BS-ISO-2328-1993.pdf
《BS-ISO-2328-1993.pdf》由会员分享,可在线阅读,更多相关《BS-ISO-2328-1993.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS ISO 2328:1993 Implementation of ISO 2328:1993 Fork lift trucks Hook-on type fork arms and fork arm carriages Mounting dimensions Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 15:24:02 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 2328:1993 This British Standard, havi
2、ng been prepared under the direction of the Engineering Sector Board, was published under the authority of the Standards Board and comes into effect on 15 March 1996 BSI 03-1999 The following BSI references relate to the work on this standard: Committee reference MHE/7 Draft for comment 92/79701 DC
3、ISBN 0 580 25494 1 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee MHE/7, Industrial trucks, upon which the following bodies were represented: Automated Material Handling Systems Association British Gas plc British Indust
4、rial Truck Association Castor Manufacturers (UK) Association Department of Trade and Industry (Engineering Markets Division) Food and Drink Federation Health and Safety Executive Ministry of Defence Ports Safety Organisation Amendments issued since publication Amd. No.DateComments Licensed Copy: she
5、ffieldun sheffieldun, na, Sun Nov 26 15:24:02 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 2328:1993 BSI 03-1999i Contents Page Committees responsible Inside front cover National forewordii Forewordiii Text of ISO 23281 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 15:24:02 GMT+00:00 2
6、006, Uncontrolled Copy, (c) BSI BS ISO 2328:1993 ii BSI 03-1999 National foreword This British Standard reproduces verbatim ISO 2328:1993 and implements it as the UK national standard. It supersedes BS 5639-2:1978 which is withdrawn. This British Standard is published under the direction of the Engi
7、neering Sector Board whose Technical Committee MHE/7 has the responsibility to: aid enquirers to understand the text; present to the responsible international committee any enquiries on interpretation, or proposals for change, and keep UK interests informed; monitor related international and Europea
8、n developments and promulgate them in the UK. NOTEInternational and European Standards, as well as overseas standards, are available from Customer Services, BSI, 389 Chiswick High Road, London W4 4AL. A British Standard does not purport to include all the necessary provisions of a contract. Users of
9、 British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the ISO title page, pages ii to iv, pages 1 t
10、o 3 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 15:24:02 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Lice
11、nsed Copy: sheffieldun sheffieldun, na, Sun Nov 26 15:24:02 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 2328:1993(E) ii BSI 03-1999 Contents Page Forewordiii 1Scope1 2Normative references1 3Definitions1 4Dimensions1 5Additional requirements1 Figure 1 Fork arm and fork carrier2 Table 1 Mounting di
12、mensions of fork arms3 Table 2 Mounting dimensions of fork carrier3 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 15:24:02 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 2328:1993(E) BSI 03-1999iii Foreword ISO (the International Organization for Standardization) is a worldwide federation o
13、f national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. In
14、ternational organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical
15、committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 2328 was prepared by Technical Committee ISO/TC 110, Industrial trucks, Sub-Committee SC 2, Safety of
16、 powered industrial trucks. This second edition cancels and replaces the first edition (ISO 2328:1977). Class 4 in Table 1 and Table 2 has been extended; class 5 is new, as is clause 5. Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 15:24:02 GMT+00:00 2006, Uncontrolled Copy, (c) BSI iv blan
17、k Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 15:24:02 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 2328:1993(E) BSI 03-19991 1 Scope This International Standard specifies the dimensions and some additional requirements of fork carriers and hook-on type fork arms for fork-lift trucks, t
18、o permit interchangeability of fork arms and/or other attachments, related to the truck rated capacity and type of fork arm. 2 Normative reference The following standard contains provisions which, through reference in this text, constitute provisions of this International Standard. At the time of pu
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS ISO 2328 1993
链接地址:https://www.31doc.com/p-3755777.html