IEC-61169-8-2007.pdf
《IEC-61169-8-2007.pdf》由会员分享,可在线阅读,更多相关《IEC-61169-8-2007.pdf(38页珍藏版)》请在三一文库上搜索。
1、 INTERNATIONAL STANDARD IEC 61169-8 QC 222400 First edition 2007-02 Radio-frequency connectors Part 8: Sectional specification RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock Characteristic impedance 50 (type BNC) Reference number IEC 61169-8:2007(E)
2、Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 03:21:43 MSTNo reproduction or networking permitted without license from IHS -,-,- Publication numbering As from 1 January 1997 al
3、l IEC publications are issued with a designation in the 60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base pub
4、lication, the base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology.
5、Information relating to this publication, including its validity, is available in the IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has
6、 prepared this publication, as well as the list of publications issued, is also available from the following: IEC Web Site (www.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to search by a variety of criteria including text searche
7、s, technical committees and date of publication. On-line information is also available on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (www.iec.ch/online_news/ justpub) is also available by e
8、mail. Please contact the Customer Service Centre (see below) for further information. Customer Service Centre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custserviec.ch Tel: +41 22 919 02 11 Fax: +41 22 919 03 00
9、 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 03:21:43 MSTNo reproduction or networking permitted without license from IHS -,-,- INTERNATIONAL STANDARD IEC 61169-8 QC 222400 F
10、irst edition 2007-02 Radio-frequency connectors Part 8: Sectional specification RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock Characteristic impedance 50 (type BNC) IEC 2007 Copyright - all rights reserved No part of this publication may be reproduc
11、ed or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission, 3, rue de Varemb, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone: +41 22 919 02 11 Telefax: +
12、41 22 919 03 00 E-mail: inmailiec.ch Web: www.iec.ch V For price, see current catalogue PRICE CODE Commission Electrotechnique Internationale International Electrotechnical Commission Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/111
13、1111001, User=Wing, Bernie Not for Resale, 03/10/2007 03:21:43 MSTNo reproduction or networking permitted without license from IHS -,-,- 2 61169-8 IEC:2007(E) CONTENTS FOREWORD.4 1 Scope.6 2 Normative references .6 3 IEC type designation 6 4 Interface dimensions 7 4.1 Dimensions General purpose conn
14、ectors7 5 Mechanical gauges and standard test connectors.11 5.1 Mechanical gauges11 5.2 Standard test connectors.14 6 Outline dimensions.19 7 Quality assessment procedures19 7.1 General.19 7.2 Ratings and characteristics .19 7.3 Test schedule and inspection requirements.21 7.4 Procedures23 8 Instruc
15、tions for preparation of detail specifications .23 8.1 General.23 8.2 Identification of the Detail specification .24 8.3 Identification of the component24 8.4 Performance24 8.5 Marking, ordering information and related matters.24 8.6 Selection of tests, test conditions and severities24 8.7 Blank det
16、ail specification pro-forma for type BNC connector26 Annex A (normative) Information for interface dimensions of 75 characteristic impedance connector with unspecified reflection factor.31 Bibliography35 Figure 1 Connector with pin-centre contact (for dimensions, see Table 1)7 Figure 2 Details of ba
17、yonet lock.8 Figures 3 and 4 Details of alternative coupling grooves .8 Figure 5 Details of pin-centre contact.8 Figure 6 Connector with socket-centre contact (for dimensions, see Table 2) 10 Figure 7 Details of socket-centre contact .10 Figure 8 Gauge for outer contact of pin connector11 Figure 9 G
18、auge pin for socket-centre contact.12 Figure 10 Dimensions of gauge for performance test (see Table 5)13 Figure 11 Dimensions of connector (see Table 6) 15 Figure 12 Dimensions of centre contact (see Table 6)15 Figure 13 Dimensions of connector (see Table 7) 17 Figure 14 Dimensions of centre contact
19、 (see Table 7)17 Figure A.1 Connector with pin centre contact and Figure A.2 Details of bayonet lock31 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 03:21:43 MSTNo reproduction
20、 or networking permitted without license from IHS -,-,- 61169-8 IEC:2007(E) 3 Figure A.3 Details of alternative coupling grooves31 Figure A.4 Details of pin centre contact 31 Figure A.5 Connector with socket centre contact33 Figure A.6 Position of coupling studs .33 Figure A.7 Details of socket cent
21、re contact 33 Table 1 Dimensions for connector with pin-centre contact9 Table 2 Dimensions for connector with socket-centre contact 11 Table 3 Dimensions for gauges for outer contact of pin connector12 Table 4 Dimensions for gauge pin for socket-centre contact.12 Table 5 Dimensions of gauge for perf
22、ormance test 14 Table 6 Dimensions of centre contact 16 Table 7 Dimensions for standard test connector.18 Table 8 Preferred climatic categories (see IEC 60068-1):.19 Table 9 Ratings and characteristics .20 Table 10 Acceptance tests.21 Table 11 Periodic tests 22 Table A.1 Dimensions for pin connector
23、.32 Table A.2 Dimensions for socket connector .34 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 03:21:43 MSTNo reproduction or networking permitted without license from IHS -,-
24、,- 4 61169-8 IEC:2007(E) INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RADIO-FREQUENCY CONNECTORS Part 8: Sectional specification RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock Characteristic impedance 50 (type BNC) FOREWORD 1) The International Electr
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- IEC 61169 2007
链接地址:https://www.31doc.com/p-3769149.html