BS-Z-100-1999 ISO-14625-1999.pdf
《BS-Z-100-1999 ISO-14625-1999.pdf》由会员分享,可在线阅读,更多相关《BS-Z-100-1999 ISO-14625-1999.pdf(26页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD AEROSPACE SERIES BS Z 100:1999 ISO 14625: 1999 Space systems Ground support equipment for use at launch, landing, or retrieval sites General requirements ICS 49.100; 49.140 Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 02:51:20 GMT+00:00 2006,
2、 Uncontrolled Copy, (c) BSI BS Z 100:1999 This British Standard, having been prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 June 1999 BSI 03-2000 ISBN 0 580 32648 9 National foreword This Brit
3、ish Standard reproduces verbatim ISO 14625:1999 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee ACE/68, Space systems and operations, which has the responsibility to: aid enquirers to understand the text; present to the resp
4、onsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on r
5、equest to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility o
6、f the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations.
7、 Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the ISO title page, pages ii to vi, pages 1 to 14, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicat
8、ed in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 02:51:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS Z 100:1999 BSI 03-2000i Contents Page National fo
9、rewordInside front cover Forewordv Text of ISO 146251 Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 02:51:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 02:51:20 GMT+
10、00:00 2006, Uncontrolled Copy, (c) BSI Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 02:51:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS Z 100:1999 ii BSI 03-2000 Contents Page Forewordv Introduction1 1Scope1 2Normative references1 3Definitions, symbols and
11、 abbreviated terms2 3.1Definitions2 3.2Symbols and abbreviated terms2 4General3 5Functional designations3 5.1General3 5.2Servicing3 5.3Checkout and test3 5.4Handling and transportation3 5.5Auxiliary3 5.6Umbilical3 6Characteristics3 6.1Performance characteristics3 6.1.1Operability3 6.1.2Interfaces3 6
12、.1.3Producibility4 6.2Physical characteristics4 6.2.1Limited life4 6.2.2Useful life4 6.2.3Protective coating4 6.2.4Colours4 6.2.5Metric system4 6.2.6Redundancy4 6.3Reliability4 6.4Maintainability4 6.5Environmental conditions4 6.5.1General4 6.5.2Natural environment4 6.5.3Launch-induced environment4 6
13、.5.4Controlled interior environment5 6.5.5Controlled clean environment5 6.5.6Uncontrolled interior environment5 6.5.7Fire/explosion hazard environment5 6.5.8Environmental test methods5 6.5.9Seismic environment5 6.6Transportability5 7Documentation5 7.1Drawings and specifications5 7.2Technical documen
14、tation5 7.3Operations and maintenance documentation (OMD)5 8Supply support5 9Personnel and training5 10Qualification6 11Quality assurance6 11.1General6 11.2Responsibility for verification6 Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 02:51:20 GMT+00:00 2006,
15、Uncontrolled Copy, (c) BSI BS Z 100:1999 BSI 03-2000iii Page 11.3Testing6 11.3.1General6 11.3.2Load test6 11.3.3Non-destructive test (NDT)6 11.3.4Test reports6 11.3.5Instrumentation calibration6 11.4Quality conformance verification7 12Packaging7 12.1Preservation and packaging7 12.2Shipping container
16、s7 12.3Weight and size7 12.4Parts protection7 12.5Precision clean parts7 12.6Marking7 12.7Environmental recording instruments7 12.8Transportation and storage7 13Design and construction requirements7 13.1Structural design7 13.1.1Structural steel and other structures7 13.1.2Safety factor7 13.1.3Critic
17、al weld7 13.2Mechanical design8 13.2.1Pneumatics8 13.2.2Cryogenics8 13.2.3Hypergols8 13.2.4Hydrocarbons8 13.2.5Hydraulics8 13.2.6Environmental control system (ECS) and coolant servicing systems8 13.2.7Life support8 13.2.8Lifting devices8 13.2.9Springs8 13.2.10 Umbilical design8 13.2.11 Torque limits
18、8 13.2.12 Tethers8 13.2.13 Jacks8 13.2.14 Transportation equipment8 13.2.15 Pressure vessels9 13.3Electrical/electronic design9 13.3.1Electrical control and monitor equipment9 13.3.2Pneumatic and hydraulic mechanical components9 13.3.3Internal wiring9 13.3.4Pyrotechnic systems9 13.3.5Electrical powe
19、r9 13.3.6Bonding and grounding9 13.3.7Hazard-proofing9 13.3.8Lightning protection9 13.3.9Software9 Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 02:51:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS Z 100:1999 iv BSI 03-2000 Page 13.3.10 Firmware9 13.4Materia
20、ls, parts and processes9 13.4.1Materials9 13.4.2Parts10 13.4.3Processes12 13.5Electromagnetic compatibility (EMC)13 13.6Identification markings and labels13 13.6.1Systems and equipment13 13.6.2Load test13 13.6.3Piping systems13 13.6.4Compressed gas cylinders13 13.6.5Load capacity13 13.6.6Test weight
21、s13 13.6.7Electrical cable assemblies13 13.6.8Serial numbers13 13.7Workmanship13 13.8Interchangeability14 13.9Safety14 13.10Human performance14 13.10.1 General14 13.10.2 Operating characteristics14 13.10.3 Personnel lifting limits14 13.10.4 Propellant handlers ensemble (PHE) operators14 13.11Securit
22、y14 Annex A (informative) BibliographyInside back cover Table 1 Colours for GSE4 Descriptors: Aircraft industry, space systems, ground support equipment, aircraft utility equipment, specifications, characteristics, performance, safety, packaging, marking. Licensed Copy: London South Bank University,
23、 London South Bank University, Sat Dec 09 02:51:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS Z 100:1999 BSI 03-2000v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International S
24、tandards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, als
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-Z-100-1999 ISO-14625-1999 BS 100 1999 ISO 14625
链接地址:https://www.31doc.com/p-3749067.html