IEEE-1460-1996-R2008.pdf
《IEEE-1460-1996-R2008.pdf》由会员分享,可在线阅读,更多相关《IEEE-1460-1996-R2008.pdf(24页珍藏版)》请在三一文库上搜索。
1、IEEE Std 1460-1996 (R2008) IEEE Guide for the Measurement of Quasi-Static Magnetic and Electric Fields Sponsor IEEE Standards Coordinating Committee on Non-Ionizing Radiation (SCC28) Approved 10 December 1996 Reaffirmed 12 June 2008 IEEE Standards Board Abstract: A listing of possible measurement go
2、als related to characterizing quasi-static magnetic and electric fields and possible methods for their accomplishment is provided. Keywords: measurement protocols, power frequency, power frequency harmonic fields, quasi-static magnetic and electric fields The Institute of Electrical and Electronics
3、Engineers, Inc. 345 East 47th Street, New York, NY 10017-2394, USA Copyright 1997 by the Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 1997. Printed in the United States of America. ISBN 1-55937-873-5 No part of this publication may be reproduced in any form,
4、 in an electronic retrieval system or otherwise, without the prior written permission of the publisher. Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEELicensee=IHS Employees/1111111001, User=Japan, IHS Not for Resale, 08/04/2008 02:56:42
5、MDTNo reproduction or networking permitted without license from IHS -,-,- ii IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Board. Members of the committees serve voluntarily and without compensation. They are not nece
6、ssarily members of the Institute. The standards developed within IEEE represent a consensus of the broad expertise on the subject within the Institute as well as those activities outside of IEEE that have expressed an interest in participating in the development of the standard. Use of an IEEE Stand
7、ard is wholly voluntary. The existence of an IEEE Standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE Standard. Furthermore, the viewpoint expressed at the time a standard is approved a
8、nd issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. Every IEEE Standard is subjected to review at least every five years for revision or reaffirmation. When a document is more than five years old and has not been
9、 reaffirmed, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE Standard. Comments for revision of IEEE Standards are welcome from an
10、y interested party, regardless of membership affiliation with IEEE. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Interpretations: Occasionally questions may arise regarding the meaning of portions of standards
11、 as they relate to specific applications. When the need for interpretations is brought to the attention of IEEE, the Institute will initiate action to prepare appropriate responses. Since IEEE Standards represent a consensus of all concerned interests, it is important to ensure that any interpretati
12、on has also received the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to interpretation requests except in those cases where the matter has previously received formal co
13、nsideration. Comments on standards and requests for interpretations should be addressed to: Secretary, IEEE Standards Board 445 Hoes Lane P.O. Box 1331 Piscataway, NJ 08855-1331 USA Authorization to photocopy portions of any individual standard for internal or personal use is granted by the Institut
14、e of Electrical and Electronics Engineers, Inc., provided that the appropriate fee is paid to Copyright Clearance Center. To arrange for payment of licensing fee, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; (508) 750-8400. Permission to pho
15、tocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Note: Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this s
16、tandard, no position is taken with respect to the existence or validity of any patent rights in connection therewith. The IEEE shall not be responsible for identifying all patents for which a license may be required by an IEEE standard or for conducting inquiries into the legal validity or scope of
17、those patents that are brought to its attention. Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEELicensee=IHS Employees/1111111001, User=Japan, IHS Not for Resale, 08/04/2008 02:56:42 MDTNo reproduction or networking permitted without lice
18、nse from IHS -,-,- iii Introduction (This introduction is not part of IEEE Std 1460-1996, IEEE Guide for the Measurement of Quasi-Static Magnetic and Electric Fields.) As an aid for groups and individuals interested in developing magnetic and/or electric field measurement protocols, this guide descr
19、ibes different magnetic and electric field measurement methods that can accomplish specific measurement goals. A single measurement approach is not given because the measurement strategies and instrumentation requirements will differ depending on the measurement environment of interest and the goals
20、 of a measurement program. For example, the measurement protocols and instrumentation for characterizing electric and magnetic fields from power lines will differ significantly from those for characterizing fields from video display terminals. Frequent reference is made to a companion document for t
21、his guide: IEEE Std 1308-1994, IEEE Recommended Practice for Instrumentation: Specifications for Magnetic Flux Density and Electric Field Strength Meters10 Hz to 3 kHz. IEEE Std 1308-1994 describes the types of available instrumentation used for measuring quasi-static magnetic and electric fields, t
22、heir principles of operation, definitions of terminology, calibration procedures, and sources of measurement uncertainty. At the time this guide was completed, the ELF Field Measurements Working Group had the following membership: Martin Misakian, Chair Edward Aslan Quirino Balzano Howard Bassen Dav
23、id Dini James B. Hatfield Stewart Maurer Robert G. Olsen Ron C. Petersen Richard A. Tell Don Umbdenstock Ian Walker Other individuals who have contributed review and comment are as follows: Fred M. DietrichWilham T. Kaune The following persons were on the balloting committee: Eleanor R. Adair J. Rob
24、ert Ashley Quirino Balzano Howard Bassen John P. Bavin John A. Bergeron Tony E. Branan William Brenner Edwin Bronaugh Charles R. Buffler Jerrold Bushberg Stephen V. Chiusano C. K. Chou Jules Cohen William T. Croker Robert A. Curtis James M. Daly John A. D Andrea John J. DeFrank John DeLorge Louis D.
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- IEEE 1460 1996 R2008
链接地址:https://www.31doc.com/p-3769626.html