BS-ISO-17615-2007.pdf
《BS-ISO-17615-2007.pdf》由会员分享,可在线阅读,更多相关《BS-ISO-17615-2007.pdf(20页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS ISO 17615:2007 Incorporating corrigendum March 2008 Aluminium and aluminium alloys Alloyed ingots for remelting Specifications ICS 77.120.10 ? Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for
2、Resale, 08/14/2008 22:20:23 MDTNo reproduction or networking permitted without license from IHS -,-,- BS ISO 17615:2007 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2007 BSI 2008 ISBN 978 0 580 62554 1 National foreword This Brit
3、ish Standard is the UK implementation of ISO 17615:2007, incorporating corrigendum March 2008. The UK participation in its preparation was entrusted to Technical Committee NFE/35, Light metals and their alloys. A list of organizations represented on this committee can be obtained on request to its s
4、ecretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments/corrigenda issued since publication DateComments 31 July
5、2008Implementation of ISO corrigendum, March 2008. Entry for alloy type Al ZnSiMg modified in Table 1 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 22:20:23 MDTNo reproduction or networking
6、permitted without license from IHS -,-,- Reference number ISO 17615:2007(E) INTERNATIONAL STANDARD ISO 17615 First edition 2007-07-15 Aluminium and aluminium alloys Alloyed ingots for remelting Specifications Aluminium et alliages daluminium Lingots pour refusion en aluminium alli Spcifications BS I
7、SO 17615:2007 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 22:20:23 MDTNo reproduction or networking permitted without license from IHS -,-,- ii Copyright British Standards Institution Prov
8、ided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 22:20:23 MDTNo reproduction or networking permitted without license from IHS -,-,- iii Contents Page Foreword iv 1 Scope . 1 2 Terms and definitions. 1 3 Ordering information 2 4 Requireme
9、nts 2 4.1 Production and manufacturing processes 2 4.2 Quality control. 2 4.3 Chemical composition 2 4.4 Quality 3 4.5 Form of products 3 5 Product inspection and test methods 3 5.1 Analysis of chemical composition 3 5.2 Chemical composition limits. 4 6 Inspection documents 4 7 Marking of products .
10、 4 8 Packaging 4 9 Delivery documents 4 10 Complaints 5 Annex A (normative) Rules for expressing the designation and chemical composition of alloyed ingots for remelting 9 Annex B (informative) Comparison between cast aluminium alloy designations. 11 Bibliography. 12 BS ISO 17615:2007 Copyright Brit
11、ish Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 22:20:23 MDTNo reproduction or networking permitted without license from IHS -,-,- iv Foreword ISO (the International Organization for Standardization) is a w
12、orldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented
13、on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafte
14、d in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Stand
15、ard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 17615 was prepared by
16、 Technical Committee ISO/TC 79, Light metals and their alloys, Subcommittee SC 7, Aluminium and cast aluminium alloys. BS ISO 17615:2007 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 22:20:2
17、3 MDTNo reproduction or networking permitted without license from IHS -,-,- 1 Aluminium and aluminium alloys Alloyed ingots for remelting Specifications 1 Scope This International Standard defines the requirements for grades of alloyed aluminium ingots intended for remelting. It specifies the classi
18、fications and designations applicable to these grades, the conditions in which they are produced, their properties and the required identification marking. This International Standard does not address the issue of radioactivity. Certain elements, such as Pb, Hg, Cr6 and Cd, may be subject to restric
19、tions. 2 Terms and definitions For the purposes of this document, the following terms and definitions apply. 2.1 alloying element metallic or non-metallic element whose content lies within specific upper and lower limits for the purpose of giving the resulting alloy specific properties 2.2 impurity
20、metallic or non-metallic element present but which is not intentionally added to a base metal and for which no lower limit is specified 2.3 casting alloy alloy primarily intended for the production of castings 2.4 ingot for remelting metal cast into a form suitable for remelting, which has been proc
21、essed, as appropriate, to adjust the chemical composition and to control certain metallic or non-metallic impurities 2.5 casting general term for products at or near finished shape, formed by solidification of a metal or alloy in a mould 2.6 melt quantity of liquid metal that has simultaneously unde
22、rgone the same preparatory treatment in the furnace before the casting operation BS ISO 17615:2007 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 22:20:23 MDTNo reproduction or networking per
23、mitted without license from IHS -,-,- 2 2.7 bundle collection of ingots taken from one or more batches and secured, for example by banding, for the purposes of handling, shipment and storage 2.8 heat cast quantity of products cast simultaneously from the same melt NOTE 1 This term is not used for ca
24、sting. NOTE 2 The different ingots of a cast can have different dimensions. 3 Ordering information The purchase order shall define the product required and shall contain the following information: a) designation of the aluminium alloy according to this International Standard (or the purchaser code a
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS ISO 17615 2007
链接地址:https://www.31doc.com/p-3748260.html