guide for the application of faluted circuit indicators for 200 A,Single-phase underground residential distribution.pdf
《guide for the application of faluted circuit indicators for 200 A,Single-phase underground residential distribution.pdf》由会员分享,可在线阅读,更多相关《guide for the application of faluted circuit indicators for 200 A,Single-phase underground residential distribution.pdf(18页珍藏版)》请在三一文库上搜索。
1、_ The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2001 by the Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 13 April 2001. Printed in the United States of America. Print: ISBN 0-7381-2722-1 SH9
2、4901 PDF: ISBN 0-7381-2723-X SS94901 No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. IEEE Std 1216-2000 (R2006) IEEE Guide for the Application of Faulted Circuit Indicators for 200 A, Si
3、ngle-Phase Underground Residential Distribution (URD) Sponsor Transmission and Distribution Committee of the IEEE Power Engineering Society Reaffirmed 14 September 2006 Approved 7 December 2000 IEEE-SA Standards Board Abstract: This application guide provides information on what a basic faulted circ
4、uit indicator (FCI) is designed to do, and describes methods for selecting FCIs. The application of FCIs to single- phase, 200 A, underground residential distribution (URD) circuits is described. Keywords: overcurrent protection, power distribution Copyright The Institute of Electrical and Electroni
5、cs Engineers, Inc. Provided by IHS under license with IEEELicensee=IHS Employees/1111111001, User=OConnor, Maurice Not for Resale, 04/28/2007 23:54:33 MDTNo reproduction or networking permitted without license from IHS -,-,- iiCopyright 2001 IEEE. All rights reserved. IEEE Standards documents are de
6、veloped within the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a consensus develop- ment process, approved by the American National Standards Institute, which brings together volunteers
7、representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute and serve with- out compensation. While the IEEE administers the process and establishes rules to promote fairness in the consensus devel- opment process, the IEEE does
8、not independently evaluate, test, or verify the accuracy of any of the information contained in its standards. Use of an IEEE Standard is wholly voluntary. The IEEE disclaims liability for any personal injury, property or other dam- age, of any nature whatsoever, whether special, indirect, consequen
9、tial, or compensatory, directly or indirectly resulting from the publication, use of, or reliance upon this, or any other IEEE Standard document. The IEEE does not warrant or represent the accuracy or content of the material contained herein, and expressly disclaims any express or implied warranty,
10、including any implied warranty of merchantability or fitness for a specific purpose, or that the use of the material contained herein is free from patent infringement. IEEE Standards documents are supplied “AS IS.” The existence of an IEEE Standard does not imply that there are no other ways to prod
11、uce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE Standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments receive
12、d from users of the standard. Every IEEE Standard is subjected to review at least every five years for revi- sion or reaffirmation. When a document is more than five years old and has not been reaffirmed, it is reasonable to conclude that its contents, although still of some value, do not wholly ref
13、lect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE Standard. In publishing and making this document available, the IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity. No
14、r is the IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing this, and any other IEEE Standards document, should rely upon the advice of a com- petent professional in determining the exercise of reasonable care in any given circumstances. Interpre
15、tations: Occasionally questions may arise regarding the meaning of portions of standards as they relate to specific applications. When the need for interpretations is brought to the attention of IEEE, the Institute will initiate action to prepare appropriate responses. Since IEEE Standards represent
16、 a consensus of concerned interests, it is important to ensure that any interpretation has also received the concurrence of a balance of interests. For this reason, IEEE and the members of its soci- eties and Standards Coordinating Committees are not able to provide an instant response to interpreta
17、tion requests except in those cases where the matter has previously received formal consideration. Comments for revision of IEEE Standards are welcome from any interested party, regardless of membership affiliation with IEEE. Suggestions for changes in documents should be in the form of a proposed c
18、hange of text, together with appropriate supporting comments. Comments on standards and requests for interpretations should be addressed to: Secretary, IEEE-SA Standards Board 445 Hoes Lane P.O. Box 1331 Piscataway, NJ 08855-1331 USA IEEE is the sole entity that may authorize the use of certificatio
19、n marks, trademarks, or other designations to indicate com- pliance with the materials set forth herein. Authorization to photocopy portions of any individual standard for internal or personal use is granted by the Institute of Electrical and Electronics Engineers, Inc., provided that the appropriat
20、e fee is paid to Copyright Clearance Center. To arrange for payment of licensing fee, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; (978) 750-8400. Permission to photocopy portions of any individual standard for educational classroom use can
21、also be obtained through the Copyright Clearance Center. Note: Attention is called to the possibility that implementation of this standard may require use of subject mat- ter covered by patent rights. By publication of this standard, no position is taken with respect to the existence or validity of
22、any patent rights in connection therewith. The IEEE shall not be responsible for identifying patents for which a license may be required by an IEEE standard or for conducting inquiries into the legal validity or scope of those patents that are brought to its attention. Copyright The Institute of Ele
23、ctrical and Electronics Engineers, Inc. Provided by IHS under license with IEEELicensee=IHS Employees/1111111001, User=OConnor, Maurice Not for Resale, 04/28/2007 23:54:33 MDTNo reproduction or networking permitted without license from IHS -,-,- Copyright 2001 IEEE. All rights reserved.iii Introduct
24、ion This introduction is not a part of IEEE Std 1216-2000, IEEE Guide for the Application of Faulted Circuit Indicators for 200 A, Single-Phase Underground Residential Distribution (URD). This guide is intended to be a supplement to the training in high-voltage electrical equipment, established safe
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- guide for the application of faluted circuit indicators 200 A Single-phase underground residential distribution Single
链接地址:https://www.31doc.com/p-3767734.html