IEEE-C37.37-1996.pdf
《IEEE-C37.37-1996.pdf》由会员分享,可在线阅读,更多相关《IEEE-C37.37-1996.pdf(20页珍藏版)》请在三一文库上搜索。
1、IEEE Std C37.37-1996 (Revision of IEEE Std C37.37-1979) IEEE Loading Guide for AC High-Voltage Air Switches (in Excess of 1000 V) Sponsor IEEE Switchgear Committee of the IEEE Power Engineering Society Approved 20 June 1996 IEEE Standards Board Abstract: An aid to users to determine (1) the allowabl
2、e continuous current class (ACCC), (2) the continuous load current capabilities of air switches under various conditions of ambient temperature, and (3) the emergency load current capabilities of air switches under various conditions of ambient temperature, is provided. This guide does not apply to
3、switches used in enclosures covered by IEEE Std C27.20.2-1993, IEEE Std C37.20.3-1996, IEEE Std C37.23-1987, IEEE Std C37.71-1984, and ANSI C37.72-1987. Keywords: ACCC, allowable continuous current class, current capabilities, emergency loading, high- voltage air switches, outdoor switches The Insti
4、tute of Electrical and Electronics Engineers, Inc. 345 East 47th Street, New York, NY 10017-2394, USA Copyright 1996 by the Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 1996. Printed in the United States of America. ISBN 1-55937-828-X No part of this publica
5、tion may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEELicensee=IHS Employees/1111111001, User=OConnor, Mau
6、rice Not for Resale, 04/28/2007 23:34:15 MDTNo reproduction or networking permitted without license from IHS -,-,- ii IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Board. Members of the committees serve voluntarily an
7、d without compensation. They are not necessarily members of the Institute. The standards developed within IEEE represent a consensus of the broad expertise on the subject within the Institute as well as those activities outside of IEEE that have expressed an interest in participating in the developm
8、ent of the standard. Use of an IEEE Standard is wholly voluntary. The existence of an IEEE Standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE Standard. Furthermore, the viewpoint expre
9、ssed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. Every IEEE Standard is subjected to review at least every five years for revision or reaffirmation. When a document is
10、more than five years old and has not been reaffirmed, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE Standard. Comments for revis
11、ion of IEEE Standards are welcome from any interested party, regardless of membership affiliation with IEEE. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Interpretations: Occasionally questions may arise regar
12、ding the meaning of portions of standards as they relate to specific applications. When the need for interpretations is brought to the attention of IEEE, the Institute will initiate action to prepare appropriate responses. Since IEEE Standards represent a consensus of all concerned interests, it is
13、important to ensure that any interpretation has also received the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to interpretation requests except in those cases where the
14、 matter has previously received formal consideration. Comments on standards and requests for interpretations should be addressed to: Secretary, IEEE Standards Board 445 Hoes Lane P.O. Box 1331 Piscataway, NJ 08855-1331 USA Authorization to photocopy portions of any individual standard for internal o
15、r personal use is granted by the Institute of Electrical and Electronics Engineers, Inc., provided that the appropriate fee is paid to Copyright Clearance Center. To arrange for payment of licensing fee, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 019
16、23 USA; (508) 750-8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Note: Attention is called to the possibility that implementation of this standard may require use of subject matter covered b
17、y patent rights. By publication of this standard, no position is taken with respect to the existence or validity of any patent rights in connection therewith. The IEEE shall not be responsible for identifying all patents for which a license may be required by an IEEE standard or for conducting inqui
18、ries into the legal validity or scope of those patents that are brought to its attention. Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEELicensee=IHS Employees/1111111001, User=OConnor, Maurice Not for Resale, 04/28/2007 23:34:15 MDTNo re
19、production or networking permitted without license from IHS -,-,- iii Introduction This introduction is not part of IEEE Std C37.37-1996, IEEE Loading Guide for AC High-Voltage Air Switches (in Excess of 1000 V). IEEE Std C37.37-1996 is a loading guide that designates the continuous and emergency lo
20、ad current capabilities of air switches over a range of ambient temperatures. This is accomplished through a family of loadability factor curves. The Standards Committee on Power Switchgear, C37, which reviewed and approved this standard, had the following personnel at the time of approval: E. Byron
21、, Chair M. Calwise, Secretary A. K. McCabe (Executive Vice-Chair of High-Voltage Switchgear Standards) J. C. Scott (Executive Vice-Chair of Low-Voltage Switchgear Standards) D. L. Swindler (Executive Vice-Chair of IEC Activities) Organization RepresentedName of Representative Association of Iron and
22、 Steel Engineers(vacant) Electric Light and Power Group M. C. Mingoia D. J. Borchart T. E. Bruck J. H. Provanzana J. D. Stewart G. R. Brandenberger (Alt.) A. K. McCabe (Alt.) Institute of Electrical and Electronics Engineers.D. F. Peelo L. B. Beard H. L. Bowles P. W. Dwyer A. Monroe D. Signon S. C.
23、Atkinson (Alt.) D. G. Kumbera (Alt.) L. V. McCall (Alt.) National Electrical Manufacturers Association .R. Garzon W. Kracht H. L. Miller T. Olson S. Stone E. Byron (Alt.) G. T. Jones (Alt.) G. Sakats (Alt.) D. L. Swindler (Alt.) Tennessee Valley Authority.D. N. Reynolds Testing Laboratory GroupL. Fr
24、ier P. Notarian U.S. Department of the Army, Office of the Chief of Engineers.J. A. Gilson U.S. Department of the Interior, Bureau of Reclamation R. Arnold U.S. Department of the Navy, Naval Construction Battalion Center R. L. Clark Western Area Power Administration.G. D. Birney Copyright The Instit
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- IEEE C37 37 1996
链接地址:https://www.31doc.com/p-3769526.html