《IEC-60404-8-6-1999.pdf》由会员分享,可在线阅读,更多相关《IEC-60404-8-6-1999.pdf(42页珍藏版)》请在三一文库上搜索。
1、NORME INTERNATIONALE CEI IEC INTERNATIONAL STANDARD 60404-8-6 Deuxime dition Second edition 1999-04 Matriaux magntiques Partie 8-6: Spcifications pour matriaux particuliers Matriaux mtalliques magntiquement doux Magnetic materials Part 8-6: Specifications for individual materials Soft magnetic metal
2、lic materials Numro de rfrence Reference number CEI/IEC 60404-8-6:1999 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 01:39:06 MSTNo reproduction or networking permitted without
3、 license from IHS -,-,- Numros des publications Depuis le 1er janvier 1997, les publications de la CEI sont numrotes partir de 60000. Publications consolides Les versions consolides de certaines publications de la CEI incorporant les amendements sont disponibles. Par exemple, les numros ddition 1.0,
4、 1.1 et 1.2 indiquent respectivement la publication de base, la publication de base incorporant lamendement 1, et la publication de base incorporant les amendements 1 et 2. Validit de la prsente publication Le contenu technique des publications de la CEI est constamment revu par la CEI afin quil ref
5、lte ltat actuel de la technique. Des renseignements relatifs la date de reconfir- mation de la publication sont disponibles dans le Catalogue de la CEI. Les renseignements relatifs des questions ltude et des travaux en cours entrepris par le comit technique qui a tabli cette publication, ainsi que l
6、a liste des publications tablies, se trouvent dans les documents ci- dessous: Site web de la CEI* Catalogue des publications de la CEI Publi annuellement et mis jour rgulirement (Catalogue en ligne)* Bulletin de la CEI Disponible la fois au site web de la CEI* et comme priodique imprim Terminologie,
7、 symboles graphiques et littraux En ce qui concerne la terminologie gnrale, le lecteur se reportera la CEI 60050: Vocabulaire Electro- technique International (VEI). Pour les symboles graphiques, les symboles littraux et les signes dusage gnral approuvs par la CEI, le lecteur consultera la CEI 60027
8、: Symboles littraux utiliser en lectrotechnique, la CEI 60417: Symboles graphiques utilisables sur le matriel. Index, relev et compilation des feuilles individuelles, et la CEI 60617: Symboles graphiques pour schmas. * Voir adresse site web sur la page de titre. Numbering As from 1 January 1997 all
9、IEC publications are issued with a designation in the 60000 series. Consolidated publications Consolidated versions of some IEC publications including amendments are available. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publication incor- por
10、ating amendment 1 and the base publication incorporating amendments 1 and 2. Validity of this publication The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to the date of the reconfirma
11、tion of the publication is available in the IEC catalogue. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as the list of publications issued, is to be found at the following IEC sources: IEC web
12、site* Catalogue of IEC publications Published yearly with regular updates (On-line catalogue)* IEC Bulletin Available both at the IEC web site* and as a printed periodical Terminology, graphical and letter symbols For general terminology, readers are referred to IEC 60050: International Electrotechn
13、ical Vocabulary (IEV). For graphical symbols, and letter symbols and signs approved by the IEC for general use, readers are referred to publications IEC 60027: Letter symbols to be used in electrical technology, IEC 60417: Graphical symbols for use on equipment. Index, survey and compilation of the
14、single sheets and IEC 60617: Graphical symbols for diagrams. * See web site address on title page. Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 01:39:06 MSTNo reproduction or
15、networking permitted without license from IHS -,-,- NORME INTERNATIONALE CEI IEC INTERNATIONAL STANDARD 60404-8-6 Deuxime dition Second edition 1999-04 Matriaux magntiques Partie 8-6: Spcifications pour matriaux particuliers Matriaux mtalliques magntiquement doux Magnetic materials Part 8-6: Specifi
16、cations for individual materials Soft magnetic metallic materials Commission Electrotechnique Internationale International Electrotechnical Commission Pour prix, voir catalogue en vigueur For price, see current catalogue IEC 1999 Droits de reproduction rservs Copyright - all rights reserved Aucune p
17、artie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lditeur. No part of this publication may be reproduced or utilized in any form or by any means, ele
18、ctronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission3, rue de Varemb Geneva, Switzerland Telefax: +41 22 919 0300e-mail: inmailiec.ch IEC web site http:/www.iec.ch CODE PRIX PRICE CODEQ Copyright Inte
19、rnational Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 01:39:06 MSTNo reproduction or networking permitted without license from IHS -,-,- 2 60404-8-6 CEI:1999 SOMMAIRE Pages AVANT-PROPOS . 4 Articles
20、 1 Domaine dapplication 6 2 Rfrences normatives. 6 3 Dfinitions 8 4 Classification . 12 4.1 Alliage de classe A (fer pur) 12 4.2 Alliage de classe C (fer-silicium) . 12 4.3 Alliage de classe E (fer-nickel) 12 4.4 Alliage de classe F (fer-cobalt) 12 5 Dsignation 12 6 Spcifications gnrales. 14 6.1 Com
21、position chimique et procd de fabrication 14 6.2 Conditions de livraison 14 7 Spcifications techniques . 16 7.1 Proprits magntiques. 16 7.2 Caractristiques gomtriques et tolrances . 16 8 Contrle. 18 8.1 Gnralits . 18 8.2 Prlvement des chantillons 18 8.3 Proprits magntiques. 20 8.4 Caractristiques go
22、mtriques et tolrances . 20 8.5 Essais complmentaires 20 9 Rclamations . 22 10 Indications la commande. 22 11 Certification 22 Bibliographie 32 Tableau 1 Composition chimique des classes dalliages selon la CEI 60404-1. 22 Tableau 2 Valeurs minimales des permabilits pour tle et bande Mesures en couran
23、t alternatif (50 Hz ou 60 Hz), paisseur 0,05 mm 0,38 mm 24 Tableau 3 Proprits magntiques en courant continu pour barre, billette, rond, tle, bande et fil, paisseur ou diamtre suprieur 0,05 mm Echantillon S.R., L.R. ou E.S. 26 Tableau 4 Facteur daccroissement de la permabilit maximale pour tle et ban
24、de Echantillon de contrle L.R., mesures en courant alternatif (50 Hz ou 60 Hz) 28 Tableau 5 Spcifications dimensionnelles, selon la CEI 60635, pour noyaux torodaux en bandes enroules 28 Tableau 6 Tolrances sur lpaisseur des bandes et tles lamines froid . 28 Tableau 7 Tolrances sur la largeur des tle
25、s et bandes. 30 Tableau 8 Tolrances sur les dimensions des barres, ronds et fils tirs froid 30 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 01:39:06 MSTNo reproduction or netw
26、orking permitted without license from IHS -,-,- 60404-8-6 IEC:1999 3 CONTENTS Page FOREWORD 5 Clause 1 Scope 7 2 Normative references. 7 3 Definitions 9 4 Classification . 13 4.1 Alloy class A (pure iron) 13 4.2 Alloy class C (silicon-iron) . 13 4.3 Alloy class E (nickel-iron) 13 4.4 Alloy class F (
27、cobalt-iron) 13 5 Designation 13 6 General requirements. 15 6.1 Chemical composition and production process 15 6.2 Delivery condition 15 7 Technical requirements 17 7.1 Magnetic properties. 17 7.2 Geometric characteristics and tolerances 17 8 Inspection and testing 19 8.1 General. 19 8.2 Selection o
28、f samples. 19 8.3 Magnetic properties. 21 8.4 Geometric characteristics and tolerances 21 8.5 Retests . 21 9 Complaints. 23 10 Ordering information 23 11 Certification 23 Bibliography . 33 Table 1 Chemical composition of the alloy classes in accordance with IEC 60404-1. 23 Table 2 Minimum permeabili
29、ty requirements for sheet and strip AC measurement (50 Hz or 60 Hz), thickness 0,05 mm to 0,38 mm 25 Table 3 DC magnetic property requirements for bar, billet, rod, sheet, strip and wire, thickness or diameter greater than 0,05 mm S.R., L.R. or E.S. specimen . 27 Table 4 Maximum permeability rise fa
30、ctor for sheet and strip L.R. test specimen, a.c. measurement (50 Hz or 60 Hz) 29 Table 5 Dimensional requirements for toroidal strip-wound cores according to IEC 60635 29 Table 6 Tolerances on thickness of cold-rolled sheet and strip 29 Table 7 Tolerances on width of sheet and strip 31 Table 8 Tole
31、rances on dimensions of cold-worked bar, rod and wire 31 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 01:39:06 MSTNo reproduction or networking permitted without license from
32、IHS -,-,- 4 60404-8-6 CEI:1999 COMMISSION LECTROTECHNIQUE INTERNATIONALE _ MATRIAUX MAGNTIQUES Partie 8-6: Spcifications pour matriaux particuliers Matriaux mtalliques magntiquement doux AVANT-PROPOS 1)La CEI (Commission Electrotechnique Internationale) est une organisation mondiale de normalisation
33、 compose de lensemble des comits lectrotechniques nationaux (Comits nationaux de la CEI). La CEI a pour objet de favoriser la coopration internationale pour toutes les questions de normalisation dans les domaines de llectricit et de llectronique. A cet effet, la CEI, entre autres activits, publie de
34、s Normes internationales. Leur laboration est confie des comits dtudes, aux travaux desquels tout Comit national intress par le sujet trait peut participer. Les organisations internationales, gouvernementales et non gouvernementales, en liaison avec la CEI, participent galement aux travaux. La CEI c
35、ollabore troitement avec lOrganisation Internationale de Normalisation (ISO), selon des conditions fixes par accord entre les deux organisations. 2)Les dcisions ou accords officiels de la CEI concernant les questions techniques reprsentent, dans la mesure du possible un accord international sur les
36、sujets tudis, tant donn que les Comits nationaux intresss sont reprsents dans chaque comit dtudes. 3)Les documents produits se prsentent sous la forme de recommandations internationales. Ils sont publis comme normes, rapports techniques ou guides et agrs comme tels par les Comits nationaux. 4)Dans l
37、e but dencourager lunification internationale, les Comits nationaux de la CEI sengagent appliquer de faon transparente, dans toute la mesure possible, les Normes internationales de la CEI dans leurs normes nationales et rgionales. Toute divergence entre la norme de la CEI et la norme nationale ou rg
38、ionale correspondante doit tre indique en termes clairs dans cette dernire. 5)La CEI na fix aucune procdure concernant le marquage comme indication dapprobation et sa responsabilit nest pas engage quand un matriel est dclar conforme lune de ses normes. 6) Lattention est attire sur le fait que certai
39、ns des lments de la prsente Norme internationale peuvent faire lobjet de droits de proprit intellectuelle ou de droits analogues. La CEI ne saurait tre tenue pour responsable de ne pas avoir identifi de tels droits de proprit et de ne pas avoir signal leur existence. La Norme internationale CEI 6040
40、4-8-6 a t tablie par le comit dtudes 68 de la CEI: Matriaux magntiques tels qualliages et aciers. Cette deuxime dition annule et remplace la premire dition parue en 1986 et lamendement 1 (1992). Cette deuxime dition constitue une rvision technique. Le texte de cette norme est issu des documents suiv
41、ants: FDISRapport de vote 68/197/FDIS68/200/RVD Le rapport de vote indiqu dans le tableau ci-dessus donne toute information sur le vote ayant abouti lapprobation de cette norme. Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/111111100
42、1, User=Wing, Bernie Not for Resale, 03/10/2007 01:39:06 MSTNo reproduction or networking permitted without license from IHS -,-,- 60404-8-6 IEC:1999 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ MAGNETIC MATERIALS Part 8-6: Specifications for individual materials Soft magnetic metallic materials FO
43、REWORD 1)The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote international co-operation on all questions concerning standardization in th
44、e electrical and electronic fields. To this end and in addition to other activities, the IEC publishes International Standards. Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. Internatio
45、nal, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2)The forma
46、l decisions or agreements of the IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested National Committees. 3)The documents produced have the form of recommendation
47、s for international use and are published in the form of standards, technical reports or guides and they are accepted by the National Committees in that sense. 4)In order to promote international unification, IEC National Committees undertake to apply IEC International Standards transparently to the maximum extent possible in their national and regional standards. Any divergence between the IEC Standard and the corresponding national or regional standard shall be clearly indicated in the latter. 5)The IEC provides no marking procedure t
链接地址:https://www.31doc.com/p-3767857.html