GMNA-GMP.PA6.046R-1997.pdf
《GMNA-GMP.PA6.046R-1997.pdf》由会员分享,可在线阅读,更多相关《GMNA-GMP.PA6.046R-1997.pdf(2页珍藏版)》请在三一文库上搜索。
1、VND.GM GMPwPAb.OLibR-ENGL I,997 - 9lJOb379 OOO=l837 7b7 m GENERAL MOTORS ENGINEERING STANDARDS I Materials and Processes - Plastics I NYLON 6 - RECYCLED 15% GLASS FIBER REINFORCED/25% MINERAL FILLED, HEAT STABILIZED GMP.PA6.046R 1 SCOPE. This specification covers the properties of a recycled 15% gla
2、ss fiber reinforcedl25% mineral filled, heat stabilized nylon 6, pellet form, injection molding compound. 1.1 APPLICATIONS. Typical applications include the fol- lowing: engine control module bracket and cover. 1.2 RECYCLED MATERIALS. Materials under this specifl- cation shall have a minimum of 25%
3、recycled content by weight, as defined in GM502M. Post-consumer and/or post- industrial materials apply. 1.2.1 Viigin material, GMP.PA6.012, may be substituted for this recycled material provided parts made from “virgin” mate- rial have been approved by the Production Part Approval Process (PPAP). 2
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- GMNA GMP PA6 046 1997
链接地址:https://www.31doc.com/p-3765692.html