BS-ISO-19472-2006.pdf
《BS-ISO-19472-2006.pdf》由会员分享,可在线阅读,更多相关《BS-ISO-19472-2006.pdf(18页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS ISO 19472:2006 Incorporating corrigendum no. 1 Machinery for forestry Winches Dimensions, performance and safety ICS 65.060.80 ? Licensed Copy: London South Bank University, London South Bank University, Sun Jun 17 07:15:49 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS ISO 19472:
2、2006 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2006 BSI 2007 ISBN 0 580 48358 4 National foreword This British Standard was published by BSI. It is the UK implementation of ISO 19472:2006, incorporating corrigendum November 2006.
3、 It supersedes BS 6385:1996 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee AGE/29, Forestry machinery (excluding tractors). A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not p
4、urport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments 17129 Corrigendum No. 1 29 June 2007Replacement
5、 of Equation (3) in 5.1.2 Licensed Copy: London South Bank University, London South Bank University, Sun Jun 17 07:15:49 GMT+00:00 2007, Uncontrolled Copy, (c) BSI Reference number ISO 19472:2006(E) INTERNATIONAL STANDARD ISO 19472 First edition 2006-03-15 Machinery for forestry Winches Dimensions,
6、performance and safety Matriel forestier Treuils Dimensions, performance et scurit BS ISO 19472:2006 Licensed Copy: London South Bank University, London South Bank University, Sun Jun 17 07:15:49 GMT+00:00 2007, Uncontrolled Copy, (c) BSI ii Licensed Copy: London South Bank University, London South
7、Bank University, Sun Jun 17 07:15:49 GMT+00:00 2007, Uncontrolled Copy, (c) BSI iii Contents Page Foreword iv 1 Scope . 1 2 Normative references. 1 3 Terms and definitions. 2 4 Symbols. 3 5 Performance requirements 4 5.1 Drum storage capacity. 4 5.2 Line pull, F. 5 5.3 Line speed, v 6 6 Safety requi
8、rements . 6 6.1 Mechanical safety. 6 6.2 Drum. 6 6.3 Rope breaking load. 7 6.4 Rope fastening 7 6.5 Brake 7 6.6 Controls . 7 6.7 Overload device 8 6.8 Stability 8 6.9 Moving parts for power transmission of winches. 8 7 Information for use. 8 7.1 Instruction handbook. 8 7.2 Marking 9 7.3 Warnings 9 B
9、ibliography. 10 BS ISO 19472:2006 Licensed Copy: London South Bank University, London South Bank University, Sun Jun 17 07:15:49 GMT+00:00 2007, Uncontrolled Copy, (c) BSI iv Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
10、 member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, gover
11、nmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC D
12、irectives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member
13、bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 19472 was prepared by Technical Committee ISO/TC 23, Tractors and machiner
14、y for agriculture and forestry, Subcommittee SC 15, Machinery for forestry. This first edition of ISO 19472 cancels and replaces ISO 4254-4:1990, ISO 6816:1984 and ISO 6687:1994, of which it constitutes a technical revision. BS ISO 19472:2006 Licensed Copy: London South Bank University, London South
15、 Bank University, Sun Jun 17 07:15:49 GMT+00:00 2007, Uncontrolled Copy, (c) BSI 1 Machinery for forestry Winches Dimensions, performance and safety 1 Scope This International Standard defines dimensions and specifies performance and safety requirements for winches used in forestry. It is applicable
16、 to fixed and detachable winches and their components mounted on mobile and self-propelled forestry machinery such as skidders and forwarders as defined in ISO 6814 and on agricultural tractors used for skidding in forestry operations. It is not applicable to winches used for hoisting operations on
17、cranes, draglines, high lead logging, cable logging systems or yarding. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced
18、 document (including any amendments) applies. ISO 3457:2003, Earth-moving machinery Guards Definitions and requirements ISO 3600:1996, Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Operators manuals Content and presentation ISO 3767-4:1993, Tractors, machinery f
19、or agriculture and forestry, powered lawn and garden equipment Symbols for operator controls and other displays Part 4: Symbols for forestry machinery ISO 6814:2000, Machinery for forestry Mobile and self-propelled machinery Terms, definitions and classification ISO 8084:2003 Machinery for forestry
20、Operator protective structures Laboratory tests and performance requirements ISO 9244:1995, Earth-moving machinery Safety signs and hazard pictorials General principles ISO 10968:2004, Earth-moving machinery Operators controls ISO 11684:1995, Tractors, machinery for agriculture and forestry, powered
21、 lawn and garden equipment Safety signs and hazard pictorials General principles ISO 13852:1996 Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs BS ISO 19472:2006 Licensed Copy: London South Bank University, London South Bank University, Sun Jun 17 07:15:
22、49 GMT+00:00 2007, Uncontrolled Copy, (c) BSI 2 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 barrel diameter A diameter of the rope drum barrel measured in millimetres See Figure 1. 3.2 flange diameter B diameter of the rope drum flanges m
23、easured in millimetres See Figure 1. 3.3 distance between flanges C distance between the flanges of the rope drum measured in millimetres at half the depth of the flange minus the rope clearance distance See Figure 1. 3.4 depth of flange D radial distance from the outside diameter of the rope drum f
24、lange to the surface on the rope drum barrel measured in millimetres See Figure 1. 3.5 throat clearance E minimum distance from the barrel of the rope drum to the winch housing at any point located between the flanges of the rope drum See Figure 1. 3.6 rope clearance distance S distance from the out
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS ISO 19472 2006
链接地址:https://www.31doc.com/p-3751216.html