BS-EN-60110-1-1998 IEC-60110-1-1998.pdf
《BS-EN-60110-1-1998 IEC-60110-1-1998.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60110-1-1998 IEC-60110-1-1998.pdf(24页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60110-1:1998 IEC 60110-1: 1998 Power capacitors for induction heating installations Part 1: General The European Standard EN 60110-1:1998 has the status of a British Standard ICS 31.060.70 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:46:37 GMT+00:00 2006, Uncontro
2、lled Copy, (c) BSI BS ISO 60110-1:1998 This British Standard, having been prepared under the direction of the Electrotechnical Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 December 1998 BSI 05-1999 ISBN 0 580 30740 9 National foreword Thi
3、s British Standard is the English language version of EN 60110-1:1998. It is identical with IEC 60110-1:1998. The UK participation in its preparation was entrusted to Technical Committee PEL/33, Power capacitors, which has the responsibility to: aid enquirers to understand the text; present to the r
4、esponsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained o
5、n request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers fro
6、m both systems. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to international publications with their corresponding European publications. The British Standards which implement these international or Europea
7、n publications may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract.
8、Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 18, an
9、inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun,
10、na, Fri Nov 10 16:46:37 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 60110-1:1998 BSI 05-1999i Contents Page National forewordInside front cover Foreword2 Text of EN 60110-15 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:46:37 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Lice
11、nsed Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:46:37 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60110-1 August 1998 ICS 29.120.99 Supersedes HD 207 S1:1977 Descriptors: Induction heating, capacitors, power capacitors, capacitor banks, defin
12、itions, generalities, quality, capacity measurements, dielectric strength tests, leak test, thermal stability, safety, installation, marking English version Power capacitors for induction heating installations Part 1: General (IEC 60110-1:1998) Condensateurs de puissance pour les installations de gn
13、ration de chaleur par induction Partie 1: Gnralits (CEI 60110-1:1998) Leistungskondensatoren fr induktive Erwrmungsanlagen Teil 1: Allgemeines (IEC 60110-1:1998) This European Standard was approved by CENELEC on 1998-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulation
14、s which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This Eur
15、opean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are
16、 the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization
17、 Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1998 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60110-1:1998 E Licensed
18、Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:46:37 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60110-1:1998 BSI 05-1999 2 Foreword The text of document 33/289/FDIS, future edition 1 of IEC 60110-1, prepared by IEC TC 33, Power capacitors, was submitted to the IEC-CENELEC parallel vote and was
19、approved by CENELEC as EN 60110-1 on 1998-08-01. This European Standard supersedes HD 207 S1:1977. The following dates were fixed: Annexes designated “normative” are part of the body of the standard. Annexes designated “informative” are given for information only. In this standard, Annex A and Annex
20、 ZA are normative and Annex B and Annex C are informative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC 60110-1:1998 was approved by CENELEC as a European Standard without any modification. In the official version, for Annex C, Bibliography, the f
21、ollowing notes have to be added for the standards indicated: Contents Page Foreword2 1General5 1.1Scope and object5 1.2Normative references5 1.3Definitions5 1.4Service conditions7 2Quality requirements and tests8 2.1Test requirements8 2.2Classification of tests8 2.3Capacitance measurement8 2.4Measur
22、ement of the tangent of the loss angle (tan ) of a capacitor9 2.5Voltage test between terminals (routine test)9 2.6Voltage test between terminals and container9 2.7Test on internal discharge device10 2.8Sealing test10 2.9Thermal stability test10 2.10 Capacitor losses test11 2.11 Capacitance as a fun
23、ction of temperature11 2.12 Sealing test of cooling ducts, if any11 2.13 Self-healing test (for self-healing metallized dielectric capacitors)12 2.14 Short-circuit discharge test12 2.15 Ageing test (see IEC 60110-2)12 2.16 Destruction test (see IEC 60110-2)12 2.17 Disconnecting tests on internal fus
24、es, if any (see IEC 60110-2)12 3Overloads12 3.1Maximum permissible voltage12 3.2Switching voltages12 3.3Maximum permissible current12 4Safety requirements13 4.1Creepage distances13 4.2Discharge device13 4.3Container connections13 4.4Protection of the environment13 4.5Additional safety requirements13
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-60110-1-1998 IEC-60110-1-1998 BS EN 60110 1998 IEC
链接地址:https://www.31doc.com/p-3749221.html