DEP 33.66.05.33-Gen.pdf
《DEP 33.66.05.33-Gen.pdf》由会员分享,可在线阅读,更多相关《DEP 33.66.05.33-Gen.pdf(71页珍藏版)》请在三一文库上搜索。
1、TECHNICAL SPECIFICATION ELECTRICAL VARIABLE SPEED DRIVE SYSTEMS DEP 33.66.05.33-Gen. March 1995 DESIGN AND ENGINEERING PRACTICE USED BY COMPANIES OF THE ROYAL DUTCH/SHELL GROUP This document is confidential. Neither the whole nor any part of this document may be disclosed to any third party without
2、the prior written consent of Shell Internationale Petroleum Maatschappij B.V., The Hague, the Netherlands. The copyright of this document is vested in Shell Internationale Petroleum Maatschappij PDF created with pdfFactory Pro trial version B.V., The Hague, the Netherlands. All rights reserved. Nei
3、ther the whole nor any part of this document may be reproduced, stored in any retrieval system or transmitted in any form or by any means (electronic, mechanical, reprographic, recording or otherwise) without the prior written consent of the copyright owner. PDF created with pdfFactory Pro trial ver
4、sion PREFACE DEP (Design and Engineering Practice) publications reflect the views, at the time of publication, of: Shell International Oil Products B.V. (SIOP) and Shell International Exploration and Production B.V. (SIEP) and Shell International Chemicals B.V. (SIC) The Hague, The Netherlands, and
5、 other Service Companies. They are based on the experience acquired during their involvementwith the design, construction, operation and maintenance of processing units and facilities, and they are supplemented with the experience of Group Operating companies. Where appropriate they are based on, or
6、 reference is made to, national and international standards and codes of practice. The objective is to set the recommendedstandard for good design and engineeringpractice applied by Group companies operating an oil refinery, gas handling installation, chemical plant, oil and gas production facility,
7、 or any other such facility, and thereby to achieve maximum technical and economic benefit from standardization. The information set forth in these publications is provided to users for their consideration and decision to implement. This is of particular importance where DEPs may not cover every req
8、uirement or diversity of condition at each locality. The system of DEPs is expected to be sufficiently flexible to allow individual operating companies to adapt the information set forth in DEPs to their own environment and requirements. When Contractors or Manufacturers/Suppliers use DEPs they shal
9、l be solely responsible for the quality of work and the attainment of the required design and engineering standards. In particular, for those requirements not specifically covered, the Principal will expect them to follow those design and engineering practices which will achieve the same level of in
10、tegrity as reflected in the DEPs. If in doubt, the Contractor or Manufacturer/Supplier shall, without detracting from his own responsibility, consult the Principal or its technical advisor. The right to use DEPs is granted by SIOP, SIEP or SIC, in most cases under Service Agreements primarily with c
11、ompanies of the Royal Dutch/Shell Group and other companies receiving technical advice and services from SIOP, SIEP or SIC. Consequently, three categories of users of DEPs can be distinguished: 1)Operating companies having a Service Agreement with SIOP, SIEP, SIC or other Service Company. The use of
12、 DEPs by these Operating companies is subject in all respects to the terms and conditions of the relevant Service Agreement. 2)Other parties who are authorized to use DEPs subject to appropriate contractual arrangements. 3)Contractors/subcontractors and Manufacturers/Suppliers under a contract with
13、users referred to under 1) or 2) which requires that tenders for projects, materials supplied or - generally - work performed on behalf of the said users comply with the relevant standards. Subject to any particular terms and conditions as may be set forth in specific agreements with users, SIOP, SI
14、EP and SIC disclaim any liability of whatsoever nature for any damage (including injury or death) suffered by any company or person whomsoever as a result of or in connection with the use, application or implementation of any DEP, combination of DEPs or any part thereof. The benefit of this disclaim
15、er shall inure in all respects to SIOP, SIEP, SIC and/or any company affiliated to these companies that may issue DEPs or require the use of DEPs. Without prejudice to any specific terms in respect of confidentiality under relevant contractual arrangements, DEPs shall not, without the prior written
16、consent of SIOP and SIEP, be disclosed by users to any company or person whomsoever and the DEPs shall be used exclusively for the purpose for which they have been provided to the user. They shall be returned after use, including any copies which shall only be made by users with the express prior wr
17、itten consent of SIOP and SIEP. The copyright of DEPs vests in SIOP and SIEP. Users shall arrange for DEPs to be held in safe custody and SIOP or SIEP may at any time require information satisfactory to them in order to ascertain how users implement this requirement. All administrative queries shoul
18、d be directed to the DEP Administrator in SIOP. NOTE: In addition to DEP publications there are Standard Specifications and Draft DEPs for Development (DDDs). DDDs generally introduce new procedures or techniques that will probably need updating as further experience develops during their use. The a
19、bove requirements for distribution and use of DEPs are also applicable to Standard Specifications and DDDs. Standard Specifications and DDDs will gradually be replaced by DEPs. DEP 33.66.05.33-Gen. March 1995 Page 2 PDF created with pdfFactory Pro trial version TABLE OF CONTENTS 1.INTRODUCTION .6 1
20、.1SCOPE 6 1.2DISTRIBUTION, INTENDED USE AND REGULATORY CONSIDERATIONS6 1.3DEFINITIONS 7 1.4CROSS-REFERENCES 9 2.GENERAL .10 2.1INFORMATION FOR THE PRINCIPAL .10 2.2SCOPE OF SUPPLY .10 2.3RESPONSIBILITY .10 2.4PRE-ORDERING MEETING10 3.STATEMENT OF COMPLIANCE 12 4.BASIC REQUIREMENTS OF THE VSDS.13 4.1
21、SITE CONDITIONS .13 4.2DEGREE OF PROTECTION .14 4.3RATINGS.15 4.4ELECTRICAL SUPPLY SYSTEM 15 4.5INFORMATION TO BE SUBMITTED WITH THE QUOTATION 16 5.PERFORMANCE REQUIREMENTS OF THE VSDS 17 5.1GENERAL17 5.2SYSTEM CONTROL .17 5.3NUMBER OF SEQUENTIAL STARTS.19 5.4TRANSIENT TORQUES19 5.5RUNNING UP TIME (
22、RT) 19 5.6TOTAL RUNNING UP TIME20 5.7TEMPERATURE LIMITATIONS 20 5.8CRITICAL SPEEDS.20 5.9HARMONICS AT THE LINE SIDE.20 5.10ELECTROMAGNETIC COMPATIBILITY .21 5.11PULSATING TORQUES21 5.12PULSATING CURRENTS21 6.CONSTRUCTION REQUIREMENTS OF THE VSDS . 22 6.1GENERAL22 6.2COMPONENT IDENTIFICATION 22 7.CON
23、VERTER TRANSFORMER .23 7.1GENERAL23 7.2TEMPERATURE DETECTORS.23 7.3IMPEDANCE .23 7.4HARMONICS.23 7.5CONSTRUCTION REQUIREMENTS 23 7.6NOISE .23 7.7MASS 23 7.8RATING PLATE.23 8.REACTOR(S) 25 8.1GENERAL25 8.2HARMONICS.25 8.3TEMPERATURE DETECTORS.25 8.4NOISE .25 8.5MASS 25 8.6RATING PLATE.25 8.7LOCATION
24、26 DEP 33.66.05.33-Gen. March 1995 Page 3 PDF created with pdfFactory Pro trial version 9.CONVERTER 27 9.1CONVERTER ELEMENTS 27 9.2RATING OF THE CONVERTER ELEMENTS .28 9.3TRANSIENTS INS THE OUTPUT VOLTAGE OF THE CONVERTER 29 9.4NOISE .30 9.5CABLING/SECONDARY WIRING .31 9.6EARTHING 32 9.7MARKING OF
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- DEP 33.66.05.33-Gen 33.66 05.33 Gen
链接地址:https://www.31doc.com/p-3753861.html