BS-EN-ISO-11611-2007.pdf
《BS-EN-ISO-11611-2007.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-11611-2007.pdf(26页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 11611:2007 Protective clothing for use in welding and allied processes ICS 13.340.10; 25.160.01 ? Licensed Copy: London South Bank University, London South Bank University, Fri Feb 15 06:36:30 GMT+00:00 2008, Uncontrolled Copy, (c) BSI BS EN ISO 11611:2007 This British Sta
2、ndard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2008 BSI 2008 ISBN 978 0 580 53202 3 National foreword This British Standard is the UK implementation of EN ISO 11611:2007. It supersedes BS EN 470-1:1995 which is withdrawn. The UK participation in
3、its preparation was entrusted by Technical Committee PH/3, Protective clothing, to Subcommittee PH/3/2, Clothing for protection against heat and flame. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all
4、the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments/corrigenda issued since publication DateComments Licensed Copy: London South Bank University, London South Bank Univ
5、ersity, Fri Feb 15 06:36:30 GMT+00:00 2008, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11611 October 2007 ICS 25.160.01; 13.340.10Supersedes EN 470-1:1995 English Version Protective clothing for use in welding and allied processes (ISO 11611:2007) Vtements de
6、 protection utiliss pendant le soudage et les techniques connexes (ISO 11611:2007) Schutzkleidung fr Schweien und verwandte Verfahren (ISO 11611:2007) This European Standard was approved by CEN on 20 July 2007. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate
7、 the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exis
8、ts in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards b
9、odies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
10、EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11611:2007: E Licen
11、sed Copy: London South Bank University, London South Bank University, Fri Feb 15 06:36:30 GMT+00:00 2008, Uncontrolled Copy, (c) BSI Foreword This document (EN ISO 11611:2007) has been prepared by Technical Committee CEN/TC 162 “Protective clothing including hand and arm protection and lifejackets“,
12、 the secretariat of which is held by DIN, in collaboration with Technical Committee ISO/TC 94 “Personal safety - Protective clothing and equipment“. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by
13、 April 2008, and conflicting national standards shall be withdrawn at the latest by April 2008. This document supersedes EN 470-1:1995. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements
14、 of EC Directive(s). For relationship with EC Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria,
15、 Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement n
16、otice The text of ISO 11611:2007 has been approved by CEN as a EN ISO 11611:2007 without any modification. BS EN ISO 11611:2007 Licensed Copy: London South Bank University, London South Bank University, Fri Feb 15 06:36:30 GMT+00:00 2008, Uncontrolled Copy, (c) BSI Reference number ISO 11611:2007(E)
17、 INTERNATIONAL STANDARD ISO 11611 First edition 2007-10-15 Protective clothing for use in welding and allied processes Vtements de protection utiliss pendant le soudage et les techniques connexes BS EN ISO 11611:2007 Licensed Copy: London South Bank University, London South Bank University, Fri Feb
18、15 06:36:30 GMT+00:00 2008, Uncontrolled Copy, (c) BSI ii Licensed Copy: London South Bank University, London South Bank University, Fri Feb 15 06:36:30 GMT+00:00 2008, Uncontrolled Copy, (c) BSI iii Contents Page Foreword iv 1 Scope . 1 2 Normative references. 1 3 Terms and definitions. 2 4 Design
19、4 4.1 General. 4 4.2 Sizes. 4 4.3 Pockets 4 4.4 Closures and seams. 5 5 Sampling and pre-treatment 5 5.1 Sampling 5 5.2 Pre-treatment of material . 5 5.3 Conditioning 5 6 General safety requirements . 6 6.1 Tensile strength 6 6.2 Tear strength. 6 6.3 Burst strength of knitted materials. 6 6.4 Seam s
20、trength. 6 6.5 Dimensional change of textile materials 6 6.6 Requirements for leather . 6 6.7 Flame spread. 6 6.8 Impact of spatter. 7 6.9 Heat transfer (radiation). 7 6.10 Electrical resistance. 7 6.11 Innocuousness 8 6.12 Summary of general safety requirements 8 7 Marking 9 8 Information supplied
21、by the manufacturer 9 8.1 General. 9 8.2 Intended use 9 8.3 Improper use . 10 8.4 Care and maintenance 10 Annex A (informative) Guidance for the selection of the type of welders clothing (Class 1/Class 2) 11 Annex B (informative) Information on UV radiation hazards 12 Annex C (informative) Uncertain
22、ty of measurement 13 Bibliography. 14 BS EN ISO 11611:2007 Annex ZA (informative) Relationship between this International Standard and the Essential Requirements of EU Directive 89/686/EEC 15 Licensed Copy: London South Bank University, London South Bank University, Fri Feb 15 06:36:30 GMT+00:00 200
23、8, Uncontrolled Copy, (c) BSI iv Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body inte
24、rested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnica
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN ISO 11611 2007
链接地址:https://www.31doc.com/p-3748798.html