DEP 40.10.01.11-Gen.pdf
《DEP 40.10.01.11-Gen.pdf》由会员分享,可在线阅读,更多相关《DEP 40.10.01.11-Gen.pdf(18页珍藏版)》请在三一文库上搜索。
1、MANUAL CAPITAL PROJECT CODING SYSTEM DEP 40.10.01.11-Gen. December 1997 DESIGN AND ENGINEERING PRACTICE This document is confidential. Neither the whole nor any part of this document may be disclosed to any third party without the prior written consent of Shell International Oil Products B.V. and Sh
2、ell International Exploration and Production B.V., The Hague, The Netherlands. The copyright of this document is vested in these companies. All rights reserved. Neither the whole nor any part of this document may be reproduced, stored in any retrieval system or transmitted in any form or by any PDF
3、created with pdfFactory Pro trial version means (electronic, mechanical, reprographic, recording or otherwise) without the prior written consent of the copyright owners. PDF created with pdfFactory Pro trial version PREFACE DEP (Design and Engineering Practice) publications reflect the views, at t
4、he time of publication, of: Shell International Oil Products B.V. (SIOP) and Shell International Exploration and Production B.V. (SIEP) and Shell International Chemicals B.V. (SIC) The Hague, The Netherlands, and other Service Companies. They are based on the experience acquired during their involve
5、mentwith the design, construction, operation and maintenance of processing units and facilities, and they are supplemented with the experience of Group Operating companies. Where appropriate they are based on, or reference is made to, national and international standards and codes of practice. The o
6、bjective is to set the recommendedstandard for good design and engineeringpractice applied by Group companies operating an oil refinery, gas handling installation, chemical plant, oil and gas production facility, or any other such facility, and thereby to achieve maximum technical and economic benef
7、it from standardization. The information set forth in these publications is provided to users for their consideration and decision to implement. This is of particular importance where DEPs may not cover every requirement or diversity of condition at each locality. The system of DEPs is expected to b
8、e sufficiently flexible to allow individual operating companies to adapt the information set forth in DEPs to their own environment and requirements. When Contractors or Manufacturers/Suppliers use DEPs they shall be solely responsible for the quality of work and the attainment of the required desig
9、n and engineering standards. In particular, for those requirements not specifically covered, the Principal will expect them to follow those design and engineering practices which will achieve the same level of integrity as reflected in the DEPs. If in doubt, the Contractor or Manufacturer/Supplier s
10、hall, without detracting from his own responsibility, consult the Principal or its technical advisor. The right to use DEPs is granted by SIOP, SIEP or SIC, in most cases under Service Agreements primarily with companies of the Royal Dutch/Shell Group and other companies receiving technical advice a
11、nd services from SIOP, SIEP or SIC. Consequently, three categories of users of DEPs can be distinguished: 1)Operating companies having a Service Agreement with SIOP, SIEP, SIC or other Service Company. The use of DEPs by these Operating companies is subject in all respects to the terms and condition
12、s of the relevant Service Agreement. 2)Other parties who are authorized to use DEPs subject to appropriate contractual arrangements. 3)Contractors/subcontractors and Manufacturers/Suppliers under a contract with users referred to under 1) or 2) which requires that tenders for projects, materials sup
13、plied or - generally - work performed on behalf of the said users comply with the relevant standards. Subject to any particular terms and conditions as may be set forth in specific agreements with users, SIOP, SIEP and SIC disclaim any liability of whatsoever nature for any damage (including injury
14、or death) suffered by any company or person whomsoever as a result of or in connection with the use, application or implementation of any DEP, combination of DEPs or any part thereof. The benefit of this disclaimer shall inure in all respects to SIOP, SIEP, SIC and/or any company affiliated to these
15、 companies that may issue DEPs or require the use of DEPs. Without prejudice to any specific terms in respect of confidentiality under relevant contractual arrangements, DEPs shall not, without the prior written consent of SIOP and SIEP, be disclosed by users to any company or person whomsoever and
16、the DEPs shall be used exclusively for the purpose for which they have been provided to the user. They shall be returned after use, including any copies which shall only be made by users with the express prior written consent of SIOP and SIEP. The copyright of DEPs vests in SIOP and SIEP. Users shal
17、l arrange for DEPs to be held in safe custody and SIOP or SIEP may at any time require information satisfactory to them in order to ascertain how users implement this requirement. All administrative queries should be directed to the DEP Administrator in SIOP. NOTE: In addition to DEP publications th
18、ere are Standard Specifications and Draft DEPs for Development (DDDs). DDDs generally introduce new procedures or techniques that will probably need updating as further experience develops during their use. The above requirements for distribution and use of DEPs are also applicable to Standard Speci
19、fications and DDDs. Standard Specifications and DDDs will gradually be replaced by DEPs. DEP 40.10.01.11-Gen. December 1997 Page 2 PDF created with pdfFactory Pro trial version TABLE OF CONTENTS 1.INTRODUCTION .4 1.1SCOPE 4 1.2DISTRIBUTION, APPLICABILITY AND REGULATORY CONSIDERATIONS 4 1.3DEFINITIO
20、NS 4 1.4CROSS-REFERENCES 4 2.CODING SYSTEM.5 3.PROJECT IDENTIFICATION 6 3.1GENERAL6 3.2PROJECT NUMBER .6 3.3SYMBOL7 4.CODING OF PROJECT AND CONTRACT DOCUMENTS AND DRAWINGS .8 5.NUMBERING OF REQUISITIONS AND INDENTS FOR PROJECT MATERIALS PROCUREMENT.9 5.1GENERAL9 5.2SELECTION OF GROUP CODE NUMBER.9 5
21、.3SERIAL NUMBER .10 6.PROJECT COST ALLOCATION AND COST ANALYSIS 11 6.1GENERAL11 6.2COSTS OF SUPPLY AND CONSTRUCTION11 6.3SUPPLY-AND-CONSTRUCTION CONTRACTS.11 6.4HOLDING ACCOUNT NUMBERS.12 6.5COLLECTIVE ACCOUNT NUMBERS.12 7.REFERENCES 13 APPENDICES APPENDIX 1NUMBERING OF GROUPS .14 DEP 40.10.01.11-Ge
22、n. December 1997 Page 3 PDF created with pdfFactory Pro trial version 1.INTRODUCTION 1.1SCOPE This DEP specifies requirements and gives recommendations for the coding system to be used in the administration of capital projects. This is a revision of the DEP of the same number dated April 1983. 1.2D
23、ISTRIBUTION, APPLICABILITY AND REGULATORY CONSIDERATIONS Unless otherwise authorised by SIOP and SIEP, the distribution of this DEP is confined to companies forming part of the Royal Dutch/Shell Group or managed by a Group company, and to Contractors nominated by them (i.e. the distribution code is
24、“C“, as defined in DEP 00.00.05.05-Gen.). This DEP is intended for use in oil refineries, chemical plants, gas plants and, where applicable, exploration and production facilities and supply/marketing installations. If national and/or local regulations exist in which some of the requirements may be m
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- DEP 40.10.01.11-Gen 40.10 01.11 Gen
链接地址:https://www.31doc.com/p-3754150.html