BS-ISO-1998-2-1998.pdf
《BS-ISO-1998-2-1998.pdf》由会员分享,可在线阅读,更多相关《BS-ISO-1998-2-1998.pdf(32页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS ISO 1998-2:1998 Petroleum industry Terminology Part 2: Properties and tests ICS 01.040.75; 75.080 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 25 13:46:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 1998-2:1998 This British Standard, having been prepared under the di
2、rection of the Sector Committee for Materials and Chemicals, was published under the authority of the Standards Committee and comes into effect on 15 January 1999 BSI 05-1999 ISBN 0 580 30883 9 National foreword This British Standard reproduces verbatim ISO 1998-2:1998 and implements it as the UK na
3、tional standard. The UK participation in its preparation was entrusted to Technical Committee PTI/13, Petroleum testing and terminology, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretat
4、ion, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which imp
5、lement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not pur
6、port to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front
7、cover, pages i and ii, the ISO title page, pages ii to iv, pages 1 to 22 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. N
8、o.DateComments Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 25 13:46:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 1998-2:1998 BSI 05-1999i Contents Page National forewordInside front cover Forewordii 1 Scope1 2 Normative reference1 3 Term numbering2 4 Index2 5Order of listing2 Annex A
9、 (informative) Bibliography22 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 25 13:46:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 25 13:46:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Licensed Copy: sheffieldun sheffieldun, na, Sat
10、 Nov 25 13:46:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 1998-2:1998 ii BSI 05-1999 Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carrie
11、d out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. IS
12、O collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires appr
13、oval by at least 75 % of the member bodies casting a vote. International Standard ISO 1998-2 was prepared by Technical Committee ISO/TC 28, Petroleum products and lubricants, Subcommittee SC 1, Terminology. This second edition, together with the other seven parts of ISO 1998, cancels and replaces al
14、l of the first edition, which was composed of two parts (ISO 1998-1:1974 and ISO 1998-2:1976). This new edition constitutes a full recast of the standard, with a new classification system for all terms of the two parts of the first edition, which are now distributed in all parts of the new edition,
15、and the addition of many new terms. ISO 1998 consists of the following parts, under the general title Petroleum industry Terminology: Part 1: Raw materials and products; Part 2: Properties and tests; Part 3: Exploration and production; Part 4: Refining; Part 5: Transport, storage, distribution; Part
16、 6: Measurement; Part 7: Miscellaneous terms; Part 99: General and index. Annex A of this part of ISO 1998 is for information only. Descriptors: Petroleum industry, petroleum products, properties, tests, vocabulary. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 25 13:46:16 GMT+00:00 2006, Unco
17、ntrolled Copy, (c) BSI BS ISO 1998-2:1998 BSI 05-1999iii Avant-propos LISO (Organisation internationale de normalisation) est une fdration mondiale dorganismes nationaux de normalisation (comits membres de lISO). Llaboration des Normes internationales est en gnral confie aux comits techniques de lIS
18、O. Chaque comit membre intress par une tude a le droit de faire partie du comit technique cr cet effet. Les organisations internationales, gouvernementales et non gouvernementales, en liaison avec lISO participent galement aux travaux. LISO collabore troitement avec la Commission lectrotechnique int
19、ernationale (CEI) en ce qui concerne la normalisation lectrotechnique. Les projets de Normes internationales adopts par les comits techniques sont soumis aux comits membres pour vote. Leur publication comme Normes internationales requiert lapprobation de 75 % au moins des comits membres votants. La
20、Norme internationale ISO 1998-2 a t labore par le comit technique ISO/TC 28, Produits ptroliers et lubrifiants, sous-comit SC 1, Terminologie. Cette deuxime dition, conjointement avec les sept autres parties de lISO 1998, annule et remplace la totalit de la premire dition qui comprenait deux parties
21、 (ISO 1998-1:1974 et ISO 1998-2:1976). Cette nouvelle dition constitue une refonte complte de la norme, avec un nouveau systme de classification des termes des deux parties de la premire dition, qui se trouvent maintenant rpartis sur lensemble des parties de la nouvelle dition, et lajout de nombreux
22、 nouveaux termes. LISO 1998 comprend les parties suivantes, prsentes sous le titre gnral Industrie ptrolire Terminologie: Partie 1: Matires premires et produits; Partie 2: Proprits et essais; Partie 3: Exploration et production; Partie 4: Raffinage; Partie 5: Transport, stockage, distribution; Parti
23、e 6: Mesurage; Partie 7: Termes divers; Partie 99: Gnralits et index; Lannexe A de la prsente partie de lISO 1998 est donne uniquement titre dinformation. Descripteurs: Industrie du ptrole, produit ptrolier, proprit, essai, vocabulaire. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 25 13:46:16
24、 GMT+00:00 2006, Uncontrolled Copy, (c) BSI iv blank Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 25 13:46:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 1998-2:1998 BSI 05-19991 1 Scope1 Domaine dapplication This part of ISO 1998 consists of a list of equivalent English and French term
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS ISO 1998
链接地址:https://www.31doc.com/p-3748519.html