BS-EN-ISO-12100-1-2003.pdf
《BS-EN-ISO-12100-1-2003.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-12100-1-2003.pdf(46页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 12100-1:2003 Incorporating Corrigendum No. 1 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology The European Standard EN ISO 12100-1:2003 has the status of a British Standard ICS 01.040.13; 13.110 ? BS EN ISO 12100-1:20
2、03 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 7 November 2003 BSI 19 January 2004 ISBN 0 580 42922 9 National foreword This British Standard is the official English language version of EN ISO 12100-1:2003. It is identical with ISO 12100-
3、1:2003. It supersedes BS EN 292-1:1991 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee MCE/3, Safeguarding of machinery, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary
4、. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue
5、or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the te
6、xt; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front co
7、ver, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii to v, a blank page, pages 1 to 33, the Annex ZA page, the Annex ZB page and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendme
8、nts issued since publication Amd. No. DateComments 14974 Corrigendum No. 1 19 January 2004 Incorporating corrected EN foreword and Annex ZA pages and adding Annex ZB page EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 12100-1 November 2003 ICS 01.040.13; 13.110Supersedes EN 292-1:1991 Engl
9、ish version Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology (ISO 12100- 1:2003) Scurit des machines - Notions fondamentales, principes gnraux de conception - Partie 1: Terminologie de base, mthodologie (ISO 12100-1:2003) Sicherheit von Mas
10、chinen - Grundbegriffe, allgemeine Gestaltungsleitstze - Teil 1: Grundstzliche Terminologie, Methodologie (ISO 12100-1:2003) This European Standard was approved by CEN on 9 June 2003. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving
11、this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (
12、English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Re
13、public, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Managem
14、ent Centre: rue de Stassart, 36 B-1050 Brussels 2003 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 12100-1:2003 E I NESO 21-001:1002( 3E) 2 CORRECTED 2003-12-17 Foreword This document (EN ISO 12100-1:2003) has been prepared by
15、 Technical Committee ISO/TC 199 “Safety of machinery“ in collaboration with Technical Committee CEN/TC 114 “Safety of machinery“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorse
16、ment, at the latest by May 2004, and conflicting national standards shall be withdrawn at the latest by May 2004. This document supersedes EN 292-1:1991. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports esse
17、ntial requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZB, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European
18、Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 12100-1:2003 has been approved by
19、 CEN as EN ISO 12100-1:2003 without any modifications. NOTE Normative references to International Standards are listed in Annex ZA (normative). EN ISO 121001:2003 Reference number ISO 12100-1:2003(E) NRETNIITAOLAN NATSDRAD OSI 100121- iFsrt edition -300211-10 Safety of machinery Basic concepts, gene
20、ral principles for design Part 1: Basic terminology, methodology Scurit des machines Notions fondamentales, principes gnraux de conception Partie 1: Terminologie de base, mthodologie Referecne unmber OSI -0012102:1)E(30 OSI 3002 INTERNATIONAL STANDARD ISO 12100-1 First edition 2003-11-01 tefaSy fo c
21、amhinrey B c cisaecnop,st icnirp lareneglpse gised rofn :1 traP ret cisaBmniology, emhtdoology cSurit des camhseni itoNsno ofadnnemtlaserp ,incisep grnxua c edcnoepit no raPtie :1 Terminolgoei ed basem ,ohtdolgoei EN ISO 121001:2003 IS-00121 O1:(3002E) ii EN ISO 121001:2003 IS-00121 O1:(3002E) iii C
22、ontents Page Forewordiv Introduction v 1 Scope1 2 Normative references .1 3 Terms and definitions.1 4 Hazards to be taken into account when designing machinery8 4.1 General.8 4.2 Mechanical hazard 8 4.3 Electrical hazard9 4.4 Thermal hazard9 4.5 Hazard generated by noise 10 4.6 Hazards generated by
23、vibration 10 4.7 Hazards generated by radiation 10 4.8 Hazards generated by materials and substances .10 4.9 Hazards generated by neglecting ergonomic principles in machine design . 10 4.10 Slipping, tripping and falling hazards.11 4.11 Hazard combinations11 4.12 Hazards associated with the environm
24、ent in which the machine is used11 5 Strategy for risk reduction.11 5.1 General provisions11 5.2 Specification of the limits of the machine12 5.3 Hazard identification, risk estimation and risk evaluation .12 5.4 Elimination of hazards or reduction of risk by protective measures 14 5.5 Achievement o
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN ISO 12100 2003
链接地址:https://www.31doc.com/p-3749063.html