BS-ISO-3597-1-2003.pdf
《BS-ISO-3597-1-2003.pdf》由会员分享,可在线阅读,更多相关《BS-ISO-3597-1-2003.pdf(16页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS ISO 3597-1:2003 Textile-glass-reinforced plastics Determination of mechanical properties on rods made of roving-reinforced resin Part 1: General considerations and preparation of rods ICS 59.100.10; 83.120 ? Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 02:12:49 GMT+00:0
2、0 2006, Uncontrolled Copy, (c) BSI BS ISO 3597-1:2003 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 October 2003 BSI 30 October 2003 ISBN 0 580 42381 1 National foreword This British Standard reproduces verbatim ISO 3597-1:2003 and imple
3、ments it as the UK national standard. It supersedes BS 2782-10 Method 1008A:1996 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PRI/42, Fibre reinforced thermosetting plastics and prepregs, which has the responsibility to: A list of organizations rep
4、resented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by us
5、ing the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity
6、from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in t
7、he UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii to iv, pages 1 to 9 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateC
8、omments Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 02:12:49 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Reference number ISO 3597-1:2003(E) INTERNATIONAL STANDARD ISO 3597-1 Second edition 2003-10-01 Textile-glass-reinforced plastics Determination of mechanical properties on rods made of
9、roving-reinforced resin Part 1: General considerations and preparation of rods Plastiques renforcs verre textile Dtermination des proprits mcaniques sur joncs de stratifils Partie 1: Notions gnrales et prparation des joncs BS ISO 35971:2003 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 02:1
10、2:49 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 02:12:49 GMT+00:00 2006, Uncontrolled Copy, (c) BSI IS-7953 O1:(3002E) I SO 3002 All irhgts seredevr iii Contents Page Forewordiv 1 Scope1 2 Normative references .1 3 Principles.1 4 Conditioning
11、 and test atmospheres2 5 Preparation of test specimens.2 Annex A (informative) Examples of resin systems and curing conditions 8 Bibliography .9 BS ISO 35971:2003 iii Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 02:12:49 GMT+00:00 2006, Uncontrolled Copy, (c) BSI IS-7953 O1:(3002E) vi I SO
12、 3002 All irhgts seredevr Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested
13、in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commi
14、ssion (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technica
15、l committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shal
16、l not be held responsible for identifying any or all such patent rights. ISO 3597-1 was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 13, Composites and reinforcement fibres. This second edition cancels and replaces the first edition (ISO 3597-1:1993), which has been technical
17、ly revised. ISO 3597 consists of the following parts, under the general title Textile-glass-reinforced plastics Determination of mechanical properties on rods made of roving-reinforced resin: Part 1: General considerations and preparation of rods Part 2: Determination of flexural strength Part 3: De
18、termination of compressive strength Part 4: Determination of apparent interlaminar shear strength BS ISO 35971:2003 iv Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 02:12:49 GMT+00:00 2006, Uncontrolled Copy, (c) BSI INTENRATIONAL TSANDADR IS-7953 O1:(3002E) I SO 3002 All irhgts seredevr 1
19、Textile-glass-reinforced plastics Determination of mechanical properties on rods made of roving-reinforced resin Part 1: General considerations and preparation of rods 1 Scope This part of ISO 3597 provides general information and specifies a method for preparing specimens (rods) intended to be used
20、 for tests specified in the other parts of ISO 3597. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (includin
21、g any amendments) applies. ISO 291, Plastics Standard atmospheres for conditioning and testing ISO 1172, Textile-glass-reinforced plastics Prepregs, moulding compounds and laminates Determination of the textile-glass and mineral-filler content Calcination methods ISO 3597-2, Textile-glass-reinforced
22、 plastics Determination of mechanical properties on rods made of roving-reinforced resin Part 2: Determination of flexural strength ISO 3597-3, Textile-glass-reinforced plastics Determination of mechanical properties on rods made of roving-reinforced resin Part 3: Determination of compressive streng
23、th ISO 3597-4, Textile-glass-reinforced plastics Determination of mechanical properties on rods made of roving-reinforced resin Part 4: Determination of apparent interlaminar shear strength 3 Principles 3.1 General The test methods specified in the other parts of ISO 3597 and briefly described herea
24、fter are generally performed on “as-moulded” rods. They may, however, also be carried out on rods which have been subjected to treatment in boiling water for a specified length of time. It is also possible to carry out the tests after conditioning exposures other than boiling water. The medium used
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS ISO 3597 2003
链接地址:https://www.31doc.com/p-3750404.html