BS-EN-61300-2-42-2005.pdf
《BS-EN-61300-2-42-2005.pdf》由会员分享,可在线阅读,更多相关《BS-EN-61300-2-42-2005.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 61300-2-42:2005 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-42: Tests Static side load for connectors The European Standard EN 61300-2-42:2005 has the status of a British Standard ICS 33.180.20 ? Licensed Copy: sheffi
2、eldun sheffieldun, na, Mon Nov 13 04:20:02 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 61300-2-42:2005 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 23 January 2006 BSI 23 January 2006 ISBN 0 580 47716 9 National foreword This British
3、Standard is the official English language version of EN 61300-2-42:2005. It is identical with IEC 61300-2-42:2005. It supersedes BS EN 61300-2-42:1999 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibr
4、e optic interconnecting devices and passive components, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in
5、this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a
6、contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposa
7、ls for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 9 and a back cover. The BSI copyright notice displayed in
8、 this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 04:20:02 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD EN 61300-2-42 NORME EUROPENNE EUROPISCHE NORM September 2
9、005 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2005 CENELEC - All rights of exploitation in any form and by any means reser
10、ved worldwide for CENELEC members. Ref. No. EN 61300-2-42:2005 E ICS 33.180.20 Supersedes EN 61300-2-42:1998 English version Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-42: Tests Static side load for connectors (IEC 61300-2-42:2005) Disposi
11、tifs dinterconnexion et composants passifs fibres optiques - Mthodes fondamentales dessais et de mesures Partie 2-42: Essais Charge latrale statique pour connecteurs (CEI 61300-2-42:2005) Lichtwellenleiter-Verbindungselemente und passive Bauteile Grundlegende Prf- und Messverfahren Teil 2-42: Prfung
12、en Statische seitliche Zugbelastung fr Steckverbinder (IEC 61300-2-42:2005) This European Standard was approved by CENELEC on 2005-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a nat
13、ional standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version
14、in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic,
15、 Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 04:20:02 GMT+0
16、0:00 2006, Uncontrolled Copy, (c) BSI Foreword The text of document 86B/2137/FDIS, future edition 2 of IEC 61300-2-42, prepared by SC 86B, Fibre optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELE
17、C as EN 61300-2-42 on 2005-08-01. This European Standard supersedes EN 61300-2-42:1998. The significant changes include application of the new format for EN 61300 series documents and modification of the recommended duration for load. The following dates were fixed: latest date by which the EN has t
18、o be implemented at national level by publication of an identical national standard or by endorsement (dop) 2006-05-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2008-08-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the In
19、ternational Standard IEC 61300-2-42:2005 was approved by CENELEC as a European Standard without any modification. _ EN 61300-2-42:2005 2 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 04:20:02 GMT+00:00 2006, Uncontrolled Copy, (c) BSI CONTENTS 1 Scope 4 2 Normative references .4 3 General d
20、escription 4 4 Apparatus 5 4.1 Load generator5 4.2 Holding fixture.5 4.3 Optical source and detector.5 5 Procedure 5 5.1 Preparation of specimens 5 5.2 Pre-conditioning 5 5.3 Initial measurements .5 5.4 Conditioning5 5.5 Measure the attenuation 6 5.6 Apply cable load6 5.7 Monitor attenuation7 5.8 Re
21、covery.7 5.9 Final measurements and examinations 7 5.10 Repeated testing .7 6 Severity7 7 Details to be specified 7 Figure 1 Example of the static side load test arrangement6 Table 1 Recommended load and durations for varying cable diameters 6 EN 61300-2-42:2005 3 Annex ZA (normative) Normative refe
22、rences to international publications with their corresponding European publications.9 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 04:20:02 GMT+00:00 2006, Uncontrolled Copy, (c) BSI FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS BASIC TEST AND MEASUREMENT PROCEDURES Part 2-42:
23、 Tests Static side load for connectors 1 Scope This part of IEC 61300 specifies a test to determine the influence of a side load applied to a connector plug. The intention is to simulate the load, due to a length of fibre cable, which would typically be experienced during service. Static side load i
24、s also referred to as side pull. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) ap
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 61300 42 2005
链接地址:https://www.31doc.com/p-3748388.html