FORD-ESA-M4D429-A2-2008.pdf
《FORD-ESA-M4D429-A2-2008.pdf》由会员分享,可在线阅读,更多相关《FORD-ESA-M4D429-A2-2008.pdf(3页珍藏版)》请在三一文库上搜索。
1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2008 03 13 N-STATUS No replacement named; Fixed numbering in 5 G. Kowalski 1987 06 02 Revised Re-typed - CDQ2-171050-C9 1981 11 02 Released SM2-101 Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 3 POLY
2、AMIDE (PA) 6, MINERAL FILLED - ESA-M4D429-A1 ELECTROPLATING GRADE - EXTERIOR POLYAMIDE (PA) 6, MINERAL FILLED - EXTERIOR - ESA-M4D429-A2 PAINTED POLYAMIDE (PA) 6, MINERAL FILLED - EXTERIOR - ESA-M4D429-A3 PAINTED NOT TO BE USED FOR NEW DESIGN 1. SCOPE The materials defined by these specifications ar
3、e injectable molding grade mineral filled polyamides (nylons) with high mechanical and thermal properties, good surface finish, excellent moldability, and dimensional stability. 2. APPLICATION These specifications were released originally for materials used in both painted or decorative chrome plate
4、d wheel cover or ornament applications. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 MOLDING COMPOUND A1/A2 A3 3.4.1 Melting Point, C 210 - 22
5、5 210 - 225 (FLTM BO 120-02 or ASTM D 789) 3.4.2 Moisture Content, %, max 0.20 0.20 (ASTM D 789) 3.4.3 Filler Content, by Weight, % 38 - 42 32 - 36 (ASTM D 2584, 1 h at 600 C) ENGINEERING MATERIAL SPECIFICATION ESA-M4D429-A1/A2/A3 Copyright 2008, Ford Global Technologies, LLC Page 2 of 3 3.5 MOLDED
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- FORD ESA M4D429 A2 2008
链接地址:https://www.31doc.com/p-3755962.html