IEC-61076-4-114-2003.pdf
《IEC-61076-4-114-2003.pdf》由会员分享,可在线阅读,更多相关《IEC-61076-4-114-2003.pdf(50页珍藏版)》请在三一文库上搜索。
1、INTERNATIONAL STANDARD IEC 61076-4-114 First edition 2003-02 Connectors for electronic equipment Part 4-114: Printed board connectors Detail specification for two-part connector with integrated shielding function having a grid of 1 mm 1,5 mm Reference number IEC 61076-4-114:2003(E) Publication numbe
2、ring As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer,
3、 respectively, to the base publication, the base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content
4、 reflects current technology. Information relating to this publication, including its validity, is available in the IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the
5、 technical committee which has prepared this publication, as well as the list of publications issued, is also available from the following: IEC Web Site (www.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (http:/www.iec.ch/searchpub/cur_fut.htm) enables you to search
6、 by a variety of criteria including text searches, technical committees and date of publication. On-line information is also available on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (http:/w
7、ww.iec.ch/online_news/ justpub/jp_entry.htm) is also available by email. Please contact the Customer Service Centre (see below) for further information. Customer Service Centre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre
8、: Email: custserviec.ch Tel: +41 22 919 02 11 Fax: +41 22 919 03 00 INTERNATIONAL STANDARD IEC 61076-4-114 First edition 2003-02 Connectors for electronic equipment Part 4-114: Printed board connectors Detail specification for two-part connector with integrated shielding function having a grid of 1
9、mm 1,5 mm IEC 2003 Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission, 3, ru
10、e de Varemb, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmailiec.ch Web: www.iec.ch S For price, see current catalogue PRICE CODE Commission Electrotechnique Internationale International Electrotechnical Commission -,-,- 2 61076-4-114 IE
11、C:2003(E) CONTENTS FOREWORD 4 1General data 6 1.1Recommended method of mounting 6 1.2Ratings and characteristics. 6 1.3Normative references . 7 1.4Marking 7 1.5IEC Type designation . 8 1.6Ordering information. 8 2Technical information. 9 2.1Abbreviations 9 2.2Survey of styles and variants 9 2.3Infor
12、mation on application10 2.4Contact arrangements .11 3Dimensional information .12 3.1General .12 3.2Isometric view and common features .13 3.3Engagement (mating) information 17 3.4Fixed board connectors .19 3.5Free board connectors.22 3.6Accessories.25 3.7Mounting information for fixed board connecto
13、rs25 3.8Mounting information for free board connectors .26 3.9Gauges27 4Characteristics28 4.1Climatic category.28 4.2Electrical .28 4.3Mechanical 30 5Test schedule .31 5.1General .31 5.2Arrangement for dynamic stress tests32 5.3Test schedule tables35 Annex A (normative) Requirements for application
14、to mechanical structures 42 A.1 Scope .42 A.2 Requirements for use of connectors42 Figure 1 Free and fixed board connectors for modular arrangement.10 Figure 2 Contact arrangements 11 Figure 3 Contact arrangements 12 Figure 4 Isometric view 13 Figure 5 Height dimensions14 Figure 6 Width dimensions .
15、15 Figure 7 Depth dimensions.16 Figure 8 Mating conditions .17 Figure 8a First contact point.18 61076-4-114 IEC:2003(E) 3 Figure 9 Style A .19 Figure 10 Style B .20 Figure 11 Terminations 21 Figure 12 Style A .22 Figure 13 Details X, Y, Z 23 Figure 14 Style B .24 Figure 15 Hole pattern on backplane2
16、5 Figure 16 Hole pattern on printed boards .26 Figure 17 Gauge dimensions27 Figure 18 Current carrying capacity29 Figure 19 Measuring points29 Figure 20 Arrangement for dynamic stress tests.32 Figure 21 Wiring of specimen.32 Figure 22 Arrangement for flammability test .33 Figure 23 Test board for fi
17、xed and free board connectors.34 Figure A.1 Plug-in unit dimension.43 Table 1 Rated voltage . 6 Table 2 Contact arrangement and number of contacts. 9 Table 3 Styles of termination. 9 Table 4 Complete connectors.11 Table 5 Isometric view and common features .14 Table 6 Height dimensions .14 Table 7 W
18、idth dimensions 15 Table 8 Depth dimensions16 Table 9 Ranges of safe contact performance17 Table 10 Dimensions of terminations and printed board thickness21 Table 11 Hole pattern on backplane .26 Table 12 Hole pattern on printed boards.26 Table 13 Gauges27 Table 14 Climatic Category 28 Table 15 Mini
19、mum creepage and clearance distances28 Table 16 Voltage proof.28 Table 17 Number of mechanical operations30 Table 18 Insertion and withdrawal forces30 Table 19 Vibration severity30 Table 20 Number of specimens 31 Table 21 Dynamic stress tests32 Table 22 Test board for fixed and free board connectors
20、34 Table A.1 Dimensions required in accordance with IEC 60917-2-2 .42 -,-,- 4 61076-4-114 IEC:2003(E) INTERNATIONAL ELECTROTECHNICAL COMMISSION _ CONNECTORS FOR ELECTRONIC EQUIPMENT Part 4-114: Printed board connectors Detail specification for two-part connector with integrated shielding function ha
21、ving a grid of 1 mm 1,5 mm FOREWORD 1)The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote international co-operation on all questions con
22、cerning standardization in the electrical and electronic fields. To this end and in addition to other activities, the IEC publishes International Standards. Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this
23、 preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the t
24、wo organizations. 2)The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested National Committees. 3)The documents produced ha
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- IEC 61076 114 2003
链接地址:https://www.31doc.com/p-3767527.html