BS-EN-ISO-11126-1-1997 BS-7079-F1-1997.pdf
《BS-EN-ISO-11126-1-1997 BS-7079-F1-1997.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-11126-1-1997 BS-7079-F1-1997.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 11126-1:1997 BS 7079-F1: 1997 Preparation of steel substrates before application of paints and related products Group F: Non-metallic blast cleaning abrasives Part F1: General introduction and classification The European Standard EN ISO 11126-1:1997 has the status of a Bri
2、tish Standard ICS 25.220.10; 87.020 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 09:01:50 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 11126-1:1997 This British Standard, having been prepared under the direction of the Sector Board for Materials and Chemicals, was published under t
3、he authority of the Standards Board and comes into effect on 15 June 1997 BSI 02-1999 The following BSI references relate to the work on this standard: Committee reference STI/21 Announcement in BSI News April 1997 ISBN 0 580 27634 1 Committees responsible for this British Standard The preparation o
4、f this British Standard was entrusted to Technical Committee STI/21, Surface preparation of steel, upon which the following bodies were represented: Association of Consulting Engineers British Chemical Engineering Contractors Association British Coatings Federation Ltd British Constructional Steelwo
5、rk Association Ltd British Grit Association British Iron and Steel Producers Association British Railways Board Department of Transport Electricity Association Institute of Corrosion National Federation of Painting and Decorating Contractors Oil and Colour Chemists Association Paint Research Associa
6、tion Royal Society of Chemistry Water Services Association of England and Wales Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 09:01:50 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 11126-1:1997 BSI 02-1999i Contents Page Commit
7、tees responsibleInside front cover National forewordii Foreword2 Forewordii Introduction1 1Scope1 2Definitions1 3Classification2 4Designation of abrasives2 5Identification and marking2 Annex A (informative) International standards for metallic and non-metallic blast-cleaning abrasivesInside back cov
8、er Table 1 Commonly used non-metallic (N) blast-cleaning abrasives for steel substrate preparation2 Table 2 Initital particle shape2 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 09:01:50 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 11126-1:1997 ii BSI 02-1999 National foreword This
9、 British Standard has been prepared by Technical Committee STI/21 and is the English language version of EN ISO 11126-1:1997 Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 1: General introduction and cla
10、ssification, published by the European Committee for Standardization (CEN). It is identical with ISO 11126-1:1993 including the two Technical Corrigenda published in 1997, published by the International Organization for Standardization (ISO). ISO 11126-1 was produced as a result of international dis
11、cussions in which the United Kingdom took an active part. This standard supersedes BS 7079-F1:1994, which is withdrawn. International Standard ISO 11126-1 was prepared by Technical Committee ISO/TC35, Paints and varnishes, Sub-committee SC12, Preparation of steel substrates before application of pai
12、nts and related products. Other parts of ISO 11126 are identical with the following parts of BS 7079. Part F3: Specification for copper refinery slag; Part F4: Specification for coal furnace slag; Part F5: Specification for nickel refinery slag; Part F6: Specification for iron furnace slag; Part F7:
13、 Specification for fused aluminium oxide; Part F8: Specification for olivine sand. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itsel
14、f confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN ISO title page, page 2, the ISO title page, page ii, pages 1 and 2, an inside back cover and a back cover. This standard has been updated (see copyright dat
15、e) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 09:01:50 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11126-1 February 1
16、997 ICS 87.020 Descriptors: See ISO document English version Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 1: General introduction and classification (ISO 11126-1:1993, including Technical Corrigenda 1:
17、1997 and 2:1997) Prparation des subjectiles dacier avant application de peintures et de produits assimils Spcifications pour abrasifs non mtalliques destins la prparation par projection Partie 1: Introduction gnrale et classification (ISO 11126-1:1993, Rectificatifs Techniques 1:1997 et 2:1997, incl
18、us) Vorbereitung von Stahloberflchen vor dem Auftragen von Beschichtungsstoffen Anforderungen an nichtmetallische Strahlmittel Teil 1: Allgemeine Einleitung und Einteilung (ISO 11126-1:1993, einschlielich Technische Korrekturen 1:1997 und 2:1997) This European Standard was approved by CEN on 1996-12
19、-27. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained
20、 on application to the Central Secretariat or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretari
21、at has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for
22、 Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1997 Copyright reserved to CEN members Ref. No. EN ISO 11126-1:1997 E Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 09:01:50 GMT+00:00 2006, Uncontrolled C
23、opy, (c) BSI BS EN ISO 11126-1:1997 BSI 02-1999 2 Foreword The text of the International Standard from Technical Committee ISO/TC 35 “Paints and varnishes” of the International Organization for Standardization (ISO) has been taken over as an European Standard by Technical Committee CEN/TC 139 “Paint
24、s and varnishes”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by month of August 1997, and conflicting national standards shall be withdrawn at the latest
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-ISO-11126-1-1997 BS-7079-F1-1997 BS EN ISO 11126 1997 7079 F1
链接地址:https://www.31doc.com/p-3749945.html