DEP 37.92.10.30-Gen.pdf
《DEP 37.92.10.30-Gen.pdf》由会员分享,可在线阅读,更多相关《DEP 37.92.10.30-Gen.pdf(45页珍藏版)》请在三一文库上搜索。
1、TECHNICAL SPECIFICATION PEDESTAL CRANES (AMENDMENTS/SUPPLEMENTS TO API SPEC 2C) DEP 37.92.10.30-Gen. October 1994 DESIGN AND ENGINEERING PRACTICE USED BY COMPANIES OF THE ROYAL DUTCH/SHELL GROUP This document is confidential. Neither the whole nor any part of this document may be disclosed to any th
2、ird party without the prior written consent of Shell Internationale Petroleum Maatschappij B.V., The Hague, the Netherlands. The copyright of this document is vested in Shell Internationale Petroleum Maatschappij B.V., The Hague, the Netherlands. All rights reserved. Neither the whole nor any part o
3、f this document may be reproduced, stored in any retrieval system or transmitted in any form or by any means (electronic, mechanical, reprographic, recording or otherwise) without the prior written consent of the copyright owner. PDF created with pdfFactory Pro trial version PREFACE DEP (Design and
4、 Engineering Practice) publications reflect the views, at the time of publication, of: Shell International Oil Products B.V. (SIOP) and Shell International Exploration and Production B.V. (SIEP) and Shell International Chemicals B.V. (SIC) The Hague, The Netherlands, and other Service Companies. The
5、y are based on the experience acquired during their involvementwith the design, construction, operation and maintenance of processing units and facilities, and they are supplemented with the experience of Group Operating companies. Where appropriate they are based on, or reference is made to, nation
6、al and international standards and codes of practice. The objective is to set the recommendedstandard for good design and engineeringpractice applied by Group companies operating an oil refinery, gas handling installation, chemical plant, oil and gas production facility, or any other such facility,
7、and thereby to achieve maximum technical and economic benefit from standardization. The information set forth in these publications is provided to users for their consideration and decision to implement. This is of particular importance where DEPs may not cover every requirement or diversity of cond
8、ition at each locality. The system of DEPs is expected to be sufficiently flexible to allow individual operating companies to adapt the information set forth in DEPs to their own environment and requirements. When Contractors or Manufacturers/Suppliers use DEPs they shall be solely responsible for t
9、he quality of work and the attainment of the required design and engineering standards. In particular, for those requirements not specifically covered, the Principal will expect them to follow those design and engineering practices which will achieve the same level of integrity as reflected in the D
10、EPs. If in doubt, the Contractor or Manufacturer/Supplier shall, without detracting from his own responsibility, consult the Principal or its technical advisor. The right to use DEPs is granted by SIOP, SIEP or SIC, in most cases under Service Agreements primarily with companies of the Royal Dutch/S
11、hell Group and other companies receiving technical advice and services from SIOP, SIEP or SIC. Consequently, three categories of users of DEPs can be distinguished: 1)Operating companies having a Service Agreement with SIOP, SIEP, SIC or other Service Company. The use of DEPs by these Operating comp
12、anies is subject in all respects to the terms and conditions of the relevant Service Agreement. 2)Other parties who are authorized to use DEPs subject to appropriate contractual arrangements. 3)Contractors/subcontractors and Manufacturers/Suppliers under a contract with users referred to under 1) or
13、 2) which requires that tenders for projects, materials supplied or - generally - work performed on behalf of the said users comply with the relevant standards. Subject to any particular terms and conditions as may be set forth in specific agreements with users, SIOP, SIEP and SIC disclaim any liabi
14、lity of whatsoever nature for any damage (including injury or death) suffered by any company or person whomsoever as a result of or in connection with the use, application or implementation of any DEP, combination of DEPs or any part thereof. The benefit of this disclaimer shall inure in all respect
15、s to SIOP, SIEP, SIC and/or any company affiliated to these companies that may issue DEPs or require the use of DEPs. Without prejudice to any specific terms in respect of confidentiality under relevant contractual arrangements, DEPs shall not, without the prior written consent of SIOP and SIEP, be
16、disclosed by users to any company or person whomsoever and the DEPs shall be used exclusively for the purpose for which they have been provided to the user. They shall be returned after use, including any copies which shall only be made by users with the express prior written consent of SIOP and SIE
17、P. The copyright of DEPs vests in SIOP and SIEP. Users shall arrange for DEPs to be held in safe custody and SIOP or SIEP may at any time require information satisfactory to them in order to ascertain how users implement this requirement. All administrative queries should be directed to the DEP Admi
18、nistrator in SIOP. NOTE: In addition to DEP publications there are Standard Specifications and Draft DEPs for Development (DDDs). DDDs generally introduce new procedures or techniques that will probably need updating as further experience develops during their use. The above requirements for distrib
19、ution and use of DEPs are also applicable to Standard Specifications and DDDs. Standard Specifications and DDDs will gradually be replaced by DEPs. DEP 37.92.10.30-Gen. October 1994 Page 2 PDF created with pdfFactory Pro trial version TABLE OF CONTENTS PART IINTRODUCTION5 1.1SCOPE.5 1.2DISTRIBUTION
20、, INTENDED USE AND REGULATORY CONSIDERATIONS 5 1.3DEFINITIONS 5 1.4ABBREVIATIONS 6 1.5ACTION ITEMS6 1.6CROSS-REFERENCES.6 1.7ORDER OF PRECEDENCE 7 PART IIAMENDMENTS/SUPPLEMENTS TO API SPEC 2C. 8 GENERAL.8 SECTION 1SCOPE.9 1.1COVERAGE.9 SECTION 2CRANE RATING10 2.3LOAD RATING CHART11 SECTION 3STRUCTUR
21、AL COMPETENCE ESTABLISHED BY STRESS ANALYSIS 12 3.1ANALYSIS12 SECTION 4DESIGN AUTHENTICATION AND TESTING .13 4.3PROVEN DESIGN .13 SECTION 5WIRE ROPE, SHEAVES AND DRUMS.14 5.2WIRE ROPE CONSTRUCTION.14 5.7WIRE ROPE FITTINGS AND END TREATMENT 14 5.8LOAD HOOK, BALL ASSEMBLIES AND LOAD BLOCKS. 14 SECTION
22、 6BOOM HOIST, LOAD HOIST AND TELESCOPING BOOM MECHANISMS .15 SECTION 7SWING MECHANISM 16 7.1SWING MECHANISM 16 7.3SWING CIRCLE ASSEMBLY.16 SECTION 8POWER PLANT.18 8.1GENERAL 18 8.2EXHAUST SYSTEMS 18 8.3FUEL TANKS.18 8.4HAZARDOUS AREA CLASSIFICATION 18 8.5HYDRAULIC TRANSMISSION 18 8.6MINIMUM PROTECTI
23、ON.19 8.7DETECTION EQUIPMENT 19 8.8DRIVE COUPLING.19 8.9ELECTRIC DRIVE20 8.10DIESEL DRIVE 20 SECTION 9CONTROLS.22 9.1GENERAL 22 9.8ALTERNATIVE CONTROL LEVER ARRANGEMENT . 22 SECTION 10 CABS AND ENCLOSURES 23 10.1GENERAL 23 10.2WINDOWS.23 10.3DOORS23 10.4CAB ACCESS 23 10.5PLATFORMS AND WALKWAYS .24 1
24、0.7NOISE LEVEL25 10.8VIBRATION 25 DEP 37.92.10.30-Gen. October 1994 Page 3 PDF created with pdfFactory Pro trial version SECTION 11 MISCELLANEOUS REQUIREMENTS AND EQUIPMENT . 26 11.1BOOM EQUIPMENT 26 11.2GUARDS FOR MOVING PARTS.26 11.4LUBRICATION POINTS AND FLUID FILLS 26 11.7EMERGENCY LOAD LOWERIN
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- DEP 37.92.10.30-Gen 37.92 10.30 Gen
链接地址:https://www.31doc.com/p-3753935.html