BS-EN-ISO-1872-2-1997.pdf
《BS-EN-ISO-1872-2-1997.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-1872-2-1997.pdf(16页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 1872-2:1997 Incorporating Amendment No. 1 Plastics Polyethylene (PE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties The European Standard EN ISO 1872-2:1997, with the incorporation of amendment A1:2000, has the status
2、 of a British Standard ICS 83.080.20 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:26:43 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 1872-2:1997 This British Standard, having been prepared under the direction
3、 of the Sector Board for Materials and Chemicals, was published under the authority of the Standards Board and comes into effect on 15 June 1997 BSI 06-2001 ISBN 0 580 27556 6 National foreword This British Standard is the official English language version of EN ISO 1872-2:1997, including amendment
4、A1:2000. It is identical with ISO 1872:1997, including amendment 1:2000. The UK participation in its preparation was entrusted to Technical Committee PRI/32, Olefin plastics, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European comm
5、ittee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-refe
6、rences The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or using the “Find” facility of the BSI Standards Electronic Catalog
7、ue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document compri
8、ses a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii to iv, pages 1 to 6, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Sidelining in this docu
9、ment indicates the most recent changes by amendment. Amendments issued since publication Amd. No.DateComments 12040June 2001Indicated by a sideline Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:26:43 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE
10、NORM EN ISO 1872-2 April 1997 + A1 June 2000 ICS 83.080.20 Descriptors: See ISO document English version Plastics Polyethylene (PE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties (includes amendment A1:2000) (ISO 1872-2:1997 + A1:2000) Plastiqu
11、es Polythylne (PE) pour moulage et extrusion Partie 2: Prparation des prouvettes et dtermination des proprits (inclut lamendement A1:2000) (ISO 1872-2:1997 + A1:2000) Kunststoffe Polyethylen (PE)-Formmassen Teil 2: Herstellung von Probekrpern und Bestimmung von Eigenschaften (enthlt nderung A1:2000)
12、 (ISO 1872-2:1997 + A1:2000) This European Standard was approved by CEN on 1997-03-28. Amendment A1:2000 was approved by CEN on 2000-06-15. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a natio
13、nal standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any
14、other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Icelan
15、d, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1997 CEN All rights of exploi
16、tation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 1872-2:1997 + A1:2000 E Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:26:43 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 1872-2:1997 BSI 06-2001 Foreword The text of the International St
17、andard ISO 1872-2:1997 has been prepared by Technical Committee ISO/TC 61, Plastics, in collaboration with Technical Committee CEN/TC 249, Plastics, the Secretariat of which is held by IBN. This European Standard shall be given the status of a national standard, either by publication of an identical
18、 text or by endorsement, at the latest by October 1997, and conflicting national standards shall be withdrawn at the latest by October 1997. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standar
19、d: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of the International Standard ISO 1872-2:1997 was approved by CEN as a European Standard
20、without any modification. NOTENormative references to International Standards are listed in Annex ZA (normative). Foreword to amendment A1 The text of this amendment EN 1872-2:1997/A1:2000 to the EN 1872-2:1997 from Technical Committee ISO/IEC 61, Plastics, of the International Organization for Stan
21、dardization (ISO) has been taken over as an amendment to the European Standard by Technical Committee CEN/TC 249, Plastics, the Secretariat of which is held by IBN. This amendment to the European Standard EN ISO 1872-2:1997 shall be given the status of a national standard, either by publication of a
22、n identical text or by endorsement, at the latest by December 2000, and conflicting national standards shall be withdrawn at the latest by December 2000. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Eur
23、opean Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of the amendment to the International Standard ISO 1872-2:19
24、97/Amendment 1:2000 has been approved by CEN as an amendment to the European Standard without any modification. Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:26:43 GMT+00:00 2006, Uncontrolled Copy, (c) BSI + Amendment 1 2000-06-15 ISO 1872-2:1997/Amd.1:2000(E) Licensed Copy: sheffieldun
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN ISO 1872 1997
链接地址:https://www.31doc.com/p-3748882.html