BS-EN-ISO-15609-2-2001.pdf
《BS-EN-ISO-15609-2-2001.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-15609-2-2001.pdf(10页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 15609-2:2001 Incorporating Amendment No. 1 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 2: Gas welding The European Standard EN ISO 15609-2:2001, with the incorporation of amendment A1:2003, has the statu
2、s of a British Standard ICS 25.160.10 ? BS EN ISO 15609-2:2001 This British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 08 October 2001 BSI 9 February 2
3、004 ISBN 0 580 37647 8 National foreword This British Standard is the official English language version of EN ISO 15609-2:2001, including amendment A1:2003. It is identical with ISO 15609-2:2001. The UK participation in its preparation was entrusted to Technical Committee WEE/36, Approval testing of
4、 welding procedures and welders, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found
5、 in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are respon
6、sible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep th
7、e UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, pages 2 to 7 and a back cover. The BSI copyright notice displayed in this document ind
8、icates when the document was last issued. Amendments issued since publication Amd. No. DateComments 149539 February 2004 Revision to foreword and deletion of Annex ZA EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 15609-2 September 2001 + A1 December 2003 ICS 25.160.10 English version Spec
9、ification and qualification of welding procedures for metallic materials Welding procedure specification - Part 2: Gas welding (ISO 15609-2:2001) (includes amendment A1:2003) Descriptif et qualification dun mode opratoire de soudage pour les matriaux mtalliques - Descriptif dun mode opratoire de sou
10、dage - Partie 2: Soudage aux gaz (ISO 15609-2:2001) (inclut lamendement A1:2003) Anforderung und Anerkennung von Schweiverfahren fr metallische Werkstoffe - Schweianweisung - Teil 2: Gasschweien (ISO 15609-2:2001) (enthlt nderung A1:2003) This European Standard was approved by CEN on 2 May 2001; ame
11、ndment A1 was approved by CEN on 20 November 2003. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references conc
12、erning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own l
13、anguage and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal
14、, Slovakia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2001 CEN All rights of exploitation in any form and by any means reserved worldwide f
15、or CEN national Members. Ref. No. EN ISO 15609-2:2001 + A1:2003 E EN ISO 15609-2:2001 (E) 2 Contents page Foreword3 1Scope 4 2Normative references 4 3Terms and definitions4 4Technical contents of Welding Procedure Specification (WPS).4 4.1General4 4.2Information related to the manufacturer .5 4.3Inf
16、ormation related to the parent material.5 4.4Information common to all welding procedures.5 Annex A (informative) Manufacturers Welding Procedure Specification (WPS) 7 EN ISO 15609-2:2001 (E) Foreword The text of EN ISO 15609-2:2001 has been prepared by Technical Committee CEN/TC 121 “Welding”, the
17、secretariat of which is held by DS, in collaboration with Technical Committee ISO/TC 44 “Welding and allied processes”. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2002, and conflicting
18、national standards shall be withdrawn at the latest by March 2002. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. Annex A is informative. According to the CEN/CENELEC Internal Regulations, the national standards organi
19、zations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Foreword to amendment
20、A1 This document EN ISO 15609-2:2001/A1:2003 has been prepared by Technical Committee CEN/TC 121 “Welding”, the secretariat of which is held by DS, in collaboration with Technical Committee ISO/TC 44 “Welding and allied processes”. This Amendment to the European Standard EN ISO 15609-2:2001 shall be
21、 given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2004, and conflicting national standards shall be withdrawn at the latest by June 2004. This document has been prepared under a mandate given to CEN by the European Commissio
22、n and the European Free Trade Association. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland,
23、Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom. EN ISO 15609-2:2001 (E) 4 1 Scope This European Standard specifies requirements for the content of welding procedure specifications for gas welding processes. This standard
24、is part of a series of standards, details of this series are given in prEN ISO 15607, annex A. Variables listed in this standard are those influencing the quality of the welded joint. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publ
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN ISO 15609 2001
链接地址:https://www.31doc.com/p-3748859.html