DD-CLC-TS-50131-2-6-2004.pdf
《DD-CLC-TS-50131-2-6-2004.pdf》由会员分享,可在线阅读,更多相关《DD-CLC-TS-50131-2-6-2004.pdf(20页珍藏版)》请在三一文库上搜索。
1、DRAFT FOR DEVELOPMENT DD CLC/TS 50131-2-6:2004 Alarm systems Intrusion systems Part 2-6: Requirements for opening contacts (magnetic) ICS 13.310 ? Licensed Copy: London South Bank University, London South Bank University, Sun Dec 10 14:16:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI DD CLC/TS 50131
2、-2-6:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 6 October 2004 BSI 6 October 2004 ISBN 0 580 44555 0 National foreword This Draft for Development is the official English language version of CLC/TS 50131-2-6:2004. This publication is
3、 not to be regarded as a British Standard. It is being issued in the Draft for Development series of publications and is of a provisional nature because it is a provisional European draft. It should be applied on this provisional basis, so that information and experience of its practical application
4、 may be obtained. Comments arising from the use of this Draft for Development are requested so that UK experience can be reported to the European organization responsible for its conversion to a European Standard. A review of this publication will be initiated 2 years after its publication by the Eu
5、ropean organization so that a decision can be taken on its status at the end of its 3-year life. Notification of the start of the review period will be made in an announcement in the appropriate issue of Update Standards. According to the replies received by the end of the review period, the respons
6、ible BSI Committee will decide whether to support the conversion into a European Standard, to extent the life of the Technical Specification or to withdraw it. Comments should be sent in writing to the Secretary of BSI Subcommittee GW/1/1, Alarm components, at 389 Chiswick High Road, London W4 4AL,
7、giving the document reference and clause number and proposing, where possible, an appropriate revision of the text. A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European p
8、ublications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. Summary of pages This document comprises a front cov
9、er, an inside front cover, the CLC/TS title page, pages 2 to 16, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: London South Bank University
10、, London South Bank University, Sun Dec 10 14:16:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI TECHNICAL SPECIFICATION CLC/TS 50131-2-6 SPECIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION August 2004 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrot
11、echnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. CLC/TS 50131-2-6:2004 E ICS 13.310 English version Alarm system
12、s - Intrusion systems Part 2-6: Requirements for opening contacts (magnetic) Systmes dalarme - Systmes de dtection dintrusion Partie 2-6: Exigences pour contacts magntiques Alarmanlagen - Einbruchmeldeanlagen Teil 2-6: Anforderungen an ffnungsmelder (Magnetkontakte) This Technical Specification was
13、approved by CENELEC on 2004-05-04. CENELEC members are required to announce the existence of this TS in the same way as for an EN and to make the TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force. CENELEC members are the
14、 national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and Uni
15、ted Kingdom. Licensed Copy: London South Bank University, London South Bank University, Sun Dec 10 14:16:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI CLC/TS 50131-2-6:2004 - 2 - Foreword This Technical Specification was prepared by the Technical Committee CENELEC TC 79, Alarm systems. The text of t
16、he draft was submitted to the vote at the meeting of TC 79 in Madrid and was approved by CENELEC as CLC/TS 50131-2-6 on 2004-05-04. Standstill is maintained. The following date was fixed: - latest date by which the existence of the TS (doa) 2004-11-04 has to be announced at national level NOTE Lates
17、t date by which the TS has to be voted as EN: 2 years maximum after dav of TS. Licensed Copy: London South Bank University, London South Bank University, Sun Dec 10 14:16:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI - 3 - CLC/TS 50131-2-6:2004 Contents Page 1 Scope .4 2 Normative references.4 3 Def
18、initions and abbreviations .4 4 Functional requirements.5 4.1 Indication signals or messages5 4.2 Detection 6 4.3 Operational requirements.6 4.4 Tamper security7 4.5 Electrical requirements.8 4.6 Environmental classification and conditions.8 5 Marking, identification and documentation.9 5.1 Marking
19、and/or identification .9 5.2 Documentation .9 6 Testing9 6.1 General test conditions.9 6.2 Basic test of detection capability 10 6.3 Verification of detection performance.10 6.4 Switch-on delay, time interval between signals and indication of detection .10 6.5 Tamper security10 6.6 Electrical tests
20、11 6.7 Environmental classification and conditions.12 6.8 Marking and documentation.13 Annex A (normative) Format of standard test magnets15 Annex B (normative) General test matrix .16 Annex C (informative) List of small tools suitable for testing immunity of casing to attack 17 Figure A.1 - Format
21、of standard test magnets14 Table 1 Indication signals or messages 6 Table 2 - Tamper security requirements.7 Table 3 - Electrical requirements8 Table 4 - Environmental tests, operational.13 Table 5 - Environmental tests, endurance13 Licensed Copy: London South Bank University, London South Bank Univ
22、ersity, Sun Dec 10 14:16:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI CLC/TS 50131-2-6:2004 - 4 - Introduction This Technical Specification is a specification for opening contacts (magnetic) used as part of intrusion detection systems installed in buildings. It provides for four security grades and
23、 the first three environmental classes. The purpose of an opening contact (magnetic) is to detect a displacement of a door or window from a closed position. A signal or message is generated when the detector registers a displacement of the door or window from the closed position. The detector shall
24、provide the necessary range of signals or messages to be used by the rest of the intrusion detection system. This specification is only concerned with the requirements and tests for opening contacts (magnetic). Other types of detector are covered by other documents identified as CLC/TS 50131-2-x. 1
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- DD CLC TS 50131 2004
链接地址:https://www.31doc.com/p-3760999.html