BS-EN-62329-2-2006.pdf
《BS-EN-62329-2-2006.pdf》由会员分享,可在线阅读,更多相关《BS-EN-62329-2-2006.pdf(52页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 62329-2:2006 Heat shrinkable moulded shapes Part 2: Methods of test The European Standard EN 62329-2:2006 has the status of a British Standard ICS 29.035.20 ? Licensed Copy: London South Bank University, London South Bank University, Sun Dec 24 04:17:17 GMT+00:00 2006, Uncontr
2、olled Copy, (c) BSI BS EN 62329-2:2006 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2006 BSI 2006 ISBN 0 580 49679 1 National foreword This British Standard was published by BSI. It is the UK implementation of EN 62329-2:2006.
3、It is identical with IEC 62329-2:2006. The UK participation in its preparation was entrusted by Technical Committee GEL/15, Material specifications, to Subcommittee GEL/15/3, Flexible insulating sleeving for electrical purposes. A list of organizations represented on GEL/15/3 can be obtained on requ
4、est to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComment
5、s Licensed Copy: London South Bank University, London South Bank University, Sun Dec 24 04:17:17 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD EN 62329-2 NORME EUROPENNE EUROPISCHE NORM October 2006 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Norma
6、lisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62329-2:2006 E ICS 29.035.20 English versio
7、n Heat shrinkable moulded shapes Part 2: Methods of test (IEC 62329-2:2006) Gaines thermortractables Partie 2: Mthodes dessai (CEI 62329-2:2006) Wrmeschrumpfende Formteile Teil 2: Prfverfahren (IEC 62329-2:2006) This European Standard was approved by CENELEC on 2006-10-01. CENELEC members are bound
8、to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Cent
9、ral Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same st
10、atus as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Po
11、rtugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: London South Bank University, London South Bank University, Sun Dec 24 04:17:17 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Foreword The text of document 15/316/FDIS, future edition 1 of IEC 62329-2
12、, prepared by IEC TC 15, Standards on specifications for electrical insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62329-2 on 2006-10-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by pub
13、lication of an identical national standard or by endorsement (dop) 2007-07-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2009-10-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62329-2:2006 was
14、 approved by CENELEC as a European Standard without any modification. _ 2 EN 62329-2:2006 Licensed Copy: London South Bank University, London South Bank University, Sun Dec 24 04:17:17 GMT+00:00 2006, Uncontrolled Copy, (c) BSI CONTENTS INTRODUCTION.7 1 Scope.8 2 Normative references .8 3 Test condi
15、tions.19 4 Standard test specimens 10 4.1 Moulded shape material specimens.10 4.2 Moulded shape compatibility specimens10 5 Dimensions 10 5.1 Number of test specimens.10 5.2 Procedure .10 5.3 Result .10 6 Density.10 6.1 Number of test specimens.10 6.2 Procedure .10 6.3 Report.10 6.4 Result .10 7 Hea
16、t shock .11 7.1 Number of test specimens.11 7.2 Form of test specimens .11 7.3 Procedure .11 7.4 Report.11 7.5 Result .11 8 Bending at low temperature11 8.1 Number and form of test specimens 11 8.2 Procedure .11 8.3 Result .11 9 Dimensional stability on storage .11 9.1 Number of test specimens.11 9.
17、2 Procedure .12 9.3 Result .12 10 Tensile strength and elongation at break 12 10.1 Number and form of test specimens 12 10.2 Conditioning12 10.3 Test temperature.12 10.4 Procedure .12 10.5 Calculations 13 10.6 14 10.7 Result .13 11 Secant modulus at 2 % elongation13 11.1 Number and form of test spec
18、imens 13 11.2 Procedure .13 11.3 Calculation 14 11.4 Report.14 11.5 Result .14 3 EN 62329-2:2006 Licensed Copy: London South Bank University, London South Bank University, Sun Dec 24 04:17:17 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 12 Electric strength .14 12.1 Number and form of test specimens 1
19、4 12.2 Conditioning14 12.3 Electrodes.14 12.4 Procedure .14 12.5 Result .14 12.6 Result .15 13 Volume resistivity after damp heat15 13.1 Number and form of test specimens 15 13.2 Electrodes.15 13.3 Procedure .15 13.4 Result .15 14 Permittivity and dissipation factor .15 14.1 Number and form of test
20、specimens. .15 14.2 Electrodes.15 14.3 Procedure .15 14.4 Calculation 15 14.5 Result .15 15 Resistance to tracking 16 15.1 Report.16 15.2 Result .16 16 Flammability.16 16.1 Number and form of test specimens 16 16.2 Procedure .16 16.3 Result .16 17 Oxygen index .16 17.1 Oxygen index at ambient temper
21、ature .16 17.2 Oxygen index at elevated temperature 16 18 Copper corrosion (presence of corrosive volatiles) .16 18.1 Principle16 18.2 Apparatus17 18.3 Number and form of test specimens 17 18.4 Procedure .17 18.5 Report.17 18.6 Result .17 19 Colour fastness to light.18 19.1 Principle18 19.2 Test spe
22、cimen.18 19.3 Procedure .18 19.4 Result .18 20 Resistance to selected fluids 18 20.1 Principle18 20.2 Choice of fluid .18 20.3 Methods of assessment.18 20.4 Number and form of test specimens 19 20.5 Procedure .19 20.6 Result .19 4 EN 62329-2:2006 Licensed Copy: London South Bank University, London S
23、outh Bank University, Sun Dec 24 04:17:17 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 21 Long term heat ageing (3000 h)19 21.1 Number and form of test specimens 19 21.2 Procedure .19 21.3 Report.20 21.4 Result .20 22 Mass 20 22.1 Number of test specimens.20 22.2 Procedure .20 22.3 Result .20 23 Heat
24、ageing20 23.1 Number and form of test specimens 20 23.2 Procedure .20 24 Water absorption20 25 Colour stability to heat20 25.1 Number of test specimens.20 25.2 Form of test specimens .20 25.3 Procedure .21 25.4 Report.21 25.5 Result .21 26 Smoke index.21 26.1 Definitions.21 26.2 Principle21 26.3 App
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 62329 2006
链接地址:https://www.31doc.com/p-3749104.html