IEC-61076-4-113-2002.pdf
《IEC-61076-4-113-2002.pdf》由会员分享,可在线阅读,更多相关《IEC-61076-4-113-2002.pdf(42页珍藏版)》请在三一文库上搜索。
1、INTERNATIONAL STANDARD IEC 61076-4-113 First edition 2002-11 Connectors for electronic equipment Printed board connectors Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications Reference number IEC 61076-4-1
2、13:2002(E) Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition num
3、bers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, th
4、us ensuring that the content reflects current technology. Information relating to this publication, including its validity, is available in the IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work i
5、n progress undertaken by the technical committee which has prepared this publication, as well as the list of publications issued, is also available from the following: IEC Web Site (www.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (http:/www.iec.ch/searchpub/cur_fu
6、t.htm) enables you to search by a variety of criteria including text searches, technical committees and date of publication. On-line information is also available on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently
7、issued publications (http:/www.iec.ch/online_news/ justpub/jp_entry.htm) is also available by email. Please contact the Customer Service Centre (see below) for further information. Customer Service Centre If you have any questions regarding this publication or need further assistance, please contact
8、 the Customer Service Centre: Email: custserviec.ch Tel: +41 22 919 02 11 Fax: +41 22 919 03 00 -,-,- INTERNATIONAL STANDARD IEC 61076-4-113 First edition 2002-11 Connectors for electronic equipment Printed board connectors Part 4-113: Detail specification for two-part connectors having 5 rows with
9、a grid of 2,54 mm for printed boards and backplanes in bus applications IEC 2002 Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from t
10、he publisher. International Electrotechnical Commission, 3, rue de Varemb, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmailiec.ch Web: www.iec.ch R For price, see current catalogue PRICE CODE Commission Electrotechnique Internationale In
11、ternational Electrotechnical Commission -,-,- 2 61076-4-113 IEC:2002(E) CONTENTS FOREWORD 4 1General data 6 1.1Recommended method of mounting 6 1.2Ratings and characteristics. 6 1.3Normative references . 6 1.4Marking 7 1.5IEC type designation. 7 1.6Ordering information. 8 2Technical information. 8 2
12、.1Definitions 8 2.2Information on application. 9 2.3Contact arrangements 9 3Dimensional information .10 3.1General .10 3.2Isometric view and common features .11 3.3Engagement (mating) information 13 3.4Fixed board connectors .16 3.5Free board connectors.18 3.6Mounting information for fixed board con
13、nectors20 3.7Mounting information for free board connectors .21 3.8Gauges22 4Characteristics23 4.1Climatic category.23 4.2Electrical .23 4.3Mechanical 24 5Test schedule .26 5.1General .26 5.2Test schedule tables30 Figure 1 Contact arrangements . 9 Figure 2 Contact arrangements 10 Figure 3 Isometric
14、view 11 Figure 4 Depth dimensions.12 Figure 5 Electrical engagement length .13 Figure 6 First contact point.13 Figure 7 Perpendicular to engagement (mating) direction.14 Figure 8 Inclination.14 Figure 9 Planarity of mounted connectors 15 Figure 10 Fixed board connector dimensions .16 Figure 11 Termi
15、nations 17 Figure 12 Free board connector dimensions.18 Figure 13 Terminations 19 Figure 14 Hole pattern on panels .20 61076-4-113 IEC:2002(E) 3 Figure 15 Hole pattern on printed boards .21 Figure 16 Gauge dimensions22 Figure 17 Current-carrying capacity24 Figure 18 Measuring points27 Figure 19 Dyna
16、mic stress test arrangement .27 Figure 20 Arrangement for testing static load, axial28 Figure 21 Wiring of specimen.28 Figure 22 Arrangement for flammability test .29 Figure 23 Test printed board for fixed and free board connectors.29 Table 1 Rated voltage . 6 Table 2 Isometric view and common featu
17、res .11 Table 3 Depth dimensions12 Table 4 Fixed board connector dimensions 17 Table 5 Dimension of the termination .17 Table 6 Free board connector dimensions19 Table 7 Hole pattern on panels.20 Table 8 Hole pattern on printed boards 21 Table 9 Gauges22 Table 10 Climatic category.23 Table 11 Minimu
18、m creepage and clearance distances23 Table 12 Voltage proof.23 Table 13 Number of mechanical operations24 Table 14 Contact retention in insert25 Table 15 Number of specimens 26 -,-,- 4 61076-4-113 IEC:2002(E) INTERNATIONAL ELECTROTECHNICAL COMMISSION _ CONNECTORS FOR ELECTRONIC EQUIPMENT PRINTED BOA
19、RD CONNECTORS Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications FOREWORD 1)The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising all national ele
20、ctrotechnical committees (IEC National Committees). The object of the IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, the IEC publishes International Standards. Their pr
21、eparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. The IEC collaborates cl
22、osely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2)The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an international consensus of opinion on the r
23、elevant subjects since each technical committee has representation from all interested National Committees. 3)The documents produced have the form of recommendations for international use and are published in the form of standards, technical specifications, technical reports or guides and they are a
24、ccepted by the National Committees in that sense. 4)In order to promote international unification, IEC National Committees undertake to apply IEC International Standards transparently to the maximum extent possible in their national and regional standards. Any divergence between the IEC Standard and
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- IEC 61076 113 2002
链接地址:https://www.31doc.com/p-3768155.html