DEP 32.80.10.30-Gen.pdf
《DEP 32.80.10.30-Gen.pdf》由会员分享,可在线阅读,更多相关《DEP 32.80.10.30-Gen.pdf(49页珍藏版)》请在三一文库上搜索。
1、TECHNICAL SPECIFICATION INSTRUMENTED PROTECTIVE SYSTEMS DEP 32.80.10.30-Gen. July 1996 DESIGN AND ENGINEERING PRACTICE This document is confidential. Neither the whole nor any part of this document may be disclosed to any third party without the prior written consent of Shell International Oil Produ
2、cts B.V. and Shell International Exploration and Production B.V., The Hague, The Netherlands. The copyright of this document is vested in these PDF created with pdfFactory Pro trial version companies. All rights reserved. Neither the whole nor any part of this document may be reproduced, stored in
3、any retrieval system or transmitted in any form or by any means (electronic, mechanical, reprographic, recording or otherwise) without the prior written consent of the copyright owners. PDF created with pdfFactory Pro trial version PREFACE DEP (Design and Engineering Practice) publications reflect
4、the views, at the time of publication, of: Shell International Oil Products B.V. (SIOP) and Shell International Exploration and Production B.V. (SIEP) and Shell International Chemicals B.V. (SIC) The Hague, The Netherlands, and other Service Companies. They are based on the experience acquired durin
5、g their involvementwith the design, construction, operation and maintenance of processing units and facilities, and they are supplemented with the experience of Group Operating companies. Where appropriate they are based on, or reference is made to, national and international standards and codes of
6、practice. The objective is to set the recommendedstandard for good design and engineeringpractice applied by Group companies operating an oil refinery, gas handling installation, chemical plant, oil and gas production facility, or any other such facility, and thereby to achieve maximum technical and
7、 economic benefit from standardization. The information set forth in these publications is provided to users for their consideration and decision to implement. This is of particular importance where DEPs may not cover every requirement or diversity of condition at each locality. The system of DEPs i
8、s expected to be sufficiently flexible to allow individual operating companies to adapt the information set forth in DEPs to their own environment and requirements. When Contractors or Manufacturers/Suppliers use DEPs they shall be solely responsible for the quality of work and the attainment of the
9、 required design and engineering standards. In particular, for those requirements not specifically covered, the Principal will expect them to follow those design and engineering practices which will achieve the same level of integrity as reflected in the DEPs. If in doubt, the Contractor or Manufact
10、urer/Supplier shall, without detracting from his own responsibility, consult the Principal or its technical advisor. The right to use DEPs is granted by SIOP, SIEP or SIC, in most cases under Service Agreements primarily with companies of the Royal Dutch/Shell Group and other companies receiving tec
11、hnical advice and services from SIOP, SIEP or SIC. Consequently, three categories of users of DEPs can be distinguished: 1)Operating companies having a Service Agreement with SIOP, SIEP, SIC or other Service Company. The use of DEPs by these Operating companies is subject in all respects to the term
12、s and conditions of the relevant Service Agreement. 2)Other parties who are authorized to use DEPs subject to appropriate contractual arrangements. 3)Contractors/subcontractors and Manufacturers/Suppliers under a contract with users referred to under 1) or 2) which requires that tenders for projects
13、, materials supplied or - generally - work performed on behalf of the said users comply with the relevant standards. Subject to any particular terms and conditions as may be set forth in specific agreements with users, SIOP, SIEP and SIC disclaim any liability of whatsoever nature for any damage (in
14、cluding injury or death) suffered by any company or person whomsoever as a result of or in connection with the use, application or implementation of any DEP, combination of DEPs or any part thereof. The benefit of this disclaimer shall inure in all respects to SIOP, SIEP, SIC and/or any company affi
15、liated to these companies that may issue DEPs or require the use of DEPs. Without prejudice to any specific terms in respect of confidentiality under relevant contractual arrangements, DEPs shall not, without the prior written consent of SIOP and SIEP, be disclosed by users to any company or person
16、whomsoever and the DEPs shall be used exclusively for the purpose for which they have been provided to the user. They shall be returned after use, including any copies which shall only be made by users with the express prior written consent of SIOP and SIEP. The copyright of DEPs vests in SIOP and S
17、IEP. Users shall arrange for DEPs to be held in safe custody and SIOP or SIEP may at any time require information satisfactory to them in order to ascertain how users implement this requirement. All administrative queries should be directed to the DEP Administrator in SIOP. NOTE: In addition to DEP
18、publications there are Standard Specifications and Draft DEPs for Development (DDDs). DDDs generally introduce new procedures or techniques that will probably need updating as further experience develops during their use. The above requirements for distribution and use of DEPs are also applicable to
19、 Standard Specifications and DDDs. Standard Specifications and DDDs will gradually be replaced by DEPs. DEP 32.80.10.30-Gen. July 1996 Page 2 PDF created with pdfFactory Pro trial version TABLE OF CONTENTS 1.INTRODUCTION .5 1.1SCOPE 5 1.2DISTRIBUTION, INTENDED USE AND REGULATORY CONSIDERATIONS5 1.3
20、DEFINITIONS 5 1.4ABBREVIATIONS 7 1.5ACTION ITEMS .7 1.6CROSS-REFERENCES 7 2.GENERAL INFORMATION .8 2.1GENERAL8 2.2PARTIES INVOLVED 8 2.3LAYOUT AND OVERVIEW8 3.SCOPE OF SUPPLY.9 3.1SCOPE 9 4.APPLICABLE DOCUMENTS10 5.SYSTEM REQUIREMENTS 11 5.1FUNCTIONALITY 11 5.2CERTIFICATION .12 5.3RESPONSE TIME .13
21、5.4QUALITY .14 5.5REVEALED FAILURE ROBUSTNESS 15 5.6RESPONSIBILITIES 16 5.7STRUCTURE.17 5.8SPARE CAPACITY18 5.9SYSTEM HARDWARE 19 5.10SYSTEM AND APPLICATION SOFTWARE21 5.11COMMUNICATION IPS - DCS22 5.12ALARM SIGNAL HANDLING.24 5.13SEQUENCE OF EVENTS RECORDER25 5.14ENGINEERING INTERFACE 27 5.15PROJEC
22、T TIMING 28 6.HARDWARE CONSTRUCTION REQUIREMENTS 29 6.1CABINETS.29 6.2CABLING.29 6.3EARTHING 30 6.4LABELLING .30 7.POWER SUPPLY32 7.1POWER SUPPLY FACILITIES 32 7.2POWER CONSUMPTION AND TOLERANCE32 7.3POWER DISTRIBUTION .32 7.4BATTERIES.32 8.ENVIRONMENTAL CONDITIONS 34 9.FACTORY ACCEPTANCE TEST .35 9
23、.1GENERAL35 9.2FAT PHASE 135 9.3FAT PHASE 235 10.PACKING AND TRANSPORT 37 10.1PACKING.37 10.2TRANSPORT.37 11.DRAWINGS AND DOCUMENTATION .38 DEP 32.80.10.30-Gen. July 1996 Page 3 PDF created with pdfFactory Pro trial version 11.1GENERAL38 11.2DRAWINGS WITH QUOTATION.38 11.3DRAWINGS AND DOCUMENTATION
24、 AFTER ORDER PLACEMENT. 39 11.4SUPPLIERS DATA BOOKS39 11.5APPROVAL OF DRAWINGS.40 11.6AS-BUILT DRAWINGS40 12.PROJECT MANAGEMENT .41 12.1ORGANISATION .41 12.2PLANNING 41 12.3PROGRESS MEETINGS.41 13.TRAINING .42 14.AFTER SALES SERVICE .43 14.1GENERAL43 14.2SITE SUPPORT 43 15.SPARE PARTS .44 15.1GENERA
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- DEP 32.80.10.30-Gen 32.80 10.30 Gen
链接地址:https://www.31doc.com/p-3753244.html