BS-EN-60896-11-2003.pdf
《BS-EN-60896-11-2003.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60896-11-2003.pdf(24页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60896-11:2003 Stationary lead-acid batteries Part 11: Vented types General requirements and methods of tests The European Standard EN 60896-11:2003 has the status of a British Standard ICS 29.220.20 ? BS EN 60896-11:2003 This British Standard was published under the authority
2、of the Standards Policy and Strategy Committee on 12 March 2003 BSI 12 March 2003 ISBN 0 580 41365 9 National foreword This British Standard is the official English language version of EN 60896-11:2003. It is identical with IEC 60896-11:2002. It supersedes BS EN 60896-1:1992 which will be withdrawn
3、on 2005-12-01. The UK participation in its preparation was entrusted to Technical Committee PEL/21, Secondary cells and batteries, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standard
4、s which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online This pub
5、lication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible internati
6、onal/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title
7、 page, pages 2 to 20, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARDEN 60896-11 NORME EUROPENNE EUROPISCHE NORMJanuary 2003 CENELEC Europ
8、ean Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC -All rights of exploitation in any form and by any means reserved worldwide for
9、CENELEC members. Ref. No. EN 60896-11:2003 E ICS 29.220.20Supersedes EN 60896-1:1991 + A2:1992 English version Stationary lead-acid batteries Part 11: Vented types - General requirements and methods of tests (IEC 60896-11:2002) Batteries stationnaires au plomb Partie 11: Batteries au plomb du type o
10、uvert - Prescriptions gnrales et mthodes dessai (CEI 60896-11:2002) Ortsfeste Blei-Akkumulatoren Teil 11: Geschlossene Batterien - Allgemeine Anforderungen und Prfverfahren (IEC 60896-11:2002) This European Standard was approved by CENELEC on 2002-12-01. CENELEC members are bound to comply with the
11、CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or
12、to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the officia
13、l versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. Forewo
14、rd The text of document 21/572/FDIS, future edition 1 of IEC 60896-11, prepared by IEC TC 21, Secondary cells and batteries, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60896-11 on 2002-12-01. This European Standard supersedes EN 60896-1:1991 + A2:1992. The follo
15、wing dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement(dop)2003-09-01 latest date by which the national standards conflicting with the EN have to be withdrawn(dow)2005-12-01 Annexes designated “nor
16、mative“ are part of the body of the standard. Annexes designated “informative“ are given for information only. In this standard, annex ZA is normative and annex A is informative. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60896-11:2002 was app
17、roved by CENELEC as a European Standard without any modification. _ Page 2 EN 6089611:2003 CONTENTS 1Scope and object4 2Normative references .4 3Definitions 5 4Mechanical strength .5 5Electrolyte levels 5 6Electrolyte reserve5 7Capacity.6 8Suitability for floating battery operation.6 9Endurance7 10C
18、harge retention.7 11Short-circuit current and internal resistance8 12Accuracy of measuring instruments 8 13Preparation of cells and batteries for testing.9 14Capacity test 9 15Test of suitability for floating battery operation .11 16Endurance in discharge-charge cycles12 17Endurance in overcharge12
19、18Charge retention test13 19Short-circuit current and internal resistance determination13 20Test sequence15 21Cell and battery markings.15 22Information to be included on the cell or monobloc package .16 23Recommended information for the battery room .16 24Marking of polarity16 Annex A (informative)
20、 Recommended tests17 Annex ZA (normative) Normative references to international publications with their corresponding European publication.20 Figure 1 Discharge characteristic U = f(I).14 Figure 2 Typical test circuit 15 Table 1 Test sequence recommended for type tests.15 Table A.1 Recommended use o
21、f tests for stationary battery applications .18 Table A.2 Recommended use of tests appropriate to types of stationary cells and batteries.19 Page 3 EN 6089611:2003 STATIONARY LEAD-ACID BATTERIES Part 11: Vented types General requirements and methods of tests 1 Scope and object This part of IEC 60896
22、 is applicable to lead-acid cells and batteries which are designed for service in fixed locations (i.e. not habitually to be moved from place to place) and which are permanently connected to the load and to the d.c. power supply. Batteries operating in such applications are called “stationary batter
23、ies”. Any type or construction of lead-acid battery may be used for stationary battery applications. This part 11 of the standard is applicable to vented types only. The object of this standard is to specify general requirements and the main characteristics, together with corresponding test methods
24、associated with all types and construction modes of lead-acid stationary batteries, excluding valve-regulated types. Recommendations on the use of tests for stationary battery application are given in Table A.1. Recommendations relating the type of cell or monobloc to the use of tests are given in T
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 60896 11 2003
链接地址:https://www.31doc.com/p-3749574.html