exposed to inadvertent damage and have been known to suffer from inappropriate design and/or positioning of passenger boarding bridge
16、s or passenger transfer vehicles. Since perfect condition of these items is generally essential to flight safety, it is the intent of this International Standard to specify minimum interface requirements on passenger boarding bridges or passenger transfer vehicles such that systematic or inadvertent
17、 contact with one of them is avoided. This International Standard accordingly specifies the minimum interface requirements to be met by the aircraft mating section of either a passenger boarding bridge or a passenger transfer vehicle, in order to allow compatibility with aircraft passenger doors and
18、 their surroundings without interference with or risk of damage to these protruding items. Throughout this International Standard, the minimum essential criteria are identified by the use of the key- word “shall”. Recommended criteria are identified by the use of the key-word “should” and, while not
19、 mandatory, are considered to be of primary importance in providing safe passenger boarding bridge or passenger transfer vehicles and minimizing the risk of inadvertent damage to vital aircraft parts. Deviation from recommended criteria should only occur if positively required by basic passenger boa
20、rding bridge or passenger transfer vehicle design factors with a significant cost impact, and after careful consideration, extensive testing, and thorough service evaluation have shown alternative methods to be satisfactory. BS ISO 16004:2005 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 14
21、:39:05 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 1 Aircraft ground equipment Passenger boarding bridge or transfer vehicle Requirements for interface with aircraft doors WARNING Compliance of a passenger boarding bridge or passenger transfer vehicle with the provisions of this International Standar
22、d will only ensure protection of the exposed devices on the indicated existing aircraft types. As to other potential circumstances, where a passenger boarding bridge or passenger transfer vehicle is to be operated on another existing aircraft type, the responsible design or operating body should che
23、ck the nature and location of any items protruding in the vicinity of the passenger door(s) used, in order to check if the aircraft is protected against interference or if particular positioning precautions are required; where features specific to one aircraft type or sub-type have been identified,
24、passenger boarding bridge design might not take them into account where bridge and/or aircraft stand characteristics preclude handling of the particular aircraft type concerned. Passenger transfer vehicles shall take them into account, inasmuch as the vehicle is capable of reaching the aircraft type
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS ISO 16004 2005
链接地址:https://www.31doc.com/p-3748221.html