BS-EN-ISO-15181-1-2007.pdf
《BS-EN-ISO-15181-1-2007.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-15181-1-2007.pdf(20页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 15181-1:2007 Paints and varnishes Determination of release rate of biocides from antifouling paints Part 1: General method for extraction of biocides The European Standard EN ISO 15181-1:2007 has the status of a British Standard ICS 87.040 ? BS EN ISO 15181-1:2007 This Bri
2、tish Standard was published under the authority of the Standards Policy and Strategy Committee on 28 September 2007 BSI 2007 ISBN 978 0 580 55942 6 National foreword This British Standard is the UK implementation of EN ISO 15181-1:2007. It supersedes BS EN ISO 15181-1:2004 which is withdrawn. The UK
3、 participation in its preparation was entrusted to Technical Committee STI/10, Test methods for paints. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users ar
4、e responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 15181-1 June 2007 ICS 87.040Supersedes EN ISO 15181-1:2004 E
5、nglish Version Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 1: General method for extraction of biocides (ISO 15181-1:2007) Peintures et vernis - Dtermination du taux de lixiviation des biocides contenus dans les peintures antisalissures - Partie 1:
6、 Mthode gnrale dextraction des biocides (ISO 15181-1:2007) Beschichtungsstoffe - Bestimmung der Auswaschrate von Bioziden aus Antifouling-Beschichtungen - Teil 1: Allgemeines Verfahren zur Extraktion von Bioziden (ISO 15181-1:2007) This European Standard was approved by CEN on 16 May 2007. CEN membe
7、rs are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applicatio
8、n to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has th
9、e same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portug
10、al, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CENAll rights of exploitation in any form and by any means
11、reserved worldwide for CEN national Members. Ref. No. EN ISO 15181-1:2007: E Foreword This document (EN ISO 15181-1:2007) has been prepared by Technical Committee ISO/TC 35 “Paints and varnishes“ in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes“, the secretariat of which is
12、 held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2007, and conflicting national standards shall be withdrawn at the latest by December 2007. This document supersedes EN ISO 1
13、5181-1:2004. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ire
14、land, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 15181-1:2007 has been approved by CEN as EN ISO 15181-1:2007 without any modifications. EN ISO 1518
15、1-1:2007 Reference number ISO 15181-1:2007(E) INTERNATIONAL STANDARD ISO 15181-1 Second edition 2007-06-01 Paints and varnishes Determination of release rate of biocides from antifouling paints Part 1: General method for extraction of biocides Peintures et vernis Dtermination du taux de lixiviation
16、des biocides contenus dans les peintures antisalissures Partie 1: Mthode gnrale dextraction des biocides EN ISO 15181-1:2007 ii iii Contents Page Foreword iv Introduction v 1 Scope . 1 2 Normative references. 1 3 Principle. 2 4 Required supplementary information. 2 5 Apparatus 2 6 Reagents and mater
17、ials . 4 7 Sampling 5 8 Preparation of test cylinders . 5 9 Procedure 6 10 Extraction method 6 11 Test report . 7 Annex A (normative) Supplementary information 8 Bibliography. 9 EN ISO 15181-1:2007 iv Foreword ISO (the International Organization for Standardization) is a worldwide federation of nati
18、onal standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. Internat
19、ional organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the ru
20、les given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at
21、 least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 15181-1 was prepared by Technical Committee ISO/
22、TC 35, Paints and varnishes, Subcommittee SC 9, General test methods for paints and varnishes. This second edition cancels and replaces the first edition (ISO 15181-1:2000), which has been technically revised, in particular to extend the use of the general extraction method to the later parts of ISO
23、 15181. ISO 15181 consists of the following parts, under the general title Paints and varnishes Determination of release rate of biocides from antifouling paints: Part 1: General method for extraction of biocides Part 2: Determination of copper-ion concentration in the extract and calculation of the
24、 release rate Part 3: Calculation of the zinc ethylene-bis(dithiocarbamate) (zineb) release rate by determination of the concentration of ethylenethiourea in the extract Part 4: Determination of pyridine-triphenylborane (PTPB) concentration in the extract and calculation of the release rate Part 5:
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN ISO 15181 2007
链接地址:https://www.31doc.com/p-3748856.html