BS-ISO-13765-6-2004.pdf
《BS-ISO-13765-6-2004.pdf》由会员分享,可在线阅读,更多相关《BS-ISO-13765-6-2004.pdf(10页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS ISO 13765-6:2004 Refractory mortars Part 6: Determination of moisture content of ready-mixed mortars ICS 81.080 ? Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 07:26:57 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 13765-6:2004 This British Standard was published und
2、er the authority of the Standards Policy and Strategy Committee on 1 February 2006 BSI 1 February 2006 ISBN 0 580 47707 X National foreword implements it as the UK national standard. Together with BS ISO 13765-1, BS ISO 13765-2, BS ISO 13765-3, BS ISO 13765-4 and BS ISO 13765-5, it supersedes BS 190
3、2-11:1991 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee RPI/1, Refractories, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or p
4、roposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement intern
5、ational publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to includ
6、e all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii a
7、nd iii, a blank page, pages 1 and 2, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments This British Standard reproduces verbatim ISO 13765-6:2004 and Licens
8、ed Copy: sheffieldun sheffieldun, na, Mon Nov 27 07:26:57 GMT+00:00 2006, Uncontrolled Copy, (c) BSI INTERNATIONAL STANDARD ISO 13765-6 First edition 2004-06-01 Reference number ISO 13765-6:2004(E) Refractory mortars Part 6: Determination of moisture content of ready-mixed mortars Mortiers rfractair
9、es Partie 6: Dtermination de lhumidit des mortiers prts lemploi BS ISO 13765-6:2004 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 07:26:57 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 07:26:57 GMT+00:00 2006, Uncontrolled Copy, (c) BSI
10、 BS ISO 13765-6:2004 iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested i
11、n a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commis
12、sion (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical
13、 committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall
14、 not be held responsible for identifying any or all such patent rights. ISO 13765-6 was prepared by Technical Committee ISO/TC 33, Refractories. ISO 13765 consists of the following parts, under the general title Refractory mortars: Part 1: Determination of consistency using the penetrating cone meth
15、od Part 2: Determination of consistency using the reciprocating flow table method Part 3: Determination of joint stability Part 4: Determination of flexural bonding strength Part 5: Determination of grain size distribution (sieve analysis) Part 6: Determination of moisture content of ready-mixed mor
16、tars Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 07:26:57 GMT+00:00 2006, Uncontrolled Copy, (c) BSI . blank Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 07:26:57 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 2004 All rights reserved 1 Refractory mortars Part 6: Determination o
17、f moisture content of ready-mixed mortars 1Scope This part of ISO 13765 describes a method for determining the moisture content of ready-mixed refractory mortars. 2Normative references The following referenced documents are indispensable for the application of this document. For dated references, on
18、ly the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 8656-1, Refractory products Sampling of raw materials and unshaped products Part 1: Sampling scheme 3Terms and definitions For the purposes of this document, th
19、e following terms and definitions apply. 3.1 moisture content loss in mass of a sample dried at , expressed as a percentage of the original mass of the sample 4Principle A sample of known mass is dried to constant mass in an oven at . 5Apparatus 5.1Balance, capable of weighing to the nearest . 5.2El
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS ISO 13765 2004
链接地址:https://www.31doc.com/p-3748392.html